SPECIAL REPAIR WORKS

Amount

CIVIL WORKS

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls a.Dismantling Brick work

Cemet Concrete 1:4:8(one cement,four sand, eight aggregate) using 40mm gauge HBG stone jelly including cost of all materials and labour charges etc., complete

Brick Work in C.M 1:5 (one cement,Five sand) mix using II class chamber burnt bricks of size 9" x 4 3/8" x2 a)foundation and basement

Providing formwork for Centering the soffits of all R.C.C. works centering , shutter charges up to 3m height with M.S.sheets 90 X 60 cm 10mm gauge stiffened withwelded M.S. angles of size and removing the formwork after necessary curring period etc., complete as directed - 10m2 Coloum footing & plinth beam

Plain Cement concrete 1:2:4 (one cment two sand and four aggregate) using 20mm gauge hard broken granite stone jelly including cost and conveyance all materials and labour charges for mixing, laying, compacting and finishing dewatering, side shuttering wherever necessary, curing etc., complete for foundation etc., complying with standard specification.

Plastering with Cement mortor 1:5 (one cement,five sand) with 12 mm thick including cost of all materials,labour charges for finishing and curring etc., complete

Painting two coats of newly platered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, and including plater of paris

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Finishing the floor with premium grade designed vetrified tiles of size 600 x 600 x 8 mm of best approved colour quality laid over 20mm thick cement mortar 1:3 bed as joint free and pointing with the same colour cement added with the colouring pigments at 3.0 kg/m² etc., complete complying with standard specification

Supplying and laying of profiled colour Galvolume sheet with combination 55AI:43.4Zn:1,6SI of TCT bend type 0.40 mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile /CR sheets of approved quality for roofing with nessasary fixing arrangements like 65mm abd long hexagonal head screws with EPDM rubber seal, etc., complete complying with standard specification and as directed by the departmental officers,during execution of work

Supplying and fabrication of M.S Angle section vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat.For purlins M.S square pipe has to be fabricated as per the corporation officers. A.100mm MS pipe

B.120mmx60mmx6mm box pipe

C.100mmx50mmx6mm box pipe

Supply, laying jointing PVC pipes of approve quality and best variety confirming to ISS and with ISI mark of the following sizes .including cutting threading and fixing PVC /GI specials but excluding the cost of such specials and fixing to wall with necessary teak wood plugs , clamps screws and making holes on the walls,floors and making good the dismantled portion to the original condition with necessary scaffolding charges etc., comlete complying with standard specification A.110mm 6kgf

Sri Ganesh Constructions