SPECIAL REPAIR TO BLDG NO P-298 , PROVN OF TOILET BLOCK AT BHAGAT LINE UNDER AGE B/R-III OF GE(S) MEERUT CANTT

Amount

Dismantling ceiling boards of any description and any thickness including cover fillets complete all as specified and directed.

Supply and fix false ceiling (work at appx 9mtr height ) , 600x600mm grid with Armstrong "Prelude XL 32' grid system and 12mm thick mineral fibre acoustic tile 'RH-99 classic lite' with suspension of GI wire not less than 4mm dia or as per manufacture's instructions complete all as specified and directed by Engr-in-Charge.

Supply & fix 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed

Desmantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

Material and labour for non skid joint free coloured ceramic tiles square/rectangular of size 400x400x7-8mm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles of approved shade of size 450X300X7 to 8mm thick as in vertical surface such as skirting, dado etc set and jointed in neat cement slurry and pointed in white/ coloured cement to match, laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Taking down or up steel tubing and connections bore of pipe 15mm complete all as specified and directed.

All as per item No 7.00 but 20mm bore of pipe complete all as specified and directed.

Supply and fix 15mm bore GI tubing medium grade with all fittings and fixed to walls or laid on floor complete all as specified and directed

All as per item No 9.00 above but 20 mm bore complete all as specified and directed

Supply and fix in repair one piece EWC vitireous china combined with vitireos china flushing cistern ( duel flush system) incl soft close seat cover,hinges, fixing accessories set ,cistern fittings and making good to floor to match the existing complete all as specified and directed. Make CERA Cat No S1013113S or equivalent in/hindware/parryware.

Supply and fix chrome plate central hole Basin mixer with pop up waste system with 450mm long copper pipes and Brass Nuts : Make : JAQUAR Cat No CON-169KNB/CON-613 KNB or equivalent in Hindware/Parryware complete all as specified and directed.

Supply and fix CP Angular Stop Cock with flange complete all as specified and directed. Make JAQUAR Cat No CON-059KN/OPP-15053PM ORP-10053PM or equivalent in MARC/ Player

Supply and fix in repairs 15mm bore PVC connection 450 mm long with brass coupling on both ends of superior quality complete all as specified and directed.

Supply and fix in repair CP brass bib cock with wall flange complete all as specified and directed.Make :- JAQUAR CON 107KN or equivalent in MARC/ Player

Supply and fix towel rack 600mm long stainless steel complete all as specified and directed.Make- JAQUAR ACN 1181S or equivalent in MARC/ Player

Supply & fix in repair chromium plated jet health fauset with 1.00m long easy flex tube in chrome finish & wall hook complete all as specified and directed. Make -JAQUAR ALD-BLK-585 or equivalent in MARC/ Player

Supply and fix in repair brass chromium plated toilet paper holder as per sample all as specified and directed. Make JAQUAR cat No ACN-1151N or equivalent in Player/MARC

Supply and fix in repair vitreous china counter top wash basin white fixed on counter including dismantling of existing RCC counter and providing new RCC couter 50mm thick and area not exc .50 Sqm incl necessary form work , 8mm TMT bars provided @150mm C/C, 12-15mm granite stone over screed bed 15mm th in CM 1:6 complete all as specified & directed : Make , CERA or equivalent in Hindware/Parryware

Material & labour 10mm thick rendering in CM 1:3 on concrete surfaces on ceiling finished even and smooth complete all as specified and directed.

Taking down cement plaster from brick walls or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description complete all as specified and directed.

Material & labour 15mm thick rendering in CM 1:6 on fair faces of brick wall or concrete surfaces finished even and smooth complete all as specified and directed.

Material and labour for preparation of newly wall plaster surfaces and applying two coats of cement base paint over a priming coat after finishing the wall surfaces with JK/Birla wall care putty to achive smooth finish complete all as specified and directed

Material and labour for preparation of newly plastered of walls and applying two coats of oil bound distemper over one coat of primer after finishing the wall surfaces with JK/Birla wall care putty to achive smooth finish complete all as specified and directed

Materials and labour for complete removal of existing treatment and finishing the surfaces of wall with Birla/JK wall putty and applying two coats of cement base paint of , any colour, complete all as specified and directed. complete all as specified and directed.

Materials and labour for complete removal of existing treatment from wall and preparing the surfaces of wall by applying a coat of wall care putty (Birla/J K wall care putty) and applying two coat of oil bound distemper of approved colour complete all as specified and directed.

Supply & fix in repair, CP stainless steel towel ring of size 200 mm dia and complete all as specified and directed. Make JAQUAR- AQN-7721 or equivalent MARC/Player

Cutting chases, pinning in making good to facing where required and pointing in CM 1:3 to ends for concealed water tubing and making good cutting n exc 10 cm girth in brick wall complete all as specified and directed.

Supply and fix MS work as in framed work for roof trusses, purlin, rafter, fastering distance pieces, cleats etc (including fixing independently vertical post) complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed

Material & labour for brick work with fly ash bricks built in CM 1:6 with sub class B, brick straight or curved on plan exceeding 6m mean radius complete all as specified and as directed.

All as per item No 32.00 above but half brick wall built in cement mortar 1:4 complete all as specified and directed.

Material and labour for 25mm PCC 1:2:4 type (using 20mm graded stone aggregated) as in flooring finished even & fair complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

Material & labour for 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Materials and labour for applying two coats of exterior emulslon paint (weather proof) over one coat of primer after preparing the surface of walls complete all as specified and directed.

Cutting openings, through brick walls built in CM for door window & other openings or enlarging existing openings or cutting out defective brick work under pinning, including providing fixing & removing shoring removing surplus serviceable bricks, hard core etc & rubbish n.exc 50 meter complete all as specified and directed.

Material and labour for aluminum anodized door shutter with frame including joining cleats and fixing accessories such as hinges handle and locking arrangements etc size of long rail stiles and bottom rail shall be 110x44.5 mm and top & centre rail shall be 85x44.5 mm thickness of aluminum section shall be 18 gauge with 15 micron anodizing top and bottom panel shall be provided with 4.8 mm thick plain sheet glass or 12mm thick Pre-laminated board approved shade best quality incl locking arrangement (with lock) and with hydraulic floor door closer complete all as specified and directed.

Supply & fix 25mm dia stainless steel curtain rod fancy type vista pattern of approved finish of superior quality including fancy type knobs at both ends, bracket for supports etc complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.5 Sqm but n.exc 4 sqm each and removing from site complete all as specified and directed.

All as per Item No. 41.00 above but area n.exc.1.5 Sqm each.

Supply and fix in repair 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches or laid under floors . complete all as specified and directed.

All as per item No 43.00 here-in-before but fixed to wall complete all as specified and directed.

Supply and fix in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and fix in repair 75mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed.

Supply and fix in repair 110mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed.

Supply & fix in repair 110 PVC (SWR) vent cowl complete all as specified and directed.

Supply and fix in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

Supply and fix in repair PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

Supply and fix in repair 100mm dia CP grating complete all as specified and directed.

Material and Labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as sub base of floor all as specified and directed.

Material and labour for 60 mm thick interlocking paver blocks coloured machine pressed rubber moulded (comprising of red & yelow in 1:1 ratio) interlocking pavers of approved design confirming to IS-15658-2006, M-35 grade set laid over 25 mm thick coarse sand and all as specified and directed.

Dismantling posts/struts (wood, steel or RCC) any section including taking out embedded portion from concrete/brick masonry etc and making good disturbed ground complete all as specified and directed .

Supply and fix mild steel work as in posts and strut in fencing including cutting tops to shape as directed drilling holes notching for wire etc complete all as specified and directed.

Supply only MS in flat ,round or square bars in available length confirming to Fe-410-W(Gde-E-250) complete all as specified & directed,

Supply and fix mild steel screw bolts (machine made) with hexogonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexogonal or square nut 5 to 10 mm dia and n. exc. 5 cm long complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified & directed.

Supply and fix pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall confirming to IS, fixed with self tapping screws as specified & as directed by Engr-in-Charge.

Demolition of cement concrete in ground floor and paving n.exc 15cm thick below or above ground level complete all as specified & directed.

Materila and labour for 100mm thick cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in flooring, surfaces finished even and smooth by using extra cement complete all as specified & directed.

Supply and fix glass dividing strips, 3mm thick 38mm width, inserted in position, confirm to design complete all as specified & directed.

Material & Labour for 20 to 22 mm thick designer tiles of Make: Ultra/Duracrete of design as approved by GE of any size and pattern laid and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tile complete all as specified and directed.

Material & labour for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in copings, kneelers, apex stones, bed plates, kerbs, inserting hold fasts, hooks, pintle hinges etc and like, finishing exposed concrete surfaces even and fair, complete all as specified & directed

Supply and fix Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Grade Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40mm graded aggregates as in foundation, filling and mass concrete.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50m wide and not exc 1.50m in depth for foundation etc or for shafts, wells, manholes etc not exceeding 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed.

Returning filling in including spreading levelling and well ramming in soft/loose soil complete all as specified

Removing excavated materials n exc 50 mtrs and deposited where directed at a level n exc 50 mtr where directed n exc 1.50 m above the starting point complete all as specified and directed

Material & labour approved soil filling under the floor, spreading and leveling in layers n. exc. 25cm thick well ramming including watering as required complete all as specified and directed. ( Note:- Soil obtained from exc item of BOQ herein before shall be used )

Material and labour for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

Material and labour for 40mm thick PCC concrete 1:2:4 type B-0 mixing with liquid water proofing admixture as per manufacturer's instructiions including necessary form work as in DPC complete all as specified and directed.

Material and labour for use & waste form work to soffits of suspended slabs (horizontal or sloping) such as roof slab, floor slab, landing and similar work not exceeding 200 mm thick for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for form work to edges of concrete flats, treads, break in floors, and similar work exc 10 cm but not exc 20 cm thick for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for use and waste formwork to sides & sofits of floor or roof beams, beam haunchings, girders, lintels, cantilevers, shelves including supports, overhangs, etc for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for Form work to chullah hoods, chajja, troughs and similar items including edges complete all as specified and directed.

Material and labour for providing reinforced cement concrete nominal mix 1:1½:3 type B-1 (using 20mm graded crushed stone agg) as in beams, cantilevers, lintels over 1.5m span complete all as specified and directed.

Material and labour for providing reinforced cement concrete nominal mix 1:1½:3 type B-1 (using 20mm graded crushed stone agg) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Materila and labour for reinforced cement concrete (Normal mix) type B1 1:1½:3 (20 mm graded crushed stone agg) for chajja etc complete all as specified.

Material & labour for TMT bars 10mm dia and over cut to length bent to shape required inculding cranking bending spirally hooping for columns hooking ends etc and binding with and including mild steel wire annealed less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 82.00 above but herein 6 to 8 mm dia as in strups and ruags etc.

Supply and fix vitreous china urinal, half stall type white, (excluding flushing cistern flush pipe and waste pipe) fixed in repairs incl all fittings.

Supply & fix plastic seat cover for water closet, white closed pattern with flat bottom & cover and aluminium anodised hinging device complete all as specified and directed. by Engineer-in-charge.

Supply & fix vitreous china wash down water closet pan (Pedestal pattern) white, with 'P' or 'S' trap including connection to trap, cistern and flush pipe excluding flushing cistern) complete all as specified and directed. by Engineer-in-charge.

Material and labour for 5 mm thick rendering on ceiling in cement mortar (1:3), surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering, 15 mm thick on fair faces of brick wall or concrete surfaces in cement mortar 1:4, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply and fix steel window or ventilator fixed type complete all as specified and directed

Supply and fix galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

Material and Labour for 75 mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection, surfaces finished even and fair complete all as specified and directed.

Material and labour for precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in cover slab, shelves etc set in cement mortar 1:4 complete all as specifed and directed

Supply and fix angular valve, 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fix bib tap, CP cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

Supply and fixing PVC connections of 450mm long suitable for 15mm dia iron pipe incl PTMT nuts complete alll as specified & directed.

Supply and fix pillar taps , cast copper alloy with capstan heads CP screwed down high pressure, with or without 'Hot or Cold' with long screwed shanks and fly nuts , screwed for iron pipe 15 mm bore complete all as specified and directed

Supply and fix of PVC low level flushing cistern 10 Ltr capacity white with inlet, ball valve, float and handle incl brackets and32 mm dia PVC flush pipe suitable for low level cistern complete all as specified and directed.

Supply and fix in vitreous china wash hand basin, white, flat back of size 550x400 mm (excluding taps, waste chain , plug and porcelain stopper) but including brackets complete all as specified and directed.

Supply & fix tubular towel rail of 20mm dia of brass, chromium plate, ’D’ type, 600 mm long between flanges complete all as specified & directed.

Supply and fix rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed.

Supply and fix 20 mm bore, PVC ball valves, high pressure with polyethylene float and fly nut, including epoxy coated aluminium rod, screwed for iron pipe or for brass ferrule complete all as specified and directed. ( Min Wt:- 210 Gms).

Supply and fix PVC floor/nahani trap with CP grating including jointing to waste pipe 100 mm dia fixed in cement concrete type B-1 (1:2:4) mix complete

Material & labour plain cement concrete bed to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) for 150 mm bore pipe complete all as specified and directed.

Material & labour for 150 mm bore salt glazed stoneware drain pipes laid in trenches and jointed in cement mortar (1:1) using hemp yarn socked in thick cement slurry all as specified and directed.

Material and labour for preparing of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

Supply & fix 20 mm bore gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified & directed.

Supply and fix 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches or laid under floors . complete all as specified and directed.

Supply and fix PVC (SWR) bend 110 mm dia complete all as specified and directed.

Material & labour for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

Material & labour for Factory made solid panel PVC wood grain printed door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togathers with solvent cement complete all as specified & directed.

