SPL REPAIR/REPLACEMENT OF BER ITEMS, PROVN OF DG SET FOR HQ CWE NO-2, MEERUT CANTT AND INSTLN OF EARTHING AT EXERCISES DEPARTMENT OF CENTRAL MI ROOM (BLDG NO E-8) OF 322 FD HOSP UNDER AGE E/M-II

Amount

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix desert cooler electric driven single phase 230 Volt metallic body (GI) medium, having thicness 0.5mm capacity of water tank not less than 67 Ltr with heney comb cooling pads & 3 way speed setting airspeed control air throw 52 feet, 1440 RPM and power consumption not more than 240 watt, 50 Hz complete all as specified and directed .

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep heavy duty with, blades, and frame and louvers complete all as specified and directed.

Supply, install and testing of water heater vertical storage type capacity 25 ltr, 2 KW having stainless steel inner vessal with glass enamlled coating BEE, five star rating, closed/vented type 240 volt glass coated heating element complete with all accessories such as safety valve, thermostat, NRV, Connction piece etc including fixing arrangement with suitable size of fastner, nuts, bolt and washer etc making good to distrubed wall surfaces to match with existing complete all as specified and directed.

Supply and fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white/colour washing/distempering etc to match with existing disturbed surfaces complete all as specified and directed.

Material and labour for sub main wiring FRLS with 2x4.00 Sqmm nominal cross sectional area (two single core cable of 4.00 Sqmm for phase and neutral + o1 single core cable of 4 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4.00 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into & rigid non metallic PVC concealed conduit of 25mm dia medium grade with all accessories and connected to common earth dolly complete all as specified and directed. Note : One meter of 25mm dia non-metalic PVC conduit along with 2x4.00 sqmm wire and one 4.00 sqmm earth wire shall be measured as one RM length.)

Suply and fixing cast copper alloy stop cock 15mm dia fancy type chromium plated, screwed both end high pressure with handle complete all as specified and directed.

Supply and fixing 15mm dia unplasticised CPVC pipe of pressure rating 10 Kgf/Sqcm fixed complete all as specified and directed.

Supply and fixing bib taps cast copper alloy with crutch handle screwed down, screwed for iron pipe and fixed complete all as specified and directed.

Material and labour for cutting/chasing of existing GI pipe 15mm dia and fixing Gi short piece , elbow, sockets complete all as required at site complete all as specified and directed.

Supplying, installation, testing and commissioning of silent Diesel engine driven generating set of capacity 20KVA 415volts, 3 phase 4 wire engine as per IS: 10001 and IS:1002 and Alternator as per IS: 13346 and latest CPCB IV + norms and comlaint with including outdoor AMF panel complete with necessary foundation as per manufacturer recommendations, AVM pads , control panel with necessary meters and sound proof canopy complete all as specified and directed for the following specifications :- DIESEL ENGINE :- (i) Water cooled 3 x cylinder ( 20.5 BHP) developing suitable BHP @ 1500RPM. (ii) Engine shall be cooled by rail mounted, engine driven radiator of adequate capacity, with blower fan, fan guard, self regulated electronic governor,fan belts etc. (iii) The diesel engine shall be vertical, to run continuously at 1500 RPM confirming to IS 10002, BS-5514, standard with an overload capacity of 10% for one hour in every 12hrs of operation. (iv) Diesel engine shall comply with latest CPCB IV + norms. ALTERNATOR:- (i) Alternator 20 KVA, suitable to deliver rated output at 1500 RPM, 415V, 0.8 PF (LOG), 50HZ, 3 PH, in SPDP enclosure, self-excited & regulated electronic governor. (ii) The alternator shall conforms to IS-4722 & shall be suitable for tropical condition. (iii) Full load efficiency of the alternator offered should be above 90%, insulation and temperature rise also limited to class H. (iv) Enclosure shall conform to IP-23.

Supply, laying, commissioning and testing XLPE insulated, armored heavy duty electric cable with aluminum conductor, 1100 volts grade, cross sectional area 16 Sqmm 4 core complete with making connection including aluminium lugs , nuts and bolts of suitable size complete all as specified and directed.

M&L for earthing for DG Set complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground level with top edge of the earth plate not less than 1.5 meter deep below normal ground level, connected with & including galvanized iron strip of size 32x6mm connected to main test point as directed as earthing lead upto (7.5mtr) by means of nuts, bolts and washers of galvanized iron protected by 40mm dia (light grade) GI tubing, funnel, wire mesh 20mm bore GI tubing (medium grade) watering pipe, including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350x350x50mm including re-inforced with 8mm dia TMT bars @ 15cm C/C in both ways and 10mm dia MS handle (01 No) of suitable size for lifting of cover slab, charcoal and salt in alternate layers including necessary excavation and earth work in soft/loose soil all as shown in Electric plate No-3 of SSR part-I and testing on completion complete all as specified and directed.

Supply and fix on load change over switch 415 volt in sheet metal enclosure 4 pole of capacity 63 Amps complete all as specified and directed.

Material and labour for Cement concrete in foundatios, filling and mass concrete 1:2:4 (using 40mm graded stone aggregate) type B2 complete all as specified and directed.

Excavation in trenches not exceeding 1.5 meter in wide and exceeding 1.5 meter but not exceeding 1.5mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

Removing of excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed.

M&L for sand dry, filling in trenches around under ground cable complete all as specified and directed.

Supply / laying and fixing 50 mm bore galvanised steel tubes with all fittings, light grade, fixing on wall , under road for cable protection complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

Material & labour for earthing complete with copper earth plate electrode 60cmx60cmx 3.15mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with copper earth plate electrode 60cmx60cmx 3.15mm by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main test point including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 including duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover complete all as specified and directed.

Supply & fixing aluminium strip 25x3.15mm with saddle and fixing screw etc for roof conductor and dodw conductors above ground level complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing oncomplete all as specified and directed.

Manish Enterprises

Jain Traders

Rajneesh Jain

EX SOLDIERS MECHANICAL WORKS

SIDDHARTH TRADERS