Regarding fixation of rates of vending zones and queues at various places within the municipal limits.

Earthwork in excavation by mechanical mens (Hydraulic excavator)/ manual means over areas(exceeding 30cm in depth, 1.5m width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by engineer-in-charge).

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc, in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for alllift.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level:1:4:8 derived from natural sources : 8 graded stone aggregate 40mm nominal size derived from natural sources)

Supplying and laying 80 mm thick precast concrete I-shaped interlocking paver block (grey colour/colour) with top layer of minimum 8 mm thickness having plain dimension 200x(160+120mm) of op cement smoothing glass finish skid resistant manufactured from rubber mould through vibro - compression machanism the compresive strength of concretepaver block shall not be less than 30 mpa (m-30) and wt 5 kg per no. confirming to ISI 15658-2006 Including cost of materials labour t&p etc required proper completion of work as directed by Engineer-in-charge

S/S of 22.4 to 53mm gauge stone ballast with stacking for measurment etc. all complete as per the direction of Engineer in charge

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

15MM cement plaster on rought side of single or half brick wall of mix-1:4 (1 cement : 4 coarse sand)

12MM cement plaster on rought side of single or half brick wall of mix-1:4 (1 cement : 4 coarse sand)

Finishing wall with weather coat by premium acrylic exterior paint applied @ 3.28 ltr/10 sqm(Asian or berger brand) of approved make and quality on wall with two or more coat to give an even shade including a priming coat with cement primer of approved brand and manufacturer exterior primer applied @2.20 kg/10 sqm after thoroughly brushing the surface free from mortar droppping and other foreign matters and sand papered smooth including supplying of all materials, labour, tools and plants etc. required for proper completion of the work.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.