Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.3 LAccepted-AOC SNEH NAGAR COLONY NEAR ABKARI OFFICE SHIVAJI WARD SAGAR MP 47000 | SAGAR | SAGAR | MP | 47000 | L1 | Accepted-AOC aoc | |
| 2 | L2₹36.5 L+₹40,647 (1.12%)Rejected-Finance NEAR GURUDWARA JHANSI BHOPAL ROAD SAUGOR M P 470002 | SAUGOR | SAGAR | MADHYA PRADESH | 470002 | L2 | Rejected-Finance 2nd lowest bid | |
| 3 | L3₹42.0 L+₹5.9 L (16.3%)Rejected-Finance | L3 | Rejected-Finance 3d lowest bid |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
4 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAUGOR
GE SAUGOR
REPAIR, REPLACEMENT OF MISC BR AND EM NATURE OF WORKS UNDER GE SAUGOR.
2022_MES_571157_1
GE/SGR/TOK-57 OF 2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
SAUGOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAGAR
₹82,000
Yes
25 Feb 2023
26 Dec 2022
6 Feb 2023
16 Jan 2023
4 Feb 2023
20 Jan 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding and removed of rubbish off the premises complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified & directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified & directed.
M&L for brick work with with sub class 'B' bricks, straight orcurved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified & directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in mass concrete as in foundation fillings and mass concrete as sub bases of floors complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6, type C-1 (using 20mm graded stone aggregates) as in plinth protection surface finished even & smooth using extra cement providing with construction joints 10x20 mm filled with bitumen and sand mortar 1:3 complete all as specified and directed.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed.
All as per Srl item No.8 above but in dado / skirting etc over 10 mm thick rendering in CM 1:4 -ditto-
M&L for nonskid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade laid over and including 15mm thick screed bed layer in CM 1:6 complete all as specified & directed.
M&L for glazed ceramic joint free coloured tiles on vetical surfaces size 450mmx300mmx7mm thick laid over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles complete all as specified & directed.
M&L for 25 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in levelling course of sub base finished even and rough to receive the topping layer complete all as specified & directed.
M&L for 18mm to 20mm thick pre-polished Granite slab, machine cut, for floors/ shelves,cooking platforms window cill, steps, jambs and pillor top laid over and including 15mm thck CM 1:4 cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone.
M&L for rounding, chamfer, splays or arris and smooth finishing at the edges of stone as in steps, cooking platform and other similar locations complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and rubbish off the premises complete all as specified & directed.
M&L for cement plaster in two layers on stone masonry surfaces or surfaces other than fair face of brick work, first layer 15 mm thick in cement mortar (1:6) and second layer cement plaster 10 mm thick in cement mortar (1:4) mixed with WPC @ 3% by weight of ement, finished the surfaces fair and even complete all as specified & directed.(Note:-WPC will measured and paid seperately under respective item)
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished the surface fair and even complete all as specified & directed.
M&L for rendering 10 mm thick on ceiling in cement mortar (1:3), finished the surfaces fair and even complete all as specified & directed.
M & L for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl of walls complete all as specified and directed. Make Asian ACE or equivalent make as approved by GE
M&L for preparation of newly plastered surfaces of wall and applying 2mm thick Birla / J K wall care white putty on walls and applying two coat of Interior Acrylic emulsion over a coat of alkali resistant primer complete (internal wall) complete all as specified and directed.
M &L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of the surfaces complete all as specified and directed.
M&L for suspended false ceilling comprising of 4 mm thick non asbestos fibre cement bulding boards of size 595mmx595mm ‘E’ Board Classic Design Lake & hill including supply and fixing GI ‘Tee” grid frame work made of special section of M.S galvanized sheet 0.30mm thick , bottom portion painted with cellular nitro painting, warping the suspending wire around the existing wooden/steel purlin /rafter for suspending grid frame work of size 605mmx605mm suspended with 4 mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mmx24mmx0.60mm, cross runner tee 37mmx24mmx0.60mm and perimeter angle of 24mmx24mmx0.50mm thick. Perimeter angle to be fixed to wall with GI screw of 40mm long @ 450 mm c/c along the perimeter of wall including applying two coats of distemper oil emulsion complete all as specified and directed
M&L for machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658 - 2006 of 60mm thick, M-35 grade, laid over and including sand cushion not less than 25mm thickness complete all as specied and directed.
Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 sqm but not exc 4.0 sqm each, complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but not exc. 2 Sqm each complete all as specified and directed
Taking down shutters of any description not exc 1 Sqm complete all as specified and directed
S&F solid PVC frame (single rebated) of size 50mm x 47mm made out of wood grain printed PVC sheet reinforced with MS square tube complete all as specified & directed.
S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified & directed.
S&F 35mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (without sash bars) edges of farrming plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ,size of member of shutter as specified in SSR Part -I ,section 8, Clause 8.20(a) complete all as specified & directed.
M&L in repair of existing aluminium door with takingdown and refixing in the same location including all necessary fitment for repair complete all as specified & directed.
S& F glazed aluminum door powder coated of any colour consisting of frame of 63mm x 38 mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 84.45x44.45 mm , bottom rail & lock rail size is 101.80 x 44.45 mm & style of door shutter is 83mmx 44.45 mm glazed with 5mm thick tinted /colour glassof approved make with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor spring and floor door stopper incl. necessary joining cleats , glazing clips etc complete (aluminum section thickness 2 mm) confirming to IS complete all as specified and directed.
S&F powder coated aluminium ventilators partially fixed and partially openable either top hung or side hung and bottom portion fixed having 4mm thick frosted glass and top portion having two shutters external shutter with 4mm thick frosted glass and interal shutter having stainless steel wiremesh 0.36mm dia for Bath / WC including rubber gasket and alumium beading with necessary cleats / locking arrangement complete all as per standard engineering practice including necessary cutting holes on wall and floor complete all as directed by Engr-in- Charge (Note:-Aluminium section weighing not less than 0.55kg/m }
S&F aluminium windows and ventilators sliding type three track powder coated consisting of frame 91.80 mm x 45 mm shutters 39 mm x 18 mm with rollers and locking arrangements with 4 mm thick plain glass with rubber gasket and aluminium beading , Al. handle,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm )
S&F MS butt hinges 100 mm size medium weight, coled rolled and fixed with screws complete all as specified & directed.
S&F Stainless steel butt hinges 100 mm and fixed with screw complete all as specified and directed
S&F 200mm size Aluminium anodised barrel tower bolt of extruded section and fixed with screws complete all as specified & directed.
S&F extruded aluminium alloy handles, fabricated type., anodised Size of handle 125 mm fixed with steel screws complete all as specified & directed.
S&F 250mm long Aluminium alloy anodised Sliding door both with hasp, staple( bolt type) and fixed clips of sheet , cast or extruded sections and fixing bolts and sliding of extruded sections or cast -aluminium alloy and fixed with steel screws complete all as specified & directed.
S&F mild steel 150 mm, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified & directed.
Hacking out old broken glasses (any thickness size qualityor description) from wdn frames or fixed with beads complete all as specified & directed.
S&F 3mm thick sheet glass ordinary quality frosted on side fixed wdn beads / oil putty in square not exc 0.50 sqm in each pane complete all as specified & directed.
S&F stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed
S&F in replacement rotational moulded polyethylene water storage tanks capacity 500 litres (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position complete all as specified & directed.
S&F in replacement rotational moulded polyethylene water storage tanks capacity 1000 litres (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position complete all as specified & directed.
S&F 20mm Ball valves, high pressure of PTMT with high density plastic bass screwed for iron pipe and fixed (min wt 20mm - 210 gms) complete all as specified & directed.
Taking down 15 mm dia GI tubing and connection complete all as specified & directed.
S&F 15mm Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.
Taking down 20 mm dia GI tubing and connection complete all as specified & directed.
S&F 20mm Galvanised Mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.
S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc complete all as specified and directed.
S&Fin repair vitreous Chinaware EWC pedastal type closet white with P trap, seat & cover with flat bottom with hinging device all as specified and directed.
S&F in repair vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) and including connection to trap & to flushing pipe anti syphonage pipe etc (excluding flushing cistern) complete including making good to floor complete all as specified and directed.
S&F in repair vitreous China WHB white flat back size 550mm x 400mm with and including MS brackets, CP pillar tap fancy type - 01 No of 15mm bore, CP waste coupling 32mm dia, 32mm dia PVC waste pipe of suitable length and PVC connections 15 mm size with PTMT nuts of length 450 mm high pressure complete all as specified & directed.
S&F in repairs wall mixture with crutch for mixing hot & cold water, fancy type, chromium plated, screwed for iron pipe or for unions 15mm bore, complete all as specified and directed.
S & F as in repairs single lever basin mixer without popup waste and 450 mm long braided Hoses suitable for 15 mm bore iron pipe complete all as specified and directed. Make :Jaquar Cat No ARI-39001B or equivalent in Cera/Parryware.
S&F in repair Hand shower (Health faucet) with 8mm dia , one metre long flexible tube & wall hook complete screwed for iron pipe bore dia 15mm complete all as specified and directed. Make :Jaquar or equivalent in Cera/Parryware
S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing with cantilever brackets and connecting union to pipe overall size 915mm x 460mm; bowl size 410mm x 330mm x 160 mm complete all as specified and directed.
S&F in repairs CP bib taps, cast copper alloy, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.
S&F in repair C P Multi bib tap 2 in 1 , cast copper alloy fency type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.
S&F in repairs angle valve /stop valve15 mm bore dia, cast copper alloy, fancy type chromium plated, screwd down, high pressure, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.
S&F in repairs concealed stop valve 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup screwd down, high pressure, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.
S&F in repairs brass chromium plated shower rose fancy type, 125 mm size with swivel joints, including fixing to steel pipe or union complete all as specified and directed.
S&F PVC connections 15mm bore size 450 in length with both end brass/pvc high quality nuts complete all as specified & directed.
S&F in repairs 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified & directed.
S&F in repairs 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed and fixed to walls with suitable size mild steel clamps complete all as specified & directed.
S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified & directed.
S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall suitable size mild steel clamps complete all as specified & directed.
S&F PVC (SWR) bends 110 mm dia complete all as specified & directed.
S&F PVC (SWR) bends 110 mm dia with access door complete all as specified & directed.
S&F PVC (SWR) bends 75 mm dia complete all as specified & directed.
S&F PVC (SWR) bends 75 mm dia with accessable door complete all as specified & directed.
S&F PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal with acess door complete all as specified & directed. .
S&F PVC (SWR) 75 mm dia junction, single(single 'T') equal or unequal complete all as specified & directed. .
S&F 110mm bore PVC (SWR) vent cowl complete all as specified & directed.
S& F in repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement complete all as specified & directed.
S&F in repair 25 mm bore MS powder coated conduit curtain rods, suitable for door/window curtain with fancy type powder coated mild steel dooms with brackets fitted to each end and fixed to wall including removal of existing rod and making good complete all as specified & directed.
M&L for point wiring for the following with 1.5 Sqmm PVC insulated FR, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc. :-
One light point or fan point controlled by one switch
One Call Bell point controlled by one push button switch
One 5 Amp independent socket point controlled by one switch
One 3 pin, 5 Amp socket point with other switch on the same board
All as per Srl item No.80 here in before but for power point wiring using with 2.5 sqmm PVC FR insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire
M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc. :-
One light point or fan point controlled by one switch all as directed by Engr-in-charge
One Call Bell point controlled by one push button switch all as directed by Engr-in-charge
One 5 Amp independent socket point controlled by one switch all as directed by Engr-in-charge
One 3 pin ,5 Amp socket point with other switch on the same board all as directed by Engr-in-charge
All as per Srl item No.82 here in before but for power point wiring using with 2.5 sqmm PVC FR insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire
S&F modular switch, one way,6 Amp 230, 1 module complete all as specified and directed .
S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed
S&F modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed.
S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed .
S&F modular fan step regulator 120 Watt -2 module complete all as specified and directed.
S&F modular bell push 6A one module complete all as specified and directed.
S&F switch piano type flush, single pole, one way 5 A, 230 V complete all as specified and directed.
S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed.
S&F switch piano type flush, single pole, one way 15 A, 230 V complete all as specified and directed.
S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed
S&F ceiling rose, surface backlite, three terminal complete all as specified and directed
S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.
S&F in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed.
S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed .
S&F bell push flush type one way 5Amp 240 Volt complete all as specified and directed.
M&L for surface conduit sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC casing -n-caping/pvc conduit of suitable size . ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black and Earth – Green complete all as specified and directed
S&F in replacement MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed
S&F in replacement MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed
S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in the quoted rate .
S&F in replacement double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in the quoted rate
S&F LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make - Havells cat part No LHEXCGP7UN5W013 or equivalent make as specified in Appendix 'C' of Particular Specifications
S&F TL fitting 20watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. Make Havells Cat Part No LHEXBLP7PN1W020, 4 feet or equivalent make as specified in Appendix 'C' of Particular Specifications
S& F box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed . Make Havells Cat Part No LHEXBLP7IN1W009 or equivalent make as specified in Appendix 'C' of Particular Specifications
S&F in replacement laminated super hylem sheet of size 8" x 5" white colour 3mm thick of sizes including fixing of switches, sockets as per existing pattern complete all as specified and directed
All as per Srl item No.107.00 above but of size 5"x5"
All as per Srl item No. 107.00 above but of size 8"x10".
All as per Srl item No. 107.00 above but of size 8"x12".
All as per Srl item No. 107.00 above but of size 9"x11".
S&F LED bulb 10 watt suitable for angle / batten holder fitting complete all as specified and directed
S&F in replacement PVC insulated and unsheathed single core multi stranded copper conductor 1.5Sqmm (Nominal Area) drawn in existing conduit / batten / surface complete all as specified and directed
All as per Srl item No. 113.00 above but size 2.5 Sqmm
S&F PVC conduit of size 20mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site complete all as specified and directed
S&F PVC casing caping of size 1" x 1/2" including fixing on wall/ceiling with clamp/saddles for wiring wire all as required at site complete all as specified and directed
S&F cross arms, bracing, supports, clamps and back plate fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.
S&F framed work as in doors or gates of angle made out of FE 410-W Gde E-250 quality -A or other section with gusset plates, rails, fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
M&L including fabrication of existing panel cover with hing, nut and bolt with two coat painting complete all as specified and directed.
M&L for GI wire 4mm dia (8 SWG) stretching and fixing on pole for continious earth conductor, Guard wire 3.2 mm (10 SWG) for cradle (Hexagonal/rectangular) including binding wire round insulator complete all as specified and directed.
M&L for cutting of vegetation surrounding transformer, two poles, four pole structure at various sub station/ E&M installation and remove to a distance not exc 50 mtr complete all as specified and directed.
S&F in repair pipe galvanised iron light grade ( ISI marked) of 40mm bore with all fittings laid in trenches or on pole, crossing of road,fixed on wall for protection of cables complete all as specified and directed
All as per Srl item No 122 above but 50mm bore -ditto-
All as per Srl item No 122 above but 80mm bore -ditto-
All as per Srl item No 122 above but 100mm bore -ditto-
M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregates) as in foundation of stay assy/ pole etc, including form work complete in all as specified and directed
M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregates) for coping/plinth of poles, including necessary form work finished even & smooth without using extra cement all as specified and directed
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 sqmm, 3.5 core including taking down existing unserviceable cable and removing from site complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 150 sqmm, 3.5 core including taking down existing unserviceable cable and removing from site complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sqmm, 3.5 core including taking down existing unserviceable cable and removing from site complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm, 3.5 core including taking down existing unserviceable cable and removing from site complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm, 4 core including taking down existing unserviceable cable and removing from site complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm, 4 core including taking down existing unserviceable cable and removing from site complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm, 2 core including taking down existing unserviceable cable and removing from site complete all as specified and directed.
S&F in replacement of HT 33 KV aluminium insulated covered conductor single core of size 95 sqmm complete all as specified and directed
S&F in replacement of HT 11 KV aluminium insulated covered conductor single core of size 95 sqmm complete all as specified and directed
Excavation in trenches in hard/dense soil not exceeding1.5 meter wide and not exceeding 1.5metre wide and not exceeding 1.5metre in depth and getting out complete all as specified and directed
M&L for sand coushioning with dry and clean over and under the cable for protection of cable, 80 mm sand laid before laying the cable 150 mm sand after laying the cable and filling the sand in cable duct of inside the sub station building complete all as specified and directed. Note:-Punned thickness shall be measured and paid
M&L for laying of sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable complete all as specified and directed
Supplying and laying reinforced precast concrete cable cover, class HV, type 2, flat size 450mm x 180mm x 40mm complete all as specified and directed
Removing excavated materials (soil) not exceeding 50metre and depositing where directed at a level not exceeding 1.5 meter above starting point complete all as specified and directed
Returning filling in with excavated soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Taking down and relaying reinforced precast concrete cable cover, class HV, type 2, flat size 450mm x 180mm x 40mm or any size complete all as specified and directed.
Taking down and relaying bricks of any size for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable complete all as specified and directed.
Taking down and re-laying/re-routing of LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminium conductor of any size laid in trenches or fixed on wall/floor/polesincluding taking out old unserviceable/ serviceable bricks, cable covers, GI pipe of any size for reuse from trenches for removing all as specified and directed
Taking down and re-laying/re-routing of HT UG armoured heavy duty electric cables 11000 volts grade with aluminium conductor of size 95 to 185 Sq mm 3 core laid in trenches or fixed on poles including taking out old unserviceable/ serviceable bricks, cable covers, GI pipe of any size for reuse from trenches for removing all as specified and directed
Supply, installation, testnig and commissioning in repalcement of ACB 4 Pole, 415 V, manual drawout type with microprocessor release of capacity 630 Amps 50 KA fixing in the existing panel with necessary modification connections etc including suitable CTs complete all as specified and directed.
S&F euroload on-load change over switch 400 Amps 4 pole 415V fixed in existing LT panel with handle complete all as specified and directed.
S&F euroload on-load change over switch 250 Amps 4 pole 415V fixed in existing LT panel with handle complete all as specified and directed.
S&F onload changeover switch (side handle) in sheet enclosure, 100 Amps, four pole, 415V, 50Hz with handle complete all as specified and directed
S&F HRC fuse 6 to 16 Amps as per existing to be fixed in HT panel complete all as specified and directed.
S&F for battery 12V 7 AH maintenance free sealed lead acid battery for portable OT light complete all as specified and directed
M&L for checking, cleaning and making functional in all respect of online UPS of any capacity including cleaning inside and outside complete all as specified and directed
S&F replacement of IGBT suitable for 5KVA online UPS as per existing complete all as specified and directed.
S&F replacement of SMPS suitable for 5KVA online UPS as per existing complete all as specified and directed.
S&F replacement of Control card suitable for 5KVA online UPS as per existing complete all as specified and directed.
M&L for replacement of driver card suitable for 5KVA online UPS as per existing complete all as specified and directed.
M&L for replacement of EP ROM card card suitable for 5KVA online UPS as per existing complete all as specified and directed.
M&L for replacement of transformer OP sense suitable for 5KVA online UPS as per existing complete all as specified and directed.
M&L for replacement of capacitor suitable for 5KVA online UPS as per existing complete all as specified and directed.
M&L for battery of capacity 2 volts 100 AH at 10 hrs rate suitable for VCB DC supply as per existing including connecting links, lugs/thimbles, distilled water etc compete all as specified and directed.
M&L for checking of DC battery charger 30Volts of any size with minimum requirement of material all as per site requirement complete all as directed. (Note : Quoted rates shall be deemed to include opening of bettery charger accessories and taking the defective items to the approved workshop)
M&L for checking of earth resistance of earthing pit at different location as indicated by Engr-in-Charge with the help of earth resistence testing kit including making proper record of test report and getting signature of user and Authoritries complete all as specifed and directed
M&L for checking of earth resistance of lightning conductor installed over various buildings, including checking of air termination rods, earth continuity GI/aluminium strip and rectifying minor defects complete all as specifed and directed
M&L for replacement of PVC/Porcelain saddle used for fixing of GI/Aluminium strip on wall/roof including screw, wall plug etc complete all as specified and directed.
M&L for Air termination single pointed copper rod 12 mm dia 300mm long fixed on pole near gantry structure complete all as specified and directed.
M&L for earth continuity conductor or main earthing lead fixed to wall & roof top in grid connection with air termination rod of size 25X 3mm aluminium strip including PVC saddles complete all as specified and directed.
M&L for earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25X4mm galvanised iron or steel wire complete all as specified and directed.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtr below ground level connected to galvanized iron strip 25x4mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber) 1:2:4 type B-1 using 20mm graded stone aggregate copy shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4 funnel wiht wire gauge of 22 gauge (0.68mm) 8 mesh per liner inch, 50 mm thick cover of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with 8 mm four MS bars @ 80mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (1991) and specified including provision of earth strip protected by 40mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, all excavation and earth work & connectiing the earthing to an earthing test point as specified and testing on complete all as specified & directed.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtr below ground level connected to and including galvanised earth lead 4.0 mm dia as earthling lead by means of bolts, nuts, check-nuts, and washers of GI or steel, PCC (concrete chamber) 1:2:4 type B-1 using 20mm graded stone aggregate copy shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4 funnel wiht wire gauge of 22 gauge (0.68mm) 8 mesh per liner inch, 50 mm thick cover of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with 8 mm four MS bars @ 80mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (1991) and specified including provision of earth wire protected by 15mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, all excavation and earth work & connectiing the earthing to an earthing test point complete all as specified & directed
S&F street light pole junction box factory made Triple Pole and neutral IP 65 thermoplastic PC-GFS polycarbonate oval shape, weather proof, rust free, dust free and corrosion free, with internal embedded polyureathin material gaskit, junction box should be flame retardant and self extinguish in accordance with IEC-60695-2-11, with multilevel knockouts for cable glands in different sizes. The junction box compression of optional cable entry in four side, 25 Sqmm terminal block - 04 Nos, MCB SP 10A with flap - 01 No, Disconnected type neutral terminal 6 Sqmm-01No and Earth terminal block 4 Sqmm - 01 No including mounting arrangement complete all as specfied and directed Make - Hensel cat./DRW No HENKFPJB-5 of equivalent make of same specification.
S&F in repairs round flexible PVC insulated copper cable of size 1.5 sqmm 3 core, 1100 volt grading complete all as specified and directed.
S&F PVC conduit 20mm dia including fixing on wall/pole with necessary fixing arrangement complete all as specified and directed.
S&F in replacement of MS Chequered plate of 5 mm thick or over in thickness in available of Fe - 290 Gde E165 and fixed in substation building including painting with black colour over one coat of red oxide primeover and making provision for lifting the plate from duct complete all as directed.
M&L for glow sign board for E/M installation with computerised words printed on PVC board (matter and size of letters as approved by Engr-in-Charge) including fabrication of work, angle iron, electrical connection with suitable copper wire and LED tube light fittings complete all as specified and directed.
S&F framed electrical safety wheather proof chart with latest procedure for giving first aid to electricuted victim complete all as specified and directed.
M&L for painting and writing with paint in all existing sign boards such as SM/MES No board of equipments and other board as per the direction given by Engr-in-Charge in E/M installation 33KV MRS, Berthuma and Chittora with skilled painter after applying two coat synthetic enamel paint over a primer complete. Content, colour and letter size as approved by Engr-in-Charge complete all as specified and directed.
M&L for computerised print on PVC board with blue background and white letter of suitable size indicating incoming from, outgoing to the area of distribution, capacity and CT ratio fixed at the front side of each panel both HT and LT panel section wise complete including necessary fixing arragement in E/M installation/sub station (matter and size of letters as approved by Engr-in-Charge) complete all as specified and directed.
M&L for LED bollard 10w and one meter height energy saving, environmental friendly, long life aesthetically designed aluminium landcape luminaire for diffused lighting with high power LED light source complete all as specified and directed
M&L for bay bright light energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium canopy fixture with high power LEDs as light source, suitable for lighting under canopy etc complete all as specfied and directed
M & L for painting of PCC pole (Cross arms, clamps etc) with 2 coats of aluminium paints and including preparation of surfaces and painting upto the height of 1.2 m pole 9 m long with 2 coats of synthetic enameled paint including preparation of old surfaces and making colour bands and rewriting the pole number complete all as directed.
M & L for painting of tubular/ rail pole (Cross arms, clamps etc) with 2 coats of aluminium paints and including preparation of surfaces and painting upto the height upto 9 m pole with 2 coats of synthetic enameled paint including preparation of old surfaces and making colour bands and rewriting the pole number complete all as directed.
S&F bamboo/wooden ladder of height not less than 20 feet of good strength tobe used for external complaints of various nature complete all as specified and directed.
M & L for painting of steel srtuctures in MRS at Koregaon including all cross arms, clamps etc with 2 coats of aluminium paints and including preparation of surfaces and painting upto the height upto 11m with 2 coats of synthetic enameled paint including preparation of old surfaces complete all as directed.
M & L for repairing and servicing two/four pole structures comprising of following works :- (a) Dismantling the ACSR jumper connection from Air break Gang operated drop out fuse end lightening arrestors etc from the two poles structures, replacing the complete jumpers in to new with ACSR conductors including connecting with suitable thimbles connections/binding/PG clamps and providing monoplast compound over binding/thimble connections b) Removing the complete rusted bolts, nuts and washers and replacing with new bolts, nuts and washers (c) Disconnecting the AB switch knives cleaning and servicing by lubricating the moving parts terminals with petroleum jelly. (d) Cleaning the exposed surfaces of two pole structure complete and painting with two coats of synthetic enamel aluminium paint all as specified and directed by Engr-in-Charge
Cutting /trimming of tree branches upto 80 mm girth along LT/HT OH electric lines which or growing /touching or falling on ACSR conductor /poles or near by sub stns etc at any height from GL and making sufficient clearance not less than 1.5 mtr from ACSR conductor/ poles/ structure and taking down the same on the ground carefully avoiding the damage of and removing to a distance including stretching of conductor as required where directed by Engr - in -charge. Note :- Tree cutting will be maintain for periodisity for three months depending upon the grougth of three branches.
SAGAR MOTOR AND TRACTOR CO
shivansh traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .