Creating physical environment for digital forensics at 7th floor, CBI HQ Building, New Delhi 110003

Grand Total Amount ₹ 44,07,617.00

Providing and laying Vitrified tiles in floor in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid

on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)

11.41A jointing with grey cement slurry @3.3 kg/sqm including grouting

3.00 the joints with white cement and matching pigments etc. The

tiles must be cut with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch trowel, plier, wedge,

clips of required thickness, leveling system and rubber mallet for

placing the tiles gently and easily

Size of Tile 1200x600 mm Sqm 15 1407.05 21105.75

Digitally signed by AMIT

Providing and laying Carpet tiles of Yarn type Eco Solution Q® Nylon

(Nylon 6) only; Multi-Level Pattern Loop, manufactured using 100%

solution dyeing process, Tiles of size 23cms x 91cms or equivalent as

per direction of EIC and site requirement with SSP® Soil Protection

treatment ™ or equivalent containing properties of Stain Repel, with

Ecoworx® Tile- 100% PVC Free/ 100% Bitumen Free/ 100% Recyclable -

backing system with recycled content, made from thermoplastic

polyolefin compound with reinforcing layer high-performance

environments requiring modular flooring, having tufted yarn weight of

542.5 gsm/sqm and average yarn density of Minimum 9143 oz/cu. yd.

4.00 MR or more, Nominal total thickness 5.42 mm minimum, Radiant Panel class Sqm 110.00 2856.00 314160.00

1 rated (ASTM E648), NBS smoke < 450, Pill test -Passed, Anti Static

Property less Than 3.5 kv, Texture Appearance Retention Rating of 3.5

for Severe Use, Anti Microbial Treatment-Passes (AATCC-174). CRI

Green Label Plus is certified for indoor air quality, including fixing/

installation with Low/ Zero VOC content Adhesive. Impact Sound (ISO

10140-3) 20 dB & Sound absorption (ISO 354) 0.2 Class D.or equilent

as per direction of EIC and site requirement

FALSE CEILING WORKS

Digitally signed by AMIT

Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to

the angle hangers of 25x10x0.50 mm of required length with nuts &

bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing of

1200 mm centre to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each having lips

of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including

12.45 fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20

5 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with

the help of rawl plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall screws of size

3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended

jointing compound , jointing tapes , finishing with jointing compound in

3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification and also

including the cost of making openings for light fittings, grills, diffusers,

cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-

12.45.1 (Part I) :2011 (Board with BIS certification marks) Sqm 45.00 1145.95 51567.75

Digitally signed by AMIT

Providing and fixing mineral fibre false ceiling tiles at all heights of size

595X595mm of approved texture, design and pattern. The tiles should

have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%,

Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per

(BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-

Grid of hot dipped all round galvanized iron section of 0.33 mm thick

(galvanized @120 gsm) comprising of main T runners of 15x32 mm of

length 3000 mm, cross T of size 15x32mm of length 1200 mm and

secondary intermediate cross T of size 15x32 mm of length 600 mm to

form grid module of size 600x600 mm suspended from ceiling using

galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer

diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod

up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm,

spaced at 1200 mm centre to centre along main ‘T’. The system should

rest on periphery walls /partitions with the help of GI perimeter wall

angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed

to the wall with help of plastic rawl plug at 450 mm centre to centre &

40 mm long dry wall S.S. screws. The exposed bottom portion of all T-

sections used in false ceiling support system shall be pre-painted with

polyester baked paint, for all heights. The work shall be carried out as

per specifications, drawings and as per directions of the engineer-in-

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC

Digitally signed by AMIT

STRETCHED FABRIC CEILING : Supply & installationof fabric false ceiling

/ wall formed out with TRANSLUCENT Printed fabric coverings made out

of polyester knitted fabric coated with Polyurethane (PU). The

TRANSLUCENT Printed fabric width of 2m, 3m, 4.1m &5.1m with weight

of 200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt,

smooth and uniform with blanq color and light transmission of 50%. The

tear strength of fabric should be accordance to CH: 4,5daN; TR: 6,5

daN. The fire rating should be accordance to B-S1, d0. The fabric should

be humidity resistant and free of carcinogenic substances(CMR) or

volatile organic Compounds (VOC’s). At labeling in accordance with the

French decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric

should be installed with approved manufacturer guidelines. It comes

with 10- year manufacturer guarantee. The installation of TRANSLUCENT

7 MR Printed fabric should be dry installation & done at room temperature Sqm 15 8985.00 134775.00

using CLIPSO PVC, ABS Grippers. Clipso ceiling base to be made of MS

or Wooden frame finishing to a flush finish of tapered and square edges

in desired design as per architect specification.Supply of LED Lights

behind the Fabric Wall/ False ceiling in modules/ PCB with recommended

wattage as per manufacturer's standards to give an effect of ambient

lighting. LED make MLS/ Bridgelux / Osram- SMD 2835, LED spacing /

Pitch should be atleast 73 -80mm with beam angle of 170 degree,

Colour temperature shoud be as per design intent 3000K/4000K/6000K.

Wattage of 8-10W/mtr. LED modules/ PCB should be positioned properly

to provide an even light flow, casting noshadows or dark spots. LED

Driver Cost included.

WALL FINISHES WORKS

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling

height consisting of G.I. frame and required board, including providing

and fixing of frame work made of special section power pressed/ roll

form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive),

consisting of floor and ceiling channel 50mm wide having equal flanges

of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the

spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia

meter 50 mm length or suitable anchor fastener or metal screws with

8 9.105 nylon plugs and the studs 48 mm wide having one flange of 34 mm and -

other flange 36 mm and 0.50 mm thick fixed vertically within flanges of

floor and ceiling channel and placed at a spacing of 610 mm centre to

centre by 6 mm dia bolts and nuts, including fixing of studs along both

ends of partition fixed flush to wall with suitable anchor fastener or

metal screws with nylon plugs at spacing of 450 mm centre to centre,

and fixing of boards to both side of frame work by 25 mm long dry wall

screws on studs, floor and ceiling channels at the spacing of 300 mm

centre to centre.

Digitally signed by AMIT

The boards are to be fixed to the frame work with joints staggered to

avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick

having two flanges of 9.5 mm each) to be provided at the horizontal

joints of two boards, fixed to the studs using metal to metal flat head

screws, including jointing and finishing to a flush finish with -

recommended jointing compound, jointing tape, angle beads at corners

(25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer

suitable for board as per manufacture's specification and direction of

engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire

9.105.1 rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: SQM 60.00 1,797.65 107859.00

INSULATION- Providing and fixing thermal insulation with Resin Bonded

rock wool conforming to IS: 8183, having density 48 kg/m3,50 mm

9 12.62 thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh screw, SQM 60.00 277.90 16674.00

rawel plug & washers and held and in position by criss cossing GI wire

etc. complete as per directions of Engineer-in-Charge.

Supply and installation of Aluminium Framed Glass Partition for minimal

frame, room dividing solutions. Single glazed demountable glass

partition using clear toughened glass in proprietary natural anodized

finish. Clip-on / U-Section of size 30mm x 21mm with suitable gaskets

for insertion with glass. It also consists of clipper two way Clear Profiles,

90 Degree L Junction and T Junction profiles suitably to be used as per

room configuration designs.

Glass thickness - 10mm (LSG).

All Profiles are min 2.5mm thickness excluding 20 microns of Anodizing,

Standards applicable.

• Aluminium profile made by Al Alloy 6063-T6 Grade including all the

fittings complete as per site requirement and direction of EIC

Providing and fixing specified wood frame work consisting of battens

11 8.27 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug

etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood cu m 0.50 163814.10 81907.05

Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type, core of block board construction with

12 9.21 frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on both

faces of shutters:

35mm thick including ISI marked Stainless Steel butt hinges with

13 9.21.1 necessary screws Sqm 20.00 2015.75 40315.00

Digitally signed by AMIT

Extra for providing lipping with 2nd class teak wood battens 25 mm

14 9.23 minimum depth on all edges of flush door shutters (over all area of door Sqm 20.00 401.40 8028.00

shutter to be measured).

Providing and Fixing ESDH -22X922 mm Dtype Handle Material :

Stainless Steel. Finish : Satin Stainless Steel (SSS). of approved make

15 MR and model all complete as per the direction of Engineer-in-charge. Each 5.00 6070.00 30350.00

Providing and Fixing SS Mortise Lock Body SB/TB for door thickness 25-

50 mm for wooden doors of approved make and model all complete as

16 MR per the direction of Engineer-in-charge. Each 5.00 896.00 4480.00

Providing and Fixing Double cylinder Floor Spring- for wooden door

with Closing Force EN 3 with Maximum door weight 105 Kg. Maximum

door width 950mm.Closing speed : 130°

Final closing speed : 15-0°. Hold Open (standard): 90° hold open.

Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with 5 Years

Warranty against manufacturing defect. CE certified for wooden doors all

complete as per the direction of Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to

frame with 10mm diameter bolts, nuts and wooden plugs and

18 9.53 embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 Each 20.00 194.35 3887.00

cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal

Providing and Fixing EFS top and Bottom Strap for wooden doors of

19.00 MR approved make and model all complete as per the direction of Engineer- Each 5.00 1128.00 5640.00

Providing and Fixing EDL Dead lock Back set- 50 mm with Key Hole for

20.00 MR wooden doors of approved make and model all complete as per the Each 5.00 954.00 4770.00

direction of Engineer-in-charge.

Providing and Fixing ECY 1060- 60 mm SS Cylinder One side knob and

one side regular key (3 key) for wooden doors of approved make and

model all complete as per the direction of Engineer-in-charge.

Providing and fixing 12mm thick frameless toughened glass door shutter

of approved brand and manufacture, including providing and fixing top &

bottom pivot & double acting hydraulic floor spring type fixing

22 21.18 arrangement and making necessary holes etc. for fixing required door Sqm 10.00 4540.70 45407.00

fittings, all complete as per direction of Engineer-in-charge (Door

handle, lock and stopper etc.to be paid separately).

Digitally signed by AMIT

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl,

special CRYSTAL-effect film to reproduce Sand-blasting effect on glass

with customised designs, thickness of 2 mil (0.05mm) without adhesive

& 3mil (0.8)with adhesive having minimum tensile strength of 3.5

pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of

installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass

23 MR Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to Sqm 15.00 2467.00 37005.00

15yrs (indoors) must be endorsed by 3M India Limited Architectural

Market Department. Contractors payment wouldn't be released until &

unless he/she produces orginal warranty certificate from the

Providing and fixing of 6 mm thick premium GRIHA rated Lacquered

glass of approved color by Architect/ Client / Customer, fixed with

compatible neutral grade silicon on a perfectly levelled 12mm thick

water proof marine plywood / MDF / Mineral fibre board which is

mounted on RCC wall/any other structure. Lacquered glass must be

made industrially (using curtain coating process); opaque (if viewed

against a support wall), uniformly coated with PU lacquer (50 micron

24.00 MR thick coating or more); panel to panel colour consistency (measured by Sqm 10.00 4868.00 48680.00

photo spectrometer); highly durable (passes hardness test for minimum

220 oscillations); humidity resistance (conforms to BS EN 1036 1999

or equivalent) ; environmentally friendly having Low VOC (no lead, no

arsenic, no copper, no formaldehyde), low VOC content <100g/l.

Silicone used should not react with lacquer coating (compatible neutral

Digitally signed by AMIT

Providing & supplying of Window Blinds as per the approved sample in

required shade and style consisting, of Roller Blindscomprising of optima

screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-

480G weight per sq m, Thickness 0.67 mm, Yarn count 18-19/cm,

having fire resistance standard – NFPA 701-89 small testing ISO-5659-2

.The tear resistance should be complying to ISO4674 & breaking

resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick,easy

and safe installation,moulded plastic with steel spring support and

inserted into the tube end. It shall be driven by a ball chain pulley with

ball chain and can be positioned at right side or left hand side of the

Shade. The Shade when lowering or raising, shall be automatically

locked in position upon release of the ball chain by means of a built in

friction lock.Universal clutch for left and right hand operation.Chain Gear

Ratio of 1.75:1.The END PLUG shall be molded of plastic witha steel

location pin. The plug shall be inserted into the tube end. (Opposite to

the Drive Unit) for ease of installation. TheSUPPORT BRACKETS shall be

of coated steel & provided with covers and used in right hand or left

hand positions differentiated by the acceptance of the of the rectangular

drive unit support or the round idler plug pin.Can beinstalled (a) On Face

(b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be

protruding outside maximum of80mm.The ROLLER TUBE shall be of

extruded aluminum with 37mm internal diameter & skin thickness of

1mm and shall incorporate a key way integral with the tube to

accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made

up of powder coated steel. The BALLCHAIN shall be 2mm diameter cord

with 4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch

to form an endless ballchain.It is used for raising or lowering action of

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to

300 mm high and in line with external glazing as per details of Architect.

26 MR Rate to include finishing exposed surfaces of the Pelmet with enamel metre 15.00 1782.00 26730.00

paint of approved shade or 1mm laminate.

Providing and fixing plain lining with necessary screws/ nuts & bolts/

nails, including a coat of approved primer on one face, and fixed on

wooden/ steel frame work, complete as per direction of Engineer-in-

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type Sqm 45.00 1084.60 48807.00

Providing and fixing plain lining with necessary screws/ nuts & bolts/

nails, including a coat of approved primer on one face, and fixed on

28.00 MR wooden/ steel frame work, complete as per direction of Engineer-in-

4mm thick MDF Board Sqm 45.00 335.00 15075.00

Digitally signed by AMIT

Providing and fixing metal system up to ceiling height, which includes

frame work made of special section power pressed/ roll form G.I. sheet

with zinc coating of 120 GSM, consisting of Boral U track 52mm wide

having equal flanges of 30mm and 0.55mm thick (Base metal thickness)

fastened to the floor slab and ceiling soffit using rawl plugs with screw at

600mm centers, with first & last fixing point at not greater than 50 mm

29 MR from either end. Boral C studs 50mm wide having one flange of 34mm, Sqm 45.00 1110.00 49950.00

other flange 36mm, lip size 6 mm and 0.55mm thick installed

perpendicularly within the flanges of floor and ceiling channels located

directly opposite to each other at not more than 610mm centers.

Maintain 5 to 10mm gap between C Stud and web of U Track.

Providing & Fixing decorative high pressure laminated sheet of plain /

wood grain in gloss / matt/ suede finish with high density protective

30 9.127.2 surface layer and reverse side of adhesive bonding quality conforming to Sqm 45.00 764.00 34380.00

IS : 2046 Type S, including cost of adhesive of approved quality- 1.0

Providing & fixing 12mm Thick. 100% Acrylic solid surface of approved

make and colour using approved Adhesive to 12 mm thk. Waterproof

Plywood of approved brand as per shape, pattern & details given in the

31 M.R. drawing. The rate includes providing & fixing beading, cutting, SQM 10.00 1850.00 18500.00

scaffolding, nails, all materials, labour, lead, lifts, HOM etc., complete.-

for Lift Cladding. (The make, Shade, pattern etc., to be approved by

Engineer in charge).

Providing and fixing wallpaper as desired by client and EIC

Providing of linear and horizontal grooved acoustic wall panels with 9

mm thick board panelling having sound absorption property on walls

over existing surface. The panels are made of fibreboard of density

about 780 kg/m3 with low formaldehyde content.

Providing and applying plaster of paris putty of 2 mm thickness over

34 13.26 plastered surface to prepare the surface even and smooth complete. sqm 350.00 214.30 75005.00

Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound ) content less than 50 grams/

35 13.83 litre of approved brand and manufacture, including applying additional -

coats wherever required to achieve even shade and colour.

Applying priming coats with primer of approved brand and manufacture,

36 13.85 having low VOC (Volatile Organic Compound ) content. -

Digitally signed by AMIT

With ready mixed pink or grey primer on wood work (hard and soft

wood) having VOC content less than 50 grams/ litre

Providing Fabric Partition of required width ranging from 50 mm to 75

mm, GI Framing , fixing of fabric with Ply of desired shape inclduing

fixing the same on wall inclusing fastners, GI Cips,mounting

arrangements Complete in all respects

Supply Installation testing and commsioining of Wooden Podium as per

design and pattren approved by client/EIC.

TOTAL WALL FINISHING WORKS 662086.05 1567959.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION

S NO UNIT QTY RATE

2022 DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan

point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in

surface / recessed medium class PVC conduit,

with modular switch, modular plate, suitable GI

box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single

core cable etc as required.

Wiring for group controlled (looped) light point/

fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in

2 1.55 surface / recessed PVC conduit, and earthing

the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as

Supplying and fixing following modular switch/

socket on the existing modular plate & switch

3 1.24 box including connections but excluding

modular plate etc. as required.

Digitally signed by AMIT

1.24.4 3 pin 5/6 amp socket outlet Each 30 122.00 3660.00

1.24.5 6 pin 15/16 amp socket outlet Each 30 197.00 5910.00

Supplying and fixing modular blanking plate on

the existing modular plate & switch box

excluding modular plate as required.

Supplying and fixing following size/module, GI

box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith

earth wire with the following sizes of FR PVC

6 1.14 insulated copper conductor, single core cable

in surface/ recessed steel conduit as required

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 100 233.00 23300.00

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 180 275.00 49500.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 150 334.00 50100.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 20 439.00 8780.00

C CABLES TERMINATION

Supplying and making end termination with

brass compression gland and aluminium lugs

7 9.1 for following size of PVC insulated and PVC

sheathed / XLPE aluminium conductor cable

of 1.1 KV grade as required.

Digitally signed by AMIT

Supply & laying the on cable tray/ Race ways

of following sizes of PVC sheathed PVC/XLPE

insulated Aluminium/Copper conductor

8 MR armoured cable of 1.1 KV grade conforming to

IS:7098 part-1 / IS:1554 part-1 respectively &

4 core x 25 sqmm Copper Cable Unarmoured

4 core x 16 sqmm Copper Cable Unarmoured

(b) Cable Metre 1284.00 19260.00

D Distribution Boards

Supplying and fixing 5 amps to 32 amps rating,

240/415 volts, "C" curve, miniature circuit

breaker suitable for inductive load of following

poles in the existing MCB DB complete with

connections, testing and commissioning etc. as

2.10.1 Single pole Each 36 256.00 9216.00

Supplying and fixing following rating, four pole,

(three phase and neutral), 415 volts, residual

current circuit breaker (RCCB), having a

2.15 sensitivity current 30 mA in the existing MCB

DB complete with connections, testing and

commissioning etc. as required.

Digitally signed by AMIT

Supplying and fixing following way, vertical type

three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/

recess, complete with tinned copper bus bar,

10 2.5 neutral bus bar, earth bar, din bar,

interconnections, powder painted including

earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing following rating, double

pole, (single phase and neutral), 240 volts,

residual current circuit breaker (RCCB), having

11 2.14 a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with

connections, testing and commissioning etc. as

PROVISIONS FOR VOICE, DATA, SECURITY

MR Supply, Installation, Testing and

12 Commissioning of USB port Socket in single Each 10 718.11 7181.10

Supply, installation, testing & Commissioning

13 MR of 2 module 16 A Socket for floor box box. Set 10 371.29 3712.87

Supplying and fixing following modular switch /

socket on the existing modular plate & switch

14 1.24 box including connections but excluding

modular plate etc. as required.

Digitally signed by AMIT

1.24.7 TV socket outlet Set 30 148.00 4440.00

Supply, Installation, Testing and Commisioning

of Galavanized Iron (GI) Raceways along with

required suitable number of GI couplers for

MR joining raceways and fixing GI brackets and all

accessories complete in all respect as per the

directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Metre 20 1279.38 25587.60

(b) 225mmx38mm(GI) - 3 compartment Metre 10 1027.52 10275.20

Supply, Installation, Testing and Commisioning

of Junction boxes for direct access to cables at

the intersection of raceways supplied

completely with base and cover plates, height

adjustable junction box 65- 90 mm including all

16 accessories complete in all respect as per the

directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6

grade, 0.7 mm solid copper conductor PE

insulated, shielded with fine tinned copper

17 1.19 braid and protected with PVC sheath in the Rm 200 47.00 9400.00

exisitng surface/recessed steel/ PVC conduit

Digitally signed by AMIT

Supplying and fixing of following sizes medium

class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and

18 making good the same incase of recessed

conduit as required

Supplying and Installation of following size

perforated of painting with powder coating M.S.

cable trays of perforation of not more than

17.5% in convinient sections, joined with

4.1 connectors suspended from the cieleing with

19 MS suspenders including bolts and nuts

painting suspenders etc as required

450 mm width x 50 mm depth x 2 mm

Providing and fixing 25 mm X 5 mm copper

20 5.14 strip on surface or in recess for connections Metre 10 1162.00 11620.00

etc. as required.

Supply of circular Recess LED downlight fixture

suitable for 15 Watt LED Complete with

21 MR suitable Electronic Ballast, Lamp etc. as 8,700.00

required. Each 6 1,450.00

Supply of 2"X2" Square recessed LED

downlight fixture suitable for 36 Watt LED

22 MR Complete with suitable Electronic Ballast, 42,840.00

Lamp etc. as required. Each 3,570.00

Providing & fixing of pop box of havig 1

23 MR etherent, 1 Power/UPS Power, HDMI port Each 1 8000.00 8,000.00

Complete in all respects.

Digitally signed by AMIT

Installation of 5 KVA Single Phase in Single

Phase out online UPS system with suitable

Nos of mainetence free VRLA batteries for 30

minute backup Complete in all respects

Total of Electrical items 602206.34

Digitally signed by AMIT

Description UOM Qty Rate DSR Amount

A. UTP Components for Data & voice

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid

1. (DSR copper conductors for Connectivity of Hub room to End

1.53.1) Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Class

E, 23 AWG, Unshielded LSZH Cable, C6

Supply, Installation, Testing and Comissioning of I/O port for

2 CAT6 cable termination at Work Station end. Keystone Nos. 18 450.00 8100.00

Unshielded Outlet, 180DG C6, Blue

Supply, Installation, Testing and Comissioning of I/O port for

CAT6 cable termination at Work Station end Redantant .

3 Keystone Unshielded Outlet, 180DG C6, Yellow Nos. 18 450.00 8100.00

Supply , Installation , Testing and Comissioning of CAT6

patch cord 2 Mtr (7 feet) for information outlet (I/O) to end

4 user device connectivity.High Speed Gigabit 24AWG U/UTP Nos. 18 400.00 7200.00

Patch Cord Blue, LSZH, C6, 2M

Supply, Installation, Testing and Comissioning of CAT6

patch cord 1 Mtr (3 feet) for information outlet (I/O) to Rack

5 End Redantant device connectivity. High Speed Gigabit Nos. 18 285.00 5130.00

24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow)

Supply, Installation, Testing and Comissioning of 24 port

6 Loaded Jack Panel for CAT6 cable termination at rack end. Nos. 2 4800.00 9600.00

Biometric System

Supply, Installation, Testing and Commisioning of smart

card reader/proximity card readers including fixing the same

1 on doors, power supply arrangement complete in all respect Nos 6 2336.00 14016

Digitally signed by AMIT

Supply Installation Testing & Commissioning of Access

Control Software cum Visitor Management Multi Reader and

controller confuguration and upgradable to Enterprise level

with 1000 users. Databse Supports: MS SQL, Oracle, and

MS Access database types. Type of technology supports:

IRIS Sacnner, Biometric, Face, RFID , etc supports

template management , Highly secured communication with

server,Allows for real- time monitoring of system status and

user activities with optional audio alerts. tamper detection,

network communication loss, and many other system

attributes. including desktop i7, 12th generation processer

16 Gb RAM, 22" LED/TFT windows operating system, UPS

2 KVA complete in all respect

SITC of Access IP Master Controller with Enclosure &

including SMPS Power Supply- controllling 2 access points

Universal 2 Reader TCP/IP Controller Expandable upto 6

3 Reader with exit reader module,4 Programmable inputs & 4 Nos 3 39,500 118500

outputs 100 mA MAX ),Temperature: 0 to 70°C (35 -150°F);

Humidity: 20 to 80% RH (non-condensing) , 3000 USERS &

3000 transactions,2 Reader.

Supply, Installation, Testing & Commissioning of Smart card

compatible with Frequency Excitation (13.56 MHz) Mifare/I-

4 class technology smart Card. Memory Type Nos 20 400 8000

EEPROM,Complies with ISO/IEC standards for thickness.

Supply Installation Testing and Commissioning of single

leaf/double leaf heavy duty 600 LBS Door Electro Magnetic

Lock with complete compatiable Bracket UL Listed.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

SNO. M - 2018) DESCRIPTION UNIT QTY RATE

Supplying, installation, testing &

commissioning of intelligent analog

1 17.2.4 addressable photothermal detector No 2 2858.00 5716.00

complete with mounting base complete as

Supplying, installation, testing &

commissioning of response indicator on

2 17.2.5 surface/recessed MS Box having two LED, No 2 276.00 552.00

metallic cover complete with all

connections etc as required.

Supplying, installation, testing &

commisssioning of intelligent addressable

programmable sounder complete as

Supplying, installation, testing &

4 17.2.7 commissioning of fault isolator complete No 2 3270.00 6540.00

with base as required.

Supplying, installation, testing &

commissioning of intelligent addressable

5 17.2.9 thermal detector with rate of rise cum fixed No 1 2726.00 2726.00

tempreature thermistor complete with

base as required.

Supplying, installation, testing &

6 17.2.10 commissioning of addressable fire control No 1 3003.00 3003.00

module complete as required

Digitally signed by AMIT

Supplying, installation, testing &

7 17.2.11 commissioning of addressable phone No 1 3267.00 3267.00

control module complete as required.

Supplying & laying of 2x1.5 sqmm fire

alarm armoured cable, 600/1000V rated

8 17.5.2 with annealed copper conductor having Mtr. 40 173.00 6920.00

XLPE insulation, steel wire armouring &

FRLS outer sheath complete as required

Supplying and drawing of cable Fire

Retardant PVC insulated copper

conductor cable in the existing surface /

recessed steel conduit of following pairs,

cores and size including connections and

interconnections etc. as required.

10 17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 20 89.00 1780.00

Supplying and fixing 25 mm dia MS

flexible pipe with PVC coating along with

all ancillaries and accessories like coupler

etc. as required.

Supplying & Fixing of battery operated

illiminated "EXIT" signage, with 2hrs

power Battery backup complete as

TOTAL FIRE ALARM WORKS DSR

Grand Total 38085.00

Grand Total 38085.00

Digitally signed by AMIT

Sr.No Work Station Infrastructure Unit QTY RATE AMOUNT

1 Linear Workstation Tables Customised Modular Type

Dimension : 1200mm(L) X 600mm(D) X 750mm (H) nos 18 21200.00 381600

Supplying and placing of workstation of non-sharing single unit

workstation table in completely knock down conditions with an

overall size 1200mm x 600mm that is to be assembled at site. The

work top shall have the size 1184mm x 592mm made up of

25mm thick pre- laminated particle board of grade II type III of is

12823/latest . of is level with approved laminate and finish as per

approved shade. the profile of the top shall be in rectangle shape

and the edges shall be sealed with 2mm thick thin strip of

impermeable pvc that is cut to fit the size of board panel and duly

pasted with the assistance of edge banding machine at 200 degree

celsius. the top trim, top bar, mid bar, vertical bar, raceway,cable

cubby, Power , ethernet, HDMI popbox fixing arrangement, skirting

shall be made up of aluminium extrusions (pre-treated) and duly

powder coated with polyester powder coating 40p-60p thick . the

trims shall have the size 67mm x 19mm with 1.5mm thick covered

with die cast end caps on joints 2 ways, 3 ways & 4 ways (l-cover

for corner, t-cover for middle section wherever required). the

aluminium raceway shall be situated below the worktop with

an overall size 116mm(h) x 60mm(d) with 1.4 mm cover

thickness and 2mm back thickness as per requirement of inlaying

the electrical management and carrying the wire horizontally. the

exposed vertical and horizontal faces of the frames shall be snap

fitted with trims. there shall be soft-board (with fabric) and

marker board provided at front of the user. laminated top tile and

bottom tile shall be situated at both sides of the user and below the

work top respectively. the partition shall have concealed wire

management capabilities and should be engaged for responsive

2 Medium back Chair nos 2 13120.00 26240

Digitally signed by AMIT

Supplying and placing in position of 360 degree Revolving medium

back chair of Dimension (W)585mm X (D)660mm X (H)1060mm as

per image . Ergonomically designed, it features a breathable mesh

backrest and adjustable lumbar support to provide you all-day

comfort. it offers Synchro Single Locking Mechanism along with a

Tilt Tension Control. The adjustable armrest provide deluxe comfort

while the strong chrome base . The 55mm castor wheels and a 360-

degree swivel provide swift yet stable movement.High-quality fabric

upholstery with high abrasion-resistance and superior tear strength

& colourfastness,Premium high-density virgin foam for comfortable

seating, High stability chair with no-tip over, clearing drop test of

102kgs,Adjustable Lumbar Support for superior back

support,Pneumatic Height Lift with Class IV gas lift,Adjustable

headrest with Synchro Single Locking and Tilt tension control for

improved mobility. Item Sizes may vary as per site requirement &

guidance under Engineer in charge.

Dimension: 22100mm(L) X 450mm(D) x 21200mm(H) nos 2 28362.00 56724

Supplying, and placing in position of medium height storage @

1200mm height as per photograph/drawing . The storage unit

having Openable shutters with shelf in it. The modular storage unit

top shall be made from 18 mm thick pre-laminated particle board

and rest of the sides as well as shelves and shutter to be made up

of 18 mm thick pre-laminated particle board while back to be made

of 8 mm thick pre-laminated particle board. All edges to be provided

with 2 mm thick PVC lipping. The storage unit having openable

shutters withD shape handles & locking arrangement.Item Sizes

may vary as per site requirement & guidance under Engineer in

Digitally signed by AMIT

Dimension : 2100mm(L) X 750mm(D) X 750mm(H) nos 2 45440.00 90880

Providing and placing in position of table as per image/drawing.

Customised Modular Table as per site conditions are made up of

25mm thick pre-laminated particle board and understructure shall

be made of 18mm thick prelaminated particle board gable ends and

modesty panels. The working edges shall be provided with machine

pressed 2mm thick PVC edging using special hot melt glue at hot

temperature.The table shall be provisioned with one shelf below

the top are made of 18mm thick prelaminated particle board with

PVC edges.Item Sizes may vary as per site requirement &

guidance under Engineer in charge.

Dimesnion:(W)500mm X (D)400mm X (H)450mm nos 2 8640.00 17280

Digitally signed by AMIT

Interactive Room Chairs : Supplying and placing in position of 360

degrees revolving medium back chair matching with h. The

breathable mesh back chair with cushioned fabric seat shall be

ergonomically design with adjustable lumbar back support . The

chair shall be provisioned with adjustable armrest (Up-Down) with

PP padding and Adjustable Headrest(Can Adjust Movement). The

seat cushion to be upholstered on 10-12mm thick water proof

plywood and moulded foam. The seat to be made with 12 mm thick

hot pressed BWR plywood (IS grade - 303) upholsetered with

6 Polyurethane foam and mesh fabric over it. The chair shall be Each 18 13200.00 237600

provided with self tension single locking mechanism and pneumatic

height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The

black Five star chrome base with hooded nylon castors..The

pneumatic height adjustment shall have adjustment stroke of 100

mm and shall be operated at 30kgs extension force.The Seat are

made up of 12mm thk hot pressed plywood upholstered with PVC

with polyurethane foam, chair seat has foam of density 32-35

kg/m3. Item Sizes may vary as per site requirement & guidance

under Engineer in charge.

Total 8,10,324

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: SIGNAGE

S No Description Unit Qty Unit price

1 RECEPTION 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters

raised 1.5 inches of required size and shape with

arrangement of screws in the letters itself for mounting on

the walls or pasting using 3M VHP Tape. Fixing complete

as per directions of the engineer. The Sizes would be

calculated in Sqmt as per Logo Design provided by client

2 NAME SIGNAGE

Providing sinages of SS (304) or acrylic as per required

size as desired by client Each 10 3,870.00 38700.00

TOTAL 78662.50

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: HORTICULTURE

S NO DESCRIPTION Unit Total Qty Rate Non DSR Amount Ref. Image

Round FRP Planter(LP9A-

Round FRP Planter (LP9B-

Plantation: Supply and

4 installaion of Natural Plant with Each 20 850.00 17,000.00

sand, fertilizer etc.

NET TOTAL 63,020.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

S NO DSR (E DESCRIPTION TOTAL TOTAL

& M- AMOUNT AMOUNT

UNIT QTY RATE

DSR (INR) NON-DSR

GI Gravity Louver

Supply, installation, testing and commissioning of GI

1.0 M.R. Gravity Louver complete with neoperene rubber gaskets,

nuts, bolts, screws linkages, flanges etc, as per

specifications.

2.0 VOLUME CONTROL DAMPER

Supply, Installation and Testing of GI box type volume

M.R. control dampers as per the specifications and shop

- For Rectangular Ducts

Insulated Flexible Duct

Supply, Installation, Testing and Balancing of flexible

ducting comprising of inner as well as outer skin

constructed out of aluminium & fibre glass insulation

25mm thick of minimum 24 kg/cu.m density insulation

sandwitched in between. Duct should confirm to fire rating

3.0 standards BS-476 part 5, 6 & 7.

Flexible Ducts of following sizes as per approved shop

MR drawings, specifications :

Universal (Jubilee) clamp should be provided to fix the

flexible duct in the spigots/Butterfly Dampers and covered

with aluminium tape. Circular clip with chain/GI threaded

rod to be provided to support the flexible duct.

Digitally signed by AMIT

Supply, Installation and Testing of single piece GI round

spigot made out of spinning process with 50mm height

4.0 and having grooves on both sides and circular flanges.

Spigots shall be installed on main ducts to facilitate

MR connection of flexible ducts.

Supply, Installation and Testing of Butterfly damper of GI

sheet construction with two flap with round flange on one

side and 10mm grove on other side for fixing of flexible

5.0 duct with the help of band, 20 Gauge Frame 250mm dia &

above, 22 Gauge Frame upto 200mm dia & 22 Gauge

MR Blade in all sizes as per the specifications and shop

Supply, installation, balancing and commissioning of

factory fabricated GSS sheet metal rectangular/ round

6.0 ducting complete with neoprene rubber gaskets, elbows,

splitter dampers, vanes, hangers, supports etc. as per

approved drawings and specifications of following sheet

thickness complete as required.

16.12.1. Thickness 0.63 mm sheet

16.12.1. Thickness 0.80 mm sheet

16.12.1. Thickness 1.00 mm sheet

Digitally signed by AMIT

16.12.1. Thickness 1.25 mm sheet

Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium

7.0 16.15 Supply Air Grills with aluminium volume control dampers SQM 0.5 9105.00 4552.50

as per specifications.

Supplying & fixing of powder coated extruded aluminium

8.0 16.16 Return Air Grills with louvers but without volume control SQM 0.5 5910.00 2955.00

dampers complete as required

Supplying, fixing testing commissioning of supply air

diffusers of powder coated aluminium with aluminium

volume control dampers with anti smudge ring &

removable core.

Supplying, fixing testing commissioning of Return air

diffusers of powder coated aluminium without volume

control dampers with anti smudge ring & removable core.

Supply, Installation, Testing of antivibration flexible joints

at the outlet of air handling units/ductable split units//inline

fans. Flexible connections shall be constructed using

imported fire retardant fabric with extruded aluminium

frame/flange on both sides of approved make.

Supplying and fixing of following thickness duly laminated

aluminum foil of mat finish closed cell Nitrile rubber (Class

"O") insulation on existing duct after applying suitable

12.0 16.23 adhesive for Nitrile rubber. The joints shall be sealed with

50 mm wide and 3 mm thick self adhesive nitrile rubber

tape insulation complete as per specifications and as

Digitally signed by AMIT

Supply and fixing of acoustic lining of supply air duct and

plenum with 25 mm thick resin bonded glass wool having

density of 32 kg/m³, with 25 mm X 25 mm GI section of

1.25 mm thick, at 600 mm centre to centre covered with

16.21 Reinforced Plastic tissue paper and 0.5 mm thick SQM 1.0 708.00 708.00

perforated aluminum sheet fixed to inside surface of ducts

with cadmium plated nuts, bolts, stick pins, CPRX

compound etc. complete as required and as per

Shifitng of Existing VRV/Water Cooled AC to designated

MR place including necesaary connections, gas,valves shifting Each 1 10000.00 10,000.00

14 Complete in all respects

TOTAL HVAC WORKS 38332.0 23490.0

Digitally signed by AMIT