Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC | ₹10.7 L Quoted ₹10.8 L | L1 | Accepted-AOC L1 |
Tender Value
₹10.3 L
EMD Value
₹20,700
Closing Date
15 Jan 2024, 5:30 pmClosed
Navin Kumar
ED-GURGAON
Construction of CHC at Village Bhora Kalan in District Gurugram (Pdg. 58.5 KVA D.G. set).
2023_HRY_336162_3
202376F838FD C6A4 4CA7 97D5 553EBDFD59C9664BAR
Open Tender
Electrical Works
Works
60 days
Bhora Kalan
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
₹20,700
Yes
16 Sept 2024
4 Jan 2024
16 Jan 2024
4 Jan 2024
15 Jan 2024
4 Jan 2024
Amount
SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings 100 amp 415 volts
EARTHING AND LIGHTENING ARRESTOR Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.
Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.
Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode.
Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.
Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.
Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required.
Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material.
Supply and erection of suitable compression type brass cable glands for underground Cable :- 70 sqmm to 95 sqmm Cable 3 to 3½ Core
Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. 95 sqmm
S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 90/75 mm outer dia/inner dia
RCC FOUNDATIONS FOR DG SET Providing RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations as per following specifications for 250 KVA DG set to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in charge. Note: As size and dynamic load of DG sets vary from manufacturer to manufacturer, item of DG set foundation have been included on the basis of cubic contents of RCC. 60 to 90 KVA DG Set
Supply and erection of cable on surface/ cable tray complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work 240 Sq. mm 3.5 Core Cable.
Supply, installation, testing and commissioning of minimum & nearest to 58.5 KVA (CPCB IV NORMS COMPLIANCE) water cooled silent type diesel generating set, rated at 3 phase, 415 volts, 50 Hz, 0.8 p.f. @ 1500 RPM both mountined on a comman MS base frame complete with MS fuel tank, 01 no. 12V battery and AMF control panel with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in charge of the work
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .