PROVN OF ALTERATION/ REPAIR OF CHARPOY AND ALSO PROVIDE ADDL 150 CHORPOY FOR THE TPS OF 3 MADRAS AT KATIHAR MILITARY STATION AND PROVN OF FURNITURE FOR CONSTRUCTION OF GARAGE FOR PARKING AIRCRAFT REFUELLER AT AF STATION PURNEA.

Amount

(A) WOODEN FURNITURE: Job No. (EAC/CAP/200/14 FBSU/2016-17)

Board Notice 1200mm wide x 1200mm high with Glass complete (Drg No. FD-117(M)

Notice Board 4’x5’ (Drg No. FD-1066)

Hat Stand with Mirror (Drg No. FD-233)

Table Centre 2 tier (Drg No. FD-274)

Sofa Set 2 Seater with cushion (Drg No. FD-373)

Total of SCHEDULE 'A' PART-I

(B) STEEL FURNITURE: Job No. (EAC/CAP/200/14 FBSU/2016-17)

Chair Steel Tubular with Arms {Drg No FD-75(M)}

Charpoy with Hard Top (Drg No -FD/MAP-II/01)

Table Office Officers(Steel) (Drg No FD-1003)

Table Office Clerk (Steel) (Drg No FD-1004)

Almirah Large(Steel) with Shelves (Drg No. FD-1031)

Almirah medium (Steel) with Shelves (Drg No. FD-1032)

Stool Steel 305x305x510 mm {Drg No. FD-81(M)}

Rack 6 Tiers (steel) 1905x915x500mm (Drg No. FD-1038)

(B) STEEL FURNITURE: Job No. (111SA/17C/59D/REV/11/ 2021-22)

Charpoy GI with ply top (Drg No. FD-220)

S & F of 12 mm thick plywood BWR of approved quality size 1908mm X 900 mm, cutting into correct dimension and rounding at edges to give it a perfect shape with 14 Nos suitable dia and length of nuts and bolts all as directed.(Drg No. FD-220)

Labour only for drilling holes 14 nos on GI charpoy three each on long rails, two on short rails and two on the flat iron welded on the two rails with a suitable drilling machine. All as directed by the Engr - in - Charge.(Drg No. FD-220)

S & F GI Elbow 32 mm dia heavy duty ISI marked after taking out old U/S GI Elbow all as specified and directed by Engr -in - Charge.(Drg No. FD-220)

S & F GI check nut 32 mm size, heavy duty ISI marked after taking out old u/s check nut from Charpoy GI pipe, all as specified and directed by Engineer - in Charge.(Drg No. FD-220)

Taking out broken/damaged long rail from charpoy GI pipe and S&F new long rail of charpoy GI pipe 32 mm dia med grade, ISI marked including cutting, threadig, all as specified and directed by Engineer - in - Charge. (Drg No. FD-220)

Taking out broken/damaged long rail from charpoy GI pipe and fixing short rail made out from old pipe including cutting for required size and shape & threading and fixing (Old pipe shall be obtained from Ser No 5 all as specified and directed by Engineer - in - Charge.(Drg No. FD-220)

Taking out unserveable legs from charpoy GI pipe and fixing leg made out of old pipe including cutting of required size and shape & threading and fixing (Old pipe shall be obtained from Ser No 05 and 06 all as specified and directed by Engineer - in - Charge.

Total of SCHEDULE 'A' PART-II

(C) TRADE PATTERN FURNITURE: Job No. (EAC/CAP/200/14 FBSU/2016-17)

Chair Revolving Executive (Make: Godrej Interio (Halo very high back Model No. FU9P12TX069SXXXX)

Chair Revolving Mid Back with arms (Make: Godrej Interio Regerio- mid back Insitu Moulding FURG02RX13TSSXXXX)

Computer Table (Make: Godrej Interio; Model No Companion C9 Model No FUC9XXXX059SXXX) )

Chair Computer Revolving (Steel) (Make: Godrej; Model No PCH 7042R FU7042RXV12SXXXX)

Visitor chair with Cushion (Make: Godrej Interio;Kareena visitor Model No FU9P069SXXXX) )

Total of SCHEDULE 'A' PART-III

M/S. MAJUMDER CONSTRUCTION