Supply & fix butt hinges stainless steel 100mm with steel screws complete all as specified and directed.

Supply & fix 100mm long aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed

Supply and fixing MCB, SP, AC, 240 volts of 06 to 40 Amp C curve, 10 kA, confirms to IS/IEC 608981:2002 and making connections complete all as specified and directed. Make : Legrand/ABB/Schneider/Siemens.

Supply and fixing MCB, SP, AC, 240 volts of 40 to 63 Amp C curve, 10 kA, confirms to IS/IEC 608981:2002 and making connections complete all as specified and directed. Make : Legrand/ABB/Schneider/Siemens.

Taking down carefully any type of battens or conduit point wiring with batten / conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer- in-Charge.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in existing PVC / MS concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly for One tube light/Bulb/Bell/ point controlled by one, one way switch 05/06 Amps complete all as specified and directed.

All as per serial item No 118.00 here -in- before but with One ceilling fan/exhaust point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 118.00 here -in- before but with One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 118.00 here -in- before but with One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 118.00 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Supply and fix in repair modular switches 1 way 6A, 1 module single pole (as per sample), 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair modular socket outlet, 6A-2/3 pin combined 2 module, 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair modular switches 1 way 16A, 1 module single pole (as per sample), 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair modular socket outlet, 6A/16A-2/3 pin combined 2 module (as per sample), 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fix modular white cover plate with frame 1 module complete all as specified and directed by Engr-in-Charge.

Supply and fix modular white cover plate with frame 3 module complete all as specified and directed by Engr-in-Charge .

Supply and fix modular white cover plate with frame 4 module complete all as specified and directed by Engr-in-Charge .

Supply and fix modular white cover plate with frame 12 module complete all as specified and directed by Engr-in-Charge.

Supply and fix modular metal fllush box 1 module complete all as specified and directed by Engr-in-Charge .

Supply and fix modular metal fllush box 3 module complete all as specified and directed by Engr-in-Charge .

Supply and fix modular metal fllush box 4 module complete all as specified and directed by Engr-in-Charge .

Supply and fix modular metal fllush box 12 module complete all as specified and directed by Engr-in-Charge .

Supply and fix in repair lamp holder (Angular/Straight), insulated body, with back plate for batten fitting all as specified and directed by Engineer-in-Charge.

Supply and fixing LED lamp 9 watt of make:- Havells/Crompton /Bajaj/Wipro

Supply and fix LED CRCA batten complete with retrofit T-8 polycarbonate tube Tara-E series light fitting 1x20 watt including driver high transculent frosted diffuser, bipin holders, connector block etc complete with all accessories internally prewired and including connecting up with twing core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Havells/Compton/Bajaj/Wipro

Supply and fixing in repair LED panel recess/surface/suspended mounting 36W Ultra modern designed architectural 2x2 LED luminaire 36/40W which provides soft light and glare free symmetrical illumination including all accessories for fixing in false ceiling/ceiling/in hanging position all as specified and directed by Engineer-in-Cahrge. Make - Crompton/Surya/Bajaj/Wipro

Supply and fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

Supply and fix wallmounting fan single phase oscillating type 400 mm sweep 230 volts complete including taking donw and deposited to AGE E/M yard all as specified and directed. Make : Havells/Compton/Bajaj/Usha

Supply and fixing exhaust fan 450 mm sweep non metalic body with louver, 240 volts AC single phase, 50 Hz, 1400 RPM, ISI marked, including making connection, cable, and other fixing material complete all as specified and directed by Engr-in-Charge, make Crompton/Khaitan/Havells/Usha

Supply and fixing exhaust fan 300mm sweep non metalic body with louver, 240 volts AC single phase, 50 Hz, 1400 RPM, ISI marked, including making connection, cable, and other fixing material complete all as specified and directed by Engr-in-Charge, make Crompton/Khetan/Havells/Usha

Supply and fix switch piano flush type, 05/06 Amp single pole, one way 240 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fix socket outlet 3 pin, 05/06 Amp and 3 pin 15/16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed by Engineer-in-Charge.

Material and labour for air fan PVC body 250mm sweep louvers duly mounted fixed prperly including necessay work for opening round hole in wall for fixing of fresh air fan in side and louver out side making connection, including cable, nut bolt and other fixing material complete all as specified and directed. Make : Havells/Khaitan/Crompton/Usha

Supplying, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 10 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer-in-Charge Make : Legrand/ABB/Schneider/Siemens.

m/s gupta construction

Jay Ambay Enterprises

vibha associates

Punit Jain

M/s D.K.Enterprises

R.D.Builders

M/S AGARWAL CONSTRUCTION CO.