Request for Proposal for Services of an Organization Specializing in STEM Integrated Robotics Labs

ELECTRONICS DEVELOPMENT, SENSORS & ROBOTICS

Arduino UNO (ATmega328p 8-bit AVR family)

Arduino NANO (ATmega328p 8-bit AVR family)

Node MCU (ESP 8266)

Breadboard (Solderless 400 pin breadboard)

Breadboard (Solderless 800 pin breadboard)

16 X 2 LCD Display (DOT matrix LCD Display, 16 characters X 2 Lines. I2C)

USB Cables (Type - A to B)

USB Cables (Type - Mini for Nano)

Battery (9 - 12 V rechargeable, 2000 to 2500mAh with chargers)

Resistor Kit (One kit contains - 30 carbon film resistors of 20 different resistance values each. Values:( 0, 1.5, 4.7, 10, 47, 100, 220, 330, 470, 680Ohms), KiloOhms(1, 2.2, 47, 100, 330), 1Megaohm)

Capacitor Kit (One kit contains - 20 electrolytic capacitors of 10 different capacitance values each. Value Picofarad (10, 22 , 100), Nanofarad (1, 10, 100), Microfarad(1, 10, 100, 1000))

Linear Voltage Regulator (7805, 7812, 7809)

Water Pump Module (DC 12 V 3W submersible Water Pump)

8*8 LED Matrix Module (Max7219 Dot LED Matrix Module, MCU control LED Display Module)

Bluetooth Module (HC – 05)

7 Segment LED Display (LED 4 Digit Display Module, 4 pin interface)

GSM (SIM 900 GPRS transfer board, Micro SIM GSM core TTL Port Module for Arduino)

GPS (GY - NEO6MV2 new GPS module)

Laser Diode Emitter Module (650 nm 5mW Mini Dot Laser Module)

LDR Module (5mm/12mm, Photosensitive LDR Light Sensor Module)

KeyPad (4*4 Keypad)

Joystick (2 - axis joystick with push button function)

Buzzer (Small 5 Volt)

Buzzer (Big 5 Volt)

Motor Driver Module (L293D)

Motor Driver Module (L298D)

Sound Playback Module (ISD 1820 voice recording module)

Vibration Motor (Weight: 10 Grams, Operating Voltage: 1.5 to 3V)

Battery Clips with DC Jack (9 Volt Battery clip with DC Jack)

DC Plastic Gear Motor with wheel (12V, 150 rpm, side shaft BO Motor)

Hook up wires/Single Strand Wires (Red & Black Set 100 Metres each)

Jumper Cables (Male to Male)

Jumper Cables (Male to Female)

Jumper Cables (Female to Female)

LED's (RGB LED(5mm regular 3 - 5 volt Range))

LED's (Red LED(5mm regular 3 - 5 volt Range))

LED's (Green LED(5mm regular 3 - 5 volt Range))

LED's (Blue LED(5mm regular 3 - 5 volt Range))

LED's (Yellow LED(5mm regular 3 - 5 volt Range))

LED's (White LED(5mm regular 3 - 5 volt Range))

Timer IC - LM555 (LM 555 Timer IC)

Diodes and Transistor Kit (1. Basic Kit of 25 assorted basic diodes)

Diodes and Transistor Kit (2 Type NPN Transistor - 2N3904, BC547 PNP Transistor- 2N3906, BC557 Silicon Diode - 1N 4148)

Capacitive Touch Switch Module (Digital Capacitive touch switch - TTP223B)

IR Sensors (LM393 Distance Detection 2 - 30 cm)

MQ Series (MQ - 2 Smoke Detection)

MQ Series (MQ - 3 Alcohol Sensor)

MQ Series (MQ - 4 Methane Natural Gas Sensor)

MQ Series (MQ - 5 Methane Liquified Gas Sensor)

MQ Series (MQ - 6 LPG Sensor)

MQ Series (MQ - 7 High Sensitivity CO Sensor)

MQ Series (MQ - 8 Hydrogen Gas Sensor)

MQ Series (MQ - 135 Air quality Sensor)

Ultrasonic Module (HC - SR - 04)

Triple Axis Accelerometer (3 - axis sensing)

PIR Motion Detector Module (High digital pulse when motion detected)

Pulse Rate Heart Sensor (Pulse rate sensor finger based)

Relay Module (1 Channel)

Relay Module (2 Channel)

Soil Moisture Sensor (FC - 28 with LM293 comparator)

Rain Drop Sensor (Rain Sensitive, Rain drop detection sensor module)

Touch Sensor (Capacitive Touch Sensor Module, TTP22X series, Voltage Range: 3.3 V)

Temperature and Humidity Sensor (DHT11)

Color Recognition Sensor (TCS3200 Color Recognition Sensor)

Sound Sensor (Sound Sensor Module, Microphones Module)

Flame Sensor (Flame Sensor Module)

Power Bank (10000 mAh 5 - Volt Power Bank)

RFID Tags (Read range between 20cm to 1 m)

DC Motor with wheels (12V DC Gear 150 RPM)

Servo Motor (Position servo angle based metal gear)

Servo Motor (Small servo metal gear)

Servo Motor (Continuous metal gear servo 360)

Servo Motor (Small servo plastic gear)

150 RPM BO Motor (150 RPM BO Motor)

Bio - Medical Kit (Comprehensive Robotics/IoT Kit)

Agri - Tech Kit (Should include drip irrigation projects for 10 plants.)

RAPID PROTOTYPING TOOLS

3D Printer (FDM Based 160mm X 160mm X 160mm)

UPS (Dedicated UPS/power back up for 2 hours)

Filament (Compatible filament that can be inserted inside the printer(3 colors, 1 each))

Set of arts & crafts Accessories (Cardboard)

Set of arts & crafts Accessories (Foam Core Boards)

Set of arts & crafts Accessories (Rubber Bands)

Set of arts & crafts Accessories (Popsicle Sticks)

Set of arts & crafts Accessories (Wood Glue - 500 ml)

TOOLS

Hacksaw Frame (12 inches)

Hacksaw Blades (12 inches)

Mini Hacksaw Frame (6 inches)

Mini Hacksaw Blades (6 inches)

Pliers - 4.5 inch Size (External Straight)

Pliers - 4.5 inch Size (Nose Clip Plier)

Pliers - 4.5 inch Size (Long Nose Plier)

Pliers - 4.5 inch Size (Combination Mini Plier)

Pliers - 4.5 inch Size (Wire Stripping Plier)

Pliers - 4.5 inch Size (Needle Nose Plier)

Pliers - 4.5 inch Size (Bent Nose Plier)

Tweezer Set (6 Pc. Non Magnetic, size 6 inches)

Ball Pen Hammer (weight - 0.75 kg)

Steel Shaft Claw Hammer (weight - 0.75 kg)

Allen Key Set (10 Piece ring Imperial)

Spanner Set (12 piece combination spanner set)

Precision Screw Driver Set (6 Piece Precision Screw Driver Set)

Wire Strippers (Wire stripper with spring)

Screw Driver (40 pc Multi - Purpose screwdriver set)

Flexible Cutting Mat (A3 size with marked grids)

Plastic storage drawer/organiser (Number of drawers 60 or equivalent)

Peg board (Pegboard system to mount tools)

Hot Glue gun (Work with standard glue stick 0.5 inch)

Soldering Kit (Soldering iron)

Soldering Kit (De soldering pump)

Soldering Kit (Soldering Wire with flux 100 grams)

Soldering Helping Hand (Adjustable crocodile holding clamps, soldering iron holder, LED light, magnifying lens)

Measuring Tape (Return measuring tape 5M X 19mm)

Digital Vernier Calliper (150mm/6")

Digital Multimeter (Digital Multimeter)

Adapters (DC power Adapter with 5V, 2A)

Adapters (DC power Adapter with 12V, 2A)

Spirit Level (12" Spirit Level)

DIY Paper Microscope (DIY Paper Microscope, magnification range - 100x to 2000x)

Telescope (All glass optical components)

POWER SUPPLY

Glue Sticks (11mm X 200 mm Hot melt Glue Stick)

Cable Tie (Small Cable Tie - Pack of 30)

Cable Tie (Medium Cable Tie - Pack of 30)

Sand Paper (Grit Values - 80, 100, 120, 200, 300 - 2 Nos of each)

Power Strip Adaptors (Power Extension, 5 or more sockets in each extension with wire length of 5 metres or more and a fuse)

Bulb Holder (Regular Hanging Bulb Holder)

Electric Wires (Twisted Red and Black pair In Metres)

First Aid Kit (Standard Apollo Kit)

Safety Goggles (Safety Goggles)

Safety Gloves Pairs (Latex coating gloves pairs)

Safety Mask ()

Fire Extinguisher ()

USB to DC jack Cable (USB to DC jack cable for Battery Bank)

ADDITIONAL KITS

Drone (The kit shall contain a classic quadcopter and the speed which suits from beginners to experts. It shall be equipped with gyro sensors for more stability in flight with 32 bit controller following 802.11 protocol. LiPO with inbuilt charger 600mAh, 3.7 volts)

Electronic DIY Kit (DIY Robotics, Electronics & Automation Projects, Sensor Base, Power Block, Light Sensor, Sound Sensor, Obstacle Sensor, Not Gate, Dimmer, Copy Block)

Robotic Arm (3 DOF programmable robotic arm. Have compatibility with scratch and python coding, servos with angle feedback, Inverse kinematics algorithm analysis, voltage and temperature feedback.)

DIY Robotic Kit & IoT (This kit is reprogrammable& offers opportunity to explore the world of IoT and cloud computing and different network protocols. The controller should be having 32-bit word length with capability of network communication with in built 802.11 b/g/n. The kit also includes Chassis and mechanical links, motor, wheel, microcontroller, connecting wires, motor driver, IR sensor, Bluetooth, ultrasonic sensor, battery with charging circuit, connectors, screw driver.)

STEM KIT (STEM kit for learning by doing. Using the kit students should be able to create 10+ different configurations of robots: Chasis , axles, connectors , washable makers , electric motors with wire, AA battery pack, spring, bolts and nuts, L - brackets , wheels, bushings, safty glasses, screw driver, challenge cards.)