Supply, Installation and Commissioning and Testing of Raisin Washing Set up 4 TPH

Vibrator Feeder with hopper,conver • Approximate size of hopper is 1000 x 1000 x 800mm made out of 2mm thick sheet • MOC: Vibro motor mounting bracket in Carbon steel, Motors & Oscillating mounts in CI standard material & Other all in ms • Vibrator size 2000 x 800 x 1220mm height from ground One Slotted sieve provide to remove Small stems • Italvibras / Oli make/Equivalent vibrating motors 5KN each 01 • Oscillating mounts for isolation of vibrating body from ground • make Rosta/DPH • Installed power approx. 1Hp • ms cinver width 600mm× height 3000 mm • CAPACITY-250 TO 260 CRATES (16 Kgs)per hour

Washing Srew / Elevator Feed to De-stemming machine • Overall dimensions: 3200mm length approx., 600 mm width and 3000mm height from ground 4 ΤΡΗ • MOC: Geared motor in CI & Other all in SS or ms • Belt food grade side walled PU belt, Clits height 70mm to 75mm at the pitch of 300mm • Belt supported on bed made in 2.5mm thick • sheet Structure made in 80x40 and 40x40 sq. tubes • Feed hopper and discharge chute • Installed power 1HP. • Geared motor SEW/Nord/DPH make/Equivalent 1HP, 45 RPM • SS304 Washing Screw With Ms Structure

Dual Feeder Pump/mud pump • Semi SS304 Dual Feeder • With Recirculation, Pump, filters, & set of Piping • It consists of: Raisins Destoner (Cascade) • MOC: Geared motor & Pump in CI & Other all in SS or ms • Size: 3000mm length 900mm width and 2950mm height Inclination angla 25 to 30 Deg. • From the ground Mounted on SS304 or ms rectangular structure • Stone trap with ms angle& Pipe • Provision for removing of stone in bottorn collection • ISI Mark Mud pump And Pipping Walve

Water Filtration and Recirculation Unit & Mini vibrator, Dual Spining • MOC: Vibro motor mounting bracket in Carbon steel, Motors & Oscillating mounts in CI standard material & Other all in ms or ss. Water tank capacity 600 Litres • U shaped wedge wire screen of width 800mm mounted on tank • Water from destoner will be filtered and collect in this tank • Recirculation pump with dual cartridge filter in suction of around 50 CUM/Hr capacity mono block type. • Vibrator size 2500 L x 1000 W x 1220mm height from ground Italvibras / Oll make vibrating motors 6KN each 02 No's • Oscillating mounts for isolation of vibrating body from ground make Rosta& inside net • Installed power approx. 20HP Ma. Spinner Semi SS304 Dual Spining Machine

Control Panel/ Pannel Bord • MS powder coated cabinet, • VFD for pump • starters for all other motors. • Panel is Mounted on skid and machine is delivered with • wiring at factory • ISI Marking Pannel Box

Installation and Commissioning Charges