Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.0 LAccepted-AOC 15 281 CHHILI INT ROAD GHATIYA AZAM KHAN AGRA UTTAR PRADESH 282003 | AGRA | UTTAR PRADESH | 282003 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹30.0 L+₹20,015 (0.67%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹30.0 L+₹20,352.50 (0.68%)Rejected-Finance NO 943 0 56 VILL PO PATHRERI TEH KOTPUTLI DIST JAIPUR RAJASTHAN 303 107 | JAIPUR | RAJASTHAN | 303107 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹37.6 L+₹7.8 L (26.3%)Rejected-Finance | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹37.7 L+₹8.0 L (26.7%)Rejected-Finance B BLOCK 2 3 RAM BACHAN V B NAGAR PIPE ROAD KURLA W MUMBAI 400070 | MUMBAI SUBURBAN | MAHARASHTRA | 400070 | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹1.0 L
Closing Date
15 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIR MAINT AND CONNECTED WORK IN HERITAGE BLDGS AT INS ANGRE AND ASSOCIATED AREA UNDER GE NW KUNJALI COLABA MUMBAI
2023_MES_633506_1
8587/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Kunjali
Class C category a(i)
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Kunjali
₹1.0 L
Yes
13 Mar 2024
19 Dec 2023
17 Jan 2024
19 Dec 2023
15 Jan 2024
9 Jan 2024
19 Dec 2023 - 2 Jan 2024
Amount
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MoD land complete all as specified and directed by the Engr-in- Charge. Note: The place of disposal shall be find out by the contractor.
Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MoD land complete all as specified and directed by the Engr-in- Charge Note: The place of disposal shall be find out by the contractor.
Material & labour for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by the Engr-in- Charge
Material and labour for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall in cement mortar (1:4) complete all as specified and directed by the Engr-in- Charge
Material & labour for Firebrick work to fire places, flues, etc. (other than in chimney shafts), set, jointed and pointed in fireclay complete all as specified and as directed Engr-in-charge.
Material & labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even & smooth without using extra cement complete all as specified and directed by the Engr-in- Charge
Material & labour for rendering 10mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement complete all as specified and as directed Engr-in-charge.
Material & labour for rendering 20mm thick in two coats(15mm inner coat 5mm finishingcoat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound on finishing coat in the proportion as per manufacturer's instructions including necessary scaffolding for high rise bldgs and safety arrangement complete all as specified and as directed Engr-in-charge. Note - Water proofing compound shall be measured and paid for separately.
Supply only integral water proofing compound complete all as specified and directed by the Engr-in- Charge
Material & labour for applying 3 mm thick wall care putty for making the surface even & smooth complete all as specified and as directed Engr-in-charge.
Material and labour for preparing new plastered/ putty surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed by the Engr-in- Charge
Material & labour for preparation of newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed by the Engr-in- Charge
Material & labour for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weeather acrylic base paint (100 % acrylic) over one coat of self primer including necessary scaffolding and safety arrangement for high rise bldgs etc complete all as specified and as directed Engr-in-charge.
M&L for preparing old painted surfaces of wall by complete removal of existing treatment by scrapping, washing & rubbing down with water and applying two coats of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and directed by the Engr-in- Charge
Material & labour for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed Engr-in-charge.
Material & labour for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and as directed Engr-in-charge.
Material & labour for preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) including necessary scaffolding and safety arrangement for high rise bldgs etc complete all as specified and as directed Engr-in-charge.
Material and labour for preparing old painted surfaces of wall by complete removal of existing treatment by scrapping, washing & rubbing down with water and applying two coats of plastic emulsion paint over a coat of primer complete all as specified.
Material & labour for preparation of old decorated surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and as directed Engr-in-charge.
Supply & fixing in repairs 8 mm to 10 mm thick wooden flooring and skirting including spung/polythene complete all as specified and as directed Engr-in-charge. Make - hego/pergo or equivalent as mentioned in Appendix B to PS.
Taking down chowkats with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified and directed by the Engr-in- Charge
Taking down chowkat with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed by the Engr-in- Charge
Taking down shutter of any description area exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed by the Engr-in- Charge
Taking down shutter of any description area n.exc 1 Sqm each complete all as specified and directed by the Engr-in- Charge
Material and labour for second class hardwood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by the Engr-in- Charge
Material and labour for 35 mm thick second class hard wood plain, framed factory made panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I),kiln seasoned and chemically pressure treated complete all as specified and directed by the Engr-in- Charge
Supply & fixing 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and directed by the Engr-in- Charge
Material and labour for 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkats complete all as specified and directed by the Engr-in- Charge
Supply and fixing powder coated aluminium sections (minimum 25 micron thickness of coating) for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, cleats etc including all accessories such as glazing clips and rubber beadings for fixing glass panes/ wire mesh in frame including filling the gap with sealing compound complete all as specified and directed by the Engr-in- Charge Note: - (i) Glass panes/ wire cloth will be measured & paid separately. (ii) Rubber beading will not be weighed and paid separately
Supply & fixing in repairs aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 102, 7.5 mm thick complete all as specified and as directed Engr-in-charge.
Supply & fixing 4.8 mm thick sheet glass ordinary quality and glazing in squares fixed in rubber beading complete all as specified and as directed Engr-in-charge.
Supply & fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc.complete all as specified.
Supply & fixing in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc, complete all as specified and directed by the Engr-in- Charge
Supply & fixing 12mm thick prelaminated medium density particle board,interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and as directed Engr-in-charge.
Supply & fixing 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed Engr-in-charge.
Supply and fixing aluminium anodised barrel tower bolts of extruded section, 200 mm length, ISI marked complete all as specified and directed by the Engr-in- Charge
Supply and fixing aluminium anodised barrel tower bolts of extruded section, 150 mm length, ISI marked complete all as specified and directed by the Engr-in- Charge
Supply & fixing 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed Engr-in-charge.
Supply and fixing 100 mm long stainless steel butt hinges with stainless steel hinge pin, bright finished complete all as specified and directed by the Engr-in- Charge
Supply and fixing 75 mm long stainless steel butt hinges with stainless steel hinge pin, bright finished complete all as specified and directed by the Engr-in- Charge
Supply and fixing MS work as in holdfast and similar articles conforming to grade Fe 410-0 and Fe 310-0 complete all as specified and directed by the Engr-in- Charge
Supply & fixing in repairs 140 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed Engr-in-charge.
Supply & fixing Aluminium extruded body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters upto 700 mm in width and of weight not more than 35 kg and fixed complete all as specified
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed Engr-in-charge.
Supply & fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walk ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified and as directed Engr-in-charge.
Supply & fixing steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS -1161 1979 grade St-240 complete all as specified and as directed Engr-in-charge.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land.
Material & labour for 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed Engr-in-charge.
Rounding to edges of stone slabs fixed in steps, cooking platform and making grooves for lining and other similar work complete all as specified and as directed Engr-in-charge.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing debris out side MoD land. Note: The place of disposal shall be find out by the contractor.
Material & labour for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and rendering 15 mm thick plaster in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions and finished even and smooth without using extra cement complete all as specified and as directed Engr-in-charge. Note - WPC shall be measured and paid separately.
Material & labour for PCC 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) as a leveling course on roof surfaces and coping including necessary formwork complete all as specified and directed by the Engr-in- Charge
Material and labour for preparing roof surface with water and finally remove dirt and applying water proofing treatment as per manufacturers instructions and comprises of the following activities:- (a) Applying one coat of bituminous primer @ 0.25 Kg per Sqm. (b) Applying evenly a coat of bitumen 85/25 at the rate of 1.2 kg per sqm (c) Providing and laying five layered 4 mm thick APP (Atatic poly propylele) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm. The APP membrane shall be laid using torch application method with minimum 100 mm side overlap and 150 mm end overlap.The APP membrane shall be taken upto minimum 200 mm on vertial surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet. Note - (i) Irrespective of lap the net covered area shall only be measured and paid. ii) The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane.
Material & labour for Machine pressed cement concrete tiles of size 250mm x250mm x 22mm thick mixed with grey cement and pigment laid over and including 20mm thick screed bed in CM 1:4 set and jointed and pointed in neat cement slurry complete all as specified and as directed Engr-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the primesed completed all as specifed and directed
Dismantling plain or corrugated steel any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed Engr-in-charge.
Supply & fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and as directed Engr-in-charge.
Supply & fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and as directed Engr-in-charge.
Material & labour for PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate ) as in plinth protection and similar works 75mm thick finished even and fair without using extra cement complete all as specified and as directed Engr-in-charge.
Material and labour for French polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler with two or more coats complete all as specified and directed by the Engr-in- Charge
Material & labour for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint including necessary scaffolding and safety measures in high rise bldgs complete all as specified and as directed Engr-in-charge.
Material & labour for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed Engr-in-charge.
Material & labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed Engr-in-charge.
Material & labour for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint on external window with necessary scaffolding and safety measures in high rise bldgs complete all as specified and as directed Engr-in-charge.
Removing of bldg materials exc 5 KM but not exc15.00 KM and depositing where directed complete all as specified and directed by the Engr-in- Charge Note: The place of disposal shall be find out by the contractor.
Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified and as directed Engr-in-charge.
Supply & fixing 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and as directed Engr-in-charge.
Dismantling single layer mangalore pattern or similar tiles in roofing laid dry complete all as specified and directed by the Engr-in- Charge
Dismantling single layer mangalore pattern or similar tiles in roofing bedded in cement mortar complete all as specified and directed by the Engr-in- Charge
Dismantling battens for tiles, shingles etc, of any size including tilting fillets spaced exc. 15 cm complete all as specified and directed by the Engr-in- Charge
Dismantling of unframed timber scantling 40sqcm and over in section in any position complete all as specified and as directed Engr-in-charge.
Dismantling of unframed timber scantling under 40sqcm in section in any position complete all as specified and as directed Engr-in-charge.
Dismantling boarding of any description, fixed in any postion with nails complete all as specified and directed by the Engr-in- Charge
Material & labour for second class hard wood timber scantling clean sawn in unframed work complete all as specified and as directed Engr-in-charge.
Ditto- as per item No 78 above but except timber complete all as specified and directed by the Engr-in- Charge
Supply & fixing 2nd class HW plain fillets clean sawn square, rectangular or triangular in section, sectional area exc 13 swqcm but n.exc 25 sqcm fixed with nails complete all as specified and as directed Engr-in-charge.
Material & labour for 2nd class HW battens for tiles clean sawn sectional area exc 15 sqcm and n.exc 25 sqcm and spacing of 30 cm centres complete all as specified and as directed Engr-in-charge.
Material & labour for roof tiles, Mangalore pattern , interlocking at side joints laid dry complete all as specified and as directed Engr-in-charge.
Material & labour for ridge tiles mangalore pattern bedded and jointed in cement mortar 1:6 complete all as specified and as directed Engr-in-charge.
Material & labour for preparing the surfaces of tiles battens new or old of any size and spacing and applying two coats of creosote oil complete all as specified and as directed Engr-in-charge. (measured over all one side only, spaces not deducted).
Material & labour for 2nd class HW boarding 25 mm thick planed one side with butt joints and fixed with nails in any position complete all as specified and as directed Engr-in-charge.
Material & labour for chipping, removing carefully concrete work by low impact hammer breakar without damaging the structure ( hard concrete should not be removed by force) including cleaning, necessary scafolding and safety measures in high rise bldgs and disposal of debries out side MD land complete all as specified and as directed Engr-in-charge.
Material & labour for dismantling of rusted steel , clean existing reinforcement with wire/rotary wire brush, making the surfaces free from loose material dirt,loose rust spalls and applying two coats of alkaline rust converting primer FEOVERT conforming to ASTM-B-117, on the rebars with time interval of 6 hour between the coats and applying protective coating IPNET-RB complete all as per manufacturers instructions and as directed by Engr-in-charge..
Material & labour for welding of steel reinforcement with TMT bars of appropriate size where 20% of cross section is reduced including application of rust converter FEOVERT and applying protective coating IPNET-RB to new reinforcement complete all as per manufacturers instructions and as directed by Engr-in-charge.
Material & labour for carry out application of Bi-polar migratory corrosion inhibitor EPCO-KP-100/Protectsil CIT/Ferogard 903 on concrete surface (This inhibitor shall have migratory kind of property which permits the material to migrate to a vertual extent of 100 mm through porus of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It should have property to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5) so it has not carcinogen activity with concrete complete all as per manufacturers instructions and as directed by Engr-in-charge..
Material & labour for providing and applying structural grade EPIBOND-21-LP prior to application rendering/ plaster confirming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete complete all as per manufacturers instructions and as directed by Engr-in-charge.
Material & labour for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond -5Cemen t-15 sand) -in damaged areas in 30mm thickness including leveling profliling including necessary scaffolding and safety measures for high rise buildings complete all as per manufacturers instructions and as directed by Engr-in-charge.
Material & labour for Providing and applying jacketing around columns/RCC members with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor complete all as per manufacturers instructions and as directed by Engr-in-charge. Note: i) Reinforcement shall be measured and paid separately. ii) Rates quoted are deemed to include jacketing, formwork and micro concrete.
Material & labour for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes in structural members at the intervals of 500 mm center to center in staggered manner or as directed by Engr-in-charge and work shall be carried out as under :- (i) Cleaning of holes by air blower prior to fixing nozzles. (ii) Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun.Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cut the nozzles by chisel after completion of grouting without damaging structural elements.
Material & labour for Injecting cement slurry grout, in the ratio 1:2 (1- Cement, 2-water) including super plsticizer (Supercom-100) 250 ml/50 Kgs. Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 0.5 Kg/cm2 complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled (for repair to wall & slab) complete all as specified and directed by the Engr-in- Charge
Material & labour for Injecting low viscosity MONOPOL (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including,Mixing of materials:Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching.Grouting maintain the pressure at exit (0.5 to 1.0 kg/cm2) by monitoring pressure guage at exit.Grout the material through prefixed nozzles in the structural elements @ 100ml per nozzle. Repeat the process for all the nozzles (Beam and columns) complete all as specified and directed by the Engr-in- Charge
Supply & fixing out door green realistic high density artificial synthetic grass, non-Toxic Turf mat 35mm thick complete all as specified and as directed Engr-in-charge.
Supply & fixing 3 seater FRP garden park bench 5Lx2W feet with suitable cast iron designed legs with arms complete all as specified and as directed Engr-in-charge.
Supply and fixing in repairs 304 grade stainless steel railing made of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waiste slab with suitable arrangement complete all as specified and as directed Engr-in-charge.
MADHU ENTERPRIZES
VIPUL CONSTRUCTION COMPANY
Satyanarayan Trading Co.
Genius Construction Co.
Sachin santosh dalvi
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .