REPAIR/REPLACEMENT OF LEGGINGS, JOINTS PIPELINES, ETC AT OMQ AND TECH AREA UNDER GE (AF) SRINAGAR

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying CI / DI / GI of pipes etc. and getting out in soft / loose soil, including trimming the sides and forming bottom surfaces to required levels complete all as specified and directed.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Disconnecting and taking up or down old unserviceable GI / MS tubing of following size from trenches / wall incl fittings etc complete all as specified and directed. ( Excavation and earthwork will be measured and paid separately)

40mm bore

25mm bore

20mm bore

15 mm bore

Supply & laying, jointing and testing galvanised water tubing, medium grade, including all GI fittings laid in trenches complete all as specified and directed of following bore. Note :- (i) Excavation & earthwork shall be measured & paid separately under appropriate item. (ii) All fittings required for laying / fixing shall be brought by the contrator and cost theise shall deemed to be included in the quoted rates.

40mm bore

25mm bore

20mm bore

15 mm bore

Fixing only old steel water tubing as retrieved from item No 4 here-in-before of following bore and connection in new or old position, complete all as specified and directed by Engineer-in-Charge

40 mm bore

25 mm bore

20 mm bore

15 mm bore

S&F mild steel GI tubes 20 mm bore 'medimum grade' with all fittings including clamps and fixed complete to walls and ceilings and making good to disturbed portion of wall complete all as specified and directed by Engineer-in-Charge.

M&L for Lagging to pipes 15mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg / Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

M&L for Lagging to pipes 20 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg / Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

M&L for Lagging to pipes 25 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg / Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

Disconnecting and taking down unserviceable gate valve any type of the following size etc complete all as specified and directed by Engr-in-charge .

40mm bore

25mm bore

20mm bore

15 mm bore

S&F Gun metal globe or gate valve full opening with iron wheel head, screwed both ends , heavy duty, ISI marked for iron pipe of following sizes complete all as specified and directed by Engr-in-charge.

40mm bore

25mm bore

20mm bore

15 mm bore

Supply and fix in repair 500 Liters capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform including all fitting such as connection pipe, pieces with GI tank nipple for inlet, outlet, washout and overflow etc. complete.

Taking down 15 mm bore galvanised iron water tubing medium grade and refixing the same after cleaning / removing the blockage including the provision of new fittings and fixtures complete all as specified and directed. Note :- All required T&P will be arranged by contractor for removing / refixing the GI tubing.

Taking down 20 mm bore galvanised iron water tubing medium grade and refixing the same after cleaning / removing the blockage including the provision of new fittings and fixtures complete all as specified and directed. Note :- All required T&P will be arranged by contractor for removing / refixing the GI tubing.

Taking down 25 mm bore galvanised iron water tubing medium grade and refixing the same after cleaning / removing the blockage including the provision of new fittings and fixtures complete all as specified and directed. Note :- All required T&P will be arranged by contractor for removing / refixing the GI tubing.

Supply and fix in repair brass ball valves,high pressure,with polythene float and flynut complete,screwed for iron pipe of size 15 mm bore.

Supply and fix in repair brass ball valves,high pressure,with polythene float and flynut complete,screwed for iron pipe of size 20 mm bore.

Supply only galvanised iron Union of size 15 mm

Supply only galvanised iron Union of size 20 mm

Supply only galvanised iron Union of size 25 mm

M/S Haji Zahoor Hussain Ganai

M/S NEW FAROOQ TRADERS