Re-location and beautification of Dr. Bhabha bust in lounge area, ground floor and background artistic painting in lift lobbies of 1st 2nd and 3rd floor, Anushaktibhavan, Mumbai under OYC maintenance unit

Amount

GENERAL ABSTRACT

PART - I - CIVIL WORKS

Description of Work / Item(s)

Amount

PART - I - CIVIL WORKS

Half brick masonry using well burnt locally available bricks of approved quality in cement mortar 1:4 at all floors and levels including RCC 1:2:4, 115mm wide & 80mm thick stiffeners at every one metre height with 2 Nos. of 6 mm dia M.S. rods including form work, scaffolding, raking out joints, curing, etc. complete all as per specifications & as directed by the Engineer-in-Charge.

a) In partition walls without stiffeners.

Supplying, fabricating and fixing in position at all floors factory made aluminium sliding / top hung / fixed / adjustable louvered / window / ventilator / partition with rebate joints of specified size made of integrated bronzed anodised matt finished ( 15 Micron thick) aluminium section (extruded) including for making exhaust fan frame work, handle of specified size, pivot floor hung in aluminium door, etc of approved manufacturers for following types with extruded sections of Jindol / Indol / Alumina or other approved equivalent make of approved sections with size and weights as directed for partition / frames / setters including wastage if any, confirming to latest IS Specifications with all approved bronzed anodised aluminium fittings and accessories, latching fixture 2/3 rollers with ball bearing of superior quality including providing and fixing aluminium channel beading / glazing clips fixed with necessary bronzed anodised screws, grouting the gaps with sealant and including dismantling existing window / partition / wooden door parathion / glass partition etc and depositing the same to deptt. Store at AnushaktiNagar etc all completed as per specification and all directed by the EIC.

Providing and fixing wall panelling at all floors & locations consisting of following thick waterproof marine ply wood Anchor make conforming to IS 710 latest revision & with 3 mm thick teak wood veneer fixed on aluminium frame work on walls including suitable steel screws of required size and providing 3 mm wide grooves between veneer panels of different shades ( dark and light colour ) including applying 3 coats of melamine polish after preparing the surfaces, scaffolding, tools, screws, rawal plug etc. including making cut-out for electrical fitting & fixture with shutters, handle, hinges etc. complete all as per existing pattern and design, specification and as directed by the Engineer-In-Charge.

a) 12 mm thick marine ply.

b) 19 mm thick marine Ply

C) 25 mm thick marin ply

d) 6 mm thick veneer

Providing and fixing 6 mm thick Acrylic Solid base CORIAN Material for panelling at all floors & locations including suitable adhesive / steel screws of required size including applying finishing with line & level after preparing the surfaces, scaffolding, tools, screws, rawal plug etc. including making cut-out for electrical fitting & fixture with shutters, handle, hinges etc. complete all as per manufactures specification and drawing and as directed by the Engineer-In-Charge.

Providing and fixing 1.5 mm thick signal side pre laminated sheet of approved make & colour for partition in existing frame work including all material cutting, fixing the same in line and level etc. complete all as per specification and directed by the Engineer-In-Charge.

Providing and fixing 4 mm thick Aluminium composite ply of approved make & colour for partition in existing frame work including all material cutting, fixing the same in line and level etc. complete all as per specification and directed by the Engineer-In-Charge.

Applying three coats of melamine finished polishing on old wooden surface cladding & cabinet with approved tint & make to obtain required finish over a coat of wood filler including spray gun, sand papering, cleaning, filling up holes, cracks & crevices with putty etc. tools and plant. to give an even shade etc. complete all as directed by the Engineer-In-Charge.

Providing and fixing of BTC decorative moulding of various size cut to desired shape to the wall / panel Around as per existing design and patterned and including fixing with necessary screw, panel / pin at all height, etc. all as per directed by the Engineer-In-Charge.

a) Decorative moulding of size 125 mm X 125 mm, 100 mm X 100 mm and 75mm X 75mm

Providing and fixing of heavy floor type door closer / floor hinges of Rolex brand or other approved equivalent to the existing door shutter / newly door shutters including removing the shutters carefully and cutting the niche at floor / top one corner to accommodate door closer with all fittings, screws, tools, labour etc complete all as directed by the Engineer-In-Charge.

Providing and fixing 12 mm thick of toughened glass of M/s Triveni / shree vallabh / IAG / Modi guard saint gobin or approved equivalent manufacture and back painted with DAE logo as approved design and patterned and fixing with aluminium frame work up to 4.00 M height(door / window / Partition/ including fixing aluminium channel beading and providing and fixing 2 way EDPM casketing to ensure water and air tightness and neoprene cushions / gasket accommodated in grooves, necessary bronze anodised screws etc. all complete generally as per drawings specifications and as directed by Engineer in charge.

Providing and applying cement base wall care grey putty of wall plast in in two coat of grey cement based putty of M/s ROOFIT or other approved equivalent make over entire surface finished smooth including preparing damaged surface filling up the cracks, crevices even and smooth dusting, cleaning scaffolding, covering etc complete all as per specification and as directed by the Engineer-In-Charge.

Repainting of old painted surfaces with two coats of acrylic emulsion paint of approved make & shade over two coats of approved primer (alkali resistant) consist of thoroughly scrapping oil bound distemper /acrylic emulsion / white wash surface, applying a coat of approved cement primer, filling up the cracks with approved crack filling compound , applying approved stucco putty to entire surface to fill up crevices, middle pression etc. thoroughly scrapping the surface, applying 2nd coat of approved cement primer carrying out full stucco putty work, apply two coats of acrylic emulsion paint including necessary covering material and removal of splashing & droppings from floors, walls including scaffolding, ladder as required & disposing of debris outside colony etc. complete all as directed by the Engineer-in-Charge.

Re-painting with spray painting of old painted wooden/steel surfaces of metallic false ceiling with two coats of synthetic enamel paint using first quality synthetic enamel paint of approved make and shade over one coat of approved wood/steel primer / red oxide including removing the existing false ceiling and reaffixing the same in line & level including preparing surfaces, filling with putty scaffolding and cleaning etc. including removing old paint by scrapping, blowlamp etc. complete all as directed by the EIC.

Providing and fixing 12 mm thick Calcium silicate sheet in false ceiling or equivalent including ceiling support of G. I. gird work 22 gauge at 600 mm c/c with 4 mm dia G. I. rods and 50 mm long dash fasteners, including cutting the sheet to required size making necessary opening of electrical fixtures A. C grills, fixing to correct line & level etc including removing the existing false ceiling carefully from existing frame work and disposing off debris from out of the premises etc complete all as per drawing and directed by the Engineering-in-charge.

Providing and fixing Plaster of Paris cornice size varying up to 175 mm and matching with existing adjoining patterned & design etc including scaffolding, tools and plants, material, labour etc complete all pas specification and as directed by the Engineer-In-Charge.

Providing and fixing in position at all floors, levels / heights 20 mm thick mirror polished natural stones slab for facia, jams frame in approved shade, finished sizes as directed including machine cut / hand cut, final cleaning, moulding and polishing of exposed edges, in line, level, plumb and fixing machine cut / hand cut, final cleaning, moulding and polishing of exposed edges, in line, level, plumb and fixing machine cut / hand cut, final cleaning, moulding and polishing of exposed edges, in line, level, plumb and fixing the stone with cm 1:3, 20 mm backing & overlapping of 20 mm shall be fixed with Araldite adhesive if required, with best workmanship, finishing, curing, including removing existing door frame, shutter & fittings etc. and depositing the same at dept store etc. complete all as per specifications, drawings & as directed by the Engineer-in-Charge

a) Providing & fixing laying/fixing in position 20 mm thick machine polished Granite stone / slabs of approved colour and quality including machine / hand cut, polishing, buffing the edges all in line, level, (Curvature corners if required) in cement mortar 1:3, 20 mm thick, with best workmanship, finishing, curing, complete in platforms, shelves, cills, jambs, facia etc. complete all as per directions of the Engineer-in-Charge.

Providing and fixing Glass fiber concrete grill (GRC) in approved shape, size & design & section with necessary fixing arrangement etc complete with primer and three coat of enemal paint etc complete as directed by the Engineer-in-Charge.

Providing & applying in background of Dr. Bhabha Bust with artistic painting with approved design & pattern, size & shape with approved make of enamel paint including scraping the surface applying the suitable wall care putty and finishing the surface with mirror finish including cost of labour, material, tools & plants including wastage etc. all as per specification and approved drawing and as directed by the Engineer-In-Charge