Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹28.8 LAccepted-AOC | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹32.3 L+₹2.5 L (8.20%)Rejected-AOC | L-2 | Rejected-AOC L-2 | |
| 3 | L-3₹36.8 L+₹6.9 L (23.1%)Rejected-AOC | L-3 | Rejected-AOC L-3 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
22 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I RND DELHI
MILITARY ENGINEER SERVICE, GARRISON ENGINEER (I) RND, LUCKNOW ROAD, TIMARPUR, DELHI-110054
REPAIRS MAINTENANCE TO EM INSTALLATIONS OF LAB AREA UNDER GE I RND DELHI
2024_MES_647766_1
GE/RND-118/DLI/2023-2024
Open Tender
Civil Works
Item Rate
180 days
Delhi
Class-D, Cat-a (i)
2 documents required · 2 mandatory
₹500
GE I RND DELHI
₹60,000
10 Sept 2024
23 Mar 2024
24 Jun 2024
23 Mar 2024
22 Jun 2024
8 Jun 2024
Amount
Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L rendering 15 mm thick in CM (1:4) on brick walls or concrete surface, surface finished even and fair without using extra cement complete all as specified and directed.
M&L for 10mm thick cement plaster on brick/concrete surface in CM 1:4 finished even and fair without using extra cement mixing with liquid WPC complete all as specified and directed. Note :-(i) Water proofing compound shall be paid separately (ii) Rate also includes necessary scaffolding to carry out work upto a height 15MTR.
M&L for rendering 15 mm thick in CM (1:6) on brick walls or concrete surface, surface finished even and fair without using extra cement complete all as specified and directed. Note:- (i) Rate also includes necessary scaffolding to carry out work upto a height 15MTR.
M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished even and fair without using extra cement as in ceiling, Chajja etc.complete all as specified.
Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved.
M & L Preparation of newly plastered surfaces of walls and apply two coats of oil bound distemper over a coat of 1mm wall care putty complete all as specified and directed.
M&L preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion apex paint (weather proof) of approved tint / shade(s) over and including one coat of water based alkali resistant primer complete all as specified and directed. Note:- (i) Rate also includes necessary scaffolding to carry out work upto a height 15MTR.
M&L Preparation of newly plastered outer wall surfaces and applying two coats of cement base paint. complete all as specified and directed.
M&L Preparation of newly plastered surfaces of Ceiling,chajja and applying three coats of white wash complete all as specified and directed.
M&L preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper(white or tinted) over a coat of alkali resistant primer complete all as specified and directed.
M&L preparation of newly plastered surface/ old plastered surfaces of wall and applying 2 mm thick wall care putty, to give an even finished smooth surface and preparing the surface for white wash /distemper /cement base paint/Apex paint etc complete all as specified and directed.
M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil emulsion distemper over 1mm thick coat of wall care putty of approved shade/tint complete all as specified & directed.
M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of ceiling incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil emulsion distemper of approved shade/tint complete all as specified & directed.
M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surface and applying two coat of acrylic exterior emulsion apex paint (weather proof) of approved tint / shade(s) over and including one coat of water based alkali resistant primer complete all as specified and directed. Note:- (i) Rate also includes necessary scaffolding to carry out work upto a height 15MTR.
M&L for applying two coat of synthetic enamel paint over old painted wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.
M&L for applying two coat of synthetic enamel paint over old painted steel surfaces of any descripition over 10cm width or girth including preparation of old surfaces complete all as spd and as directed
M&L for applying two coats of French polishing on old surfaces of any description, width or girth including preparation of surfaces complete all as spd and as directed
S&F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) triple layered hoisted and fixed in position 500 ltrs capacity including dismantling old water tanks and removing away from site and disconnecting and refixing the GI pipe and fittings complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) triple layered hoisted and fixed in position 1000 ltrs capacity including dismantling old water tanks and removing away from site and disconnecting and refixing the GI pipe and fittings complete all as specified and directed.
S&F in repair 15 mm dia GI steel tubing medium grade galvanised with all new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repair GI steel tubing medium grade galvanised 20mm dia with all new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repair 20mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threadedp o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.
All as per Srl item No-23.00 here-in-before but 25mm outer dia.
Making connection of PP-R distribution branch with PP-R main of sizes 16 to 40mm outer dia of pipe by providing and fixing tee including cutting and making fusion joint etc.complete all as specified and directed.
S&F in repairs PPR gate valve of outer dia 25mm outer dia valves (brass insert) as per requirement of the site complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and directed.
S&F in repair PVC valve less 10ltrs capacity syphonic action type flushing cistern low level white with inlet ball valve float and handle push type including flush pipe 32mm dia and connection to WC complete all as specified and as directed
Supply and fixing as in repair vitreous china squatting pan "Orissa" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) incl Plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed.
S&F in repair wash hand basins, white colour,vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe,waste coupling etc complete all as specified and directed.
M&L in repairs 75mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete B-1, (1:2:4) complete all as specified and directed.
S&F in repair Toilet paper holder vitreous china box type fixed to wall with CP brass screw complete all as specified and directed.
S&F in repair plastic water closet seat white closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.
S&F in repair mild steel CP grating 100mm/125 mm dia with or without hole for waste pipe fixed on floor / nahani trap fixed with cement mortar complete all as specified and directed.
S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber led joint fixed to wall complete all as specified and directed.
S&F PVC (SWR) 110mm dia bends complete all as specified and directed.
S&F in repairs PVC connections 15mm dia & 450mm long with PTMT nuts complete all as specified and directed.
S&F in repairs chromium plated brass shower rose 125mm dia with swivel joint complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame)n.exc 1.5sqm and making good to distrubed surface without any extra cost complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exc 1.5sqm but n.exc 4 Sqm and making good to distrubed surface without any extra cost complete all as specified and directed.
Taking down shutters exc 1.00 sqm but n.exc 2.00 Sqm each complete all as specified and directed.
S & F pressed steel frames for doors with one or more rebates of size 105x60 mm including necessary fixing lugs, lock strike plate etc complete made out of 1.25 mm thick MS sheet complete all as specified and directed.
S & F pressed steel frames for doors with one or more rebates of size 125x60 mm including necessary fixing lugs, lock strike plate etc complete made out of 1.25 mm thick MS sheet complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 (12.5mm graded stone aggregate for filling of Pressed steel frame etc, rounded or chamfered on edges complete as specified, supplied and fixed complete all as specified and directed.
S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and directed.
S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and directed.
S&F 35mm thick 2nd class hard wood glazed and skelton door shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc sizes of member as spd in SSR Part I sec 8 clause 8.20 (a) complete all as specified and directed.
M&L for applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any descripition over 10cm width or girth including preparation of surfaces complete all as specified and directed.
S & F factory made solid PVC door frame size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and directed.
S&F Factory Made Solid Panel PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face with particle board core supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S & F factory made solid pannel PVC door shutter 30mm the style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gap insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per specification and directed.
S & F stainless steel butt hinges 100 mm long complete all as specified and directed.
S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed,type B-21 complete all as specified and directed.
S&F 150 mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.
S&F 250mm long aluminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.
S&F 150mm size aluminum handles cast type, anodized complete all as specified and directed.
S&F in repair 200 mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.
S&F in repair 250mm long aluminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.
S&F in repair 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F in repair mild steel dead lock of size 50mm to100mm, vertical type with 2 levers suitable for aluminium door shutters complete all as specified and directed.
S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc complete all as specified and directed.
S&F in repairs floor door stopper of aluminium alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140mm complete all as specified and directed.
S&F in repair 20mm dia MS CP curtain rods with fixing brackets, stops etc complete all as specified and directed
S&F in repair MS case ment stay size 300mm with hinged joint and two plates with studs complete all as specified and directed.
S&F in repair aluminium anodised fully glazed partly panelled partitions and fixed glazing made out of anodized aluminium section 63.50x 38.10 x 1.60mm including necessary jointing cleats glazing clips, rubber packing anodised aluminium snap beading screws etc, frame work fixed to walls , floor and ceiling with rawl plug wherever required complete all as secified and as directed. Note : 1. Sheet glass and particle board shall be measured and paid for separately 2. Area of each panel shall not be exc 01 sqm
S&F Powder Coated(minimum thickness of powder coating 50 micron) aluminium frame for doors,windows,ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F anodised aluminium Powder coating door shutters aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron) including necessary jointing cleats, glazing clips, ruber neoprene packing , hinges, anodised aluminium snap beading screws,all necessary builders hardware etc complete all as specified and directed.
S&F in repairs Powder Coated(minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.
S&F in repairs Powder Coated(minimum thickness of powder coating 50 micron)aluminium window and ventilator shutters(wire mesh shutter and glaze shutter), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 4 mm thick sheet glass in squares/rectangle exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc)including hacking out old glasses upto a height upto 15mtr including necessary steel/wooden scaffolding etc complete all as specified and directed.
S&F 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc)including hacking out old glasses upto a height upto 15mtr including necessary steel/wooden scaffolding etc complete all as specified and directed.
S&F in repair 4 mm thick sheet, figured glass, pin head type and glazing with oil putty in squares not exc 0.50 sqm in each pane complete all as specified and directed.
S&F 12.00 mm thick particle board with decorative choice lamination prelaminated both sides of approved shades fixed to aluminium shutters/ partitions complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.
M&L for Coloured joint free Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.
M & L non skid coloured tiles 400mm X 400mm X 7mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick cement screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M&L for Glazed colour ceramic tiles in vertical surface 450 X 300 X 7mm thick set and jointed in neat cement slurry over and including 10 mm thick rendering in CM 1:4 and pointed in white or colour cement to match the shade of tile complete all as specified and directed.
M&L for light shade coloured vitrified tiles of any design and pattern (600x600mm size) 8 to 9 mm thick polished, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.
M&L for prepolished coloured chequred cement concrete tiles 300X300X20 to 25 mm thick size set in screed bed 20 mm thick in cement mortar 1:4 including necessary PCC coping of size and thickness as specified using PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate around the chequered tiles complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar or laid dry complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
M&L for machine cut kota stone slab flooring 18 to 20 mm thick in staircase riser/treads/skirting dado etc laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for Granite stone 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plat forms and like in cement mortor (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
M&L machine cut Granite slab 15 mm thick for steps, pillars, skirting/dado, window cills, cooking plat forms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as specified and directed. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd.
M&L for rubber moulded prepolished coloured precast concrete interlocking paver block 60mm thick of any shape and size with grey cement and pigment confirming to IS 15658-2006 M-35 Grade, complete all as specified and directed.
M&L Sand filling under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
M&L brick work with sub class B old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and directed.
S&F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A complete all as specified and directed.
S & F Framed work as in Mild Steel Gate of angle or other section with gusset plate, rails, braces, stair case, barred iron doors,ladders; framed balusters; walk ways; railings; framework of water tanks, cover grills and similar work etc Fe.290.Gde-E-165 complete drilled for fixing of steel sheeting or other covering including welding work etc to be prepared for hanging or sliding with and including either hooks,hinges,necessary holdfasts or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing in building upto 8 mtr height complete all as specified and directed.
S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.
M&L preparation of new steel & iron surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide/zinc chrome primer complete all as specified and directed.
Dismantling Asbestos corrugated & Semicorrugated etc sheetin in roof covering of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F in repair 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L-type or J-type or cranked bolts and washer in roof and wall etc complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.
M&L PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundations,filling, mass concrete,Subbase complete all as specified and directed
M&L for 75mm thick PCC ,1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base concrete all as specified & directed.
M&L 75mm thick PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection,subbase etc complete all as specified and directed.
Removing building materials etc.to a distance of upto 20 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.
Complete removal of existing roof treatment including brick tile, mud fusca,PCC padding,cowa, lime concrete etc up to any thickness and depth of original roof slab and Cleaning up to existing RCC roof by steel wire brushes and surface washed with clean water and complete all as specified and directed. Note: All Demolished material / mud phuska sand/ brick tiles will be removed by the contractor out side of the Defence land exc 5 km but not exc 20 km. The cost shall deemed to be included in quoted rates.
M&L PCC 1:3:6 type C1(using 20 mm graded stone aggregate) as in mass concrete over roof as in padding incl cement slurry over old RCC surface, surface fair finished even & smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering on roof surfaces in cement mortar (1 : 4) using with WPC finishes the surface even and smooth without using extra cement complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separately
M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.30 Kg/Sqm complete all as specified and directed.
M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces complete all as specified and directed. Note :1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat will be paid seperately.
M & L 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. Note: Application of APP membrane must be done by authorised applicator of membrane manufacturer.
M&L for applying two coats of bitumen based aluminium painting on water proofing treatment with preparation of surface as on non accessible area complete all as specified and directed.
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified. Note:1. Rate also includes necessary scaffolding to carry out stone grit plaster work upto a height G+7 floor Including taking down existing grit plaster and using white cement in place of grey cement for grit wash. 2. Payment for providing grooves as specified shall be also includes in quoted rates.
M&L for clearing away all grass, cleaning/brooming to terrace floor, vegetation, saplings, shrubs, brushwood, undergrowth, digging out roots, filling holes and levelling ground, and removing rubbish outside the MoD periphery of the area under clearance upto a distance of 10KM complete all as specified and directed. Notes :-(a) The cleaning of grass/vegitable/brushed growing to be cleaned upto 7 (Seven) storey and making good with PCC 1:2:4 type B1 and finishing the surface to match the exisitng surface complete all as spceified and directed by Engr-in-Change. (b) Rate also includes necessary scaffolding, tools & plants to carry out the job upto a height G+7 floor. (c) The rate includes necessary cleaning of floor/tiles, doors/window incldung glass panes after complete of painting (d) Rate also includes necessary scaffolding, tools & plants to carry out the work/job upto a height G+7 floor.
M&L for repairing of spalled concrete from RCC surfaces (such as ceiling, beams, coloumns, parapets, chajjas etc) in the following stage :- (a) Preparation of existing surfaces like chipping of unsound weak/loose concrete with electric hammer or manually including tapping all edges, making square shoulder of cavities etc not exceeding 50mm thickness, including removal of cebrises complete all as specified and directed. (b) Applying rust remover cum passivators Sika rust off 100@ 0.20 Kg/Sqm in each coat as per manufacturer instructions to remove rust from existing reinforcement (Make :- Sika/Fosroc/Asian Paint). (c) Applying a epoxy base Zinc rich rebar corrison protection system of product Frianzic(R) @ 0.15kg/Sqm in each coat as per manufacturer instruction. (d) Mixing and applying two components epoxy resin concrete bonding coat of Sikadur R&B-42 @ 0.10 Kg/Sqm (Mixing Proporation as per manufacturers instruction) including preparation of surfaces by chipping and thoroughly cleaning of surfaces complete wherever required over new reinforcement (if required) and as directed. (Make : Sila/Fosroc/Asian Paint) Applying two layers of guniting over steel welded mesh 2mm dia of wire and aderture 75mm total thickness of guniting not exceeding 40mm (Avg thickness) in CM 1:2 using OPC 53 grade cement mixing with polycerate mixture 2% by weight of cement or as per manufacturer instruction. (e) Applying a prebached one component polymer modified cementious patch repair morter not exceeding 50mm in layers of 15mm thick each product Sika mono Top @ F as per manufacturer instruction to match the existing surfaces as in sides and soffits etc of slabs, chajjas, fins, facias, parapets, lintels, colum and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC membrance at any height upto G+6 storey buildings including removal of all small tress/shurbs etc complete all as specified and directed. Note : Rate also includes necessary scaffolding to carry out work upto a height G+6 floor.
Taking down and adjusting / repairing of steel window shutters for smooth opening/closing including greasing, welding and adjustment of projecting type friction hinges in any position to make fully functioning and refixing in same position including making good the distrubed surface complete all as specified and directed.
S&F in repair Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indi?cated, complete: push pull or manual type lath thickness 1.25mm complete all as specified and directed.
S&F solid PVC wall lining/panelling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site over and including PVC frame as per specification and drawing including taking down existing wall boarding complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
S&F for Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including taking old collapsible door ,complete all as specified and directed
S&F in repair vertical veniation blind consisting of aluminium head rail, vanes/louvers 4” wide of approved tint and traverse cord complete fixed in position complete all as specified and directed.
S&F in repairs Viterious China urinals, bowl type(back or corner wall type) ofsize 465X355X265 mm,complete including providing and fixing plugs,bedding urinal against wall in Cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws,pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe,grating and Union for discharge pipe. complete all as specified and directed.
S&F in repair sensor kit with battery suitable for sensor type urinal pot of required size for proper functioning complete all as specified and directed.
S&F in repairs vitreous china Urinal, Half stall type white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified and directed.
S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimun weight 60 gms) complete all as specified and directed.
S&F in repair PVC internal syphone kit with handle suitable for low level flushing cistern having10 ltrs capacity, white, valveless, syphonic action type complete all as specified.
S&F in repair flush pipe/L bend for PVC low level flushing cistern as suitable for EWC/ Orissa pattern pan including jointing to WC complete all as specified and directed.
S&F in repair soap dish chromium plated of size 100 x 100 mm any type, fixed with chromium plated brass screws complete all as specified.
S&F in repairs 15mm bore pillar tap long neck,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure,with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.
S&F long body Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
S&F angle stop valve, cast copper alloy chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
S&F in repairs 15 mm dia stop valve concealed type cast copper alloy screwed down high pressure chromium plated with long shank including dismantling porting of the wall as required including making good to match with existing surface complete all as specified and directed.
S&F in repair 15mm dia ball valve high pressure of PTMT complete with aluminum rod and polyplast ball complete all as specified and directed.
S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe, complete all as specified and directed.
S&F in repair chromium plated waste coupling fitting 100mm / 75mm bore pipes to kitchen sinks complete all as specified and directed.
S&F in repair 32mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed complete all as specified and directed.
S&F in repair 40mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed complete all as specified and directed.
S&F in repair 32mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed.
S&F in repair 40mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed.
S&F in repair brass CP Health faucet with 1.50 Mtr flexible chromium plated tube and hook fixed to angle valve 15mm bore with accessories complete all as specified and directed.
S&F in repair brass Chromium plated jet spray with CP connection pipe for EWC, 15mm bore with fittings, complete all as specified and directed.
Supply and fixing in repair brass chromium plated tubular towel ring having dia of ring not less than 150mm fixed to walls with necessary screwscomplete all as specified and directed.
S&F in repairs CP brass bottle trap 32 mm dia including joining to waste fitting and waste pipe complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if equired ) for repairs ,cleaning,etc.and hoisting if required reconnecting and refixing in position including cleaning and removing all scales and dirt from tanks and from mouths of circulating pipe etc for 250 ltr to 500 ltrs capacity of tanks complete all as specified and directed.
All as per Srl Item No 143.00 above but exc 500 ltrs and not exc 1000 ltrs complete all as specified and directed.
M&L for PCC type B1 1:2:4 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apexstone, bed plates, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L for Precast cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cover slabs of manholes, gully traps etc set in cement mortar (1:4) complete all as specified and directed.
Taking down and Adjusting / repairing of Aluminium door/windows shutters, for easy closing/opening tightning of hinges or changing the position of hinges, tighetning of Glass/ Particle board by replacing rubber beading and clip packing, adjustments of floor machine for smooth opening and closing and refixing the same complete all as specified and directed.
S&F as in repair aluminium alloy body floor door stopper of size 75mm having double round legs for better grip ,with rubber base fixed to door shutters with countersunk screws complete all as specified and directed.
M&L securing glass of any description in existing steel frame with putty including removing of old putty complete all as specified and directed.
S&F in repair 100 mm MS Butt hinges medium weight cold rolled. complete all as specified and directed.
S&F in repair 75 mm MS Butt hinges medium weight cold rolled. complete all as specified and directed.
S&F in repair 100 mm long aluminium handles, cast type anodied for alluminum windows complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.
S&F in repair 5.5mm thick sheet glass of any colour, ordinary quality and glazing with snap beading and gasket, neoprene packing etc. for aluminium door & window exc 0.5 Sqm in each pane. complete all as specified and directed.
Taking down and refixing of PVC door shutter (after taking down) loosened at joints of styles, by let in for making good and where hinges etc have been removed/loosened from chowkhets or frames and easing etc for complete functional of door complete all as specified and directed.
S&F in repair door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stailess steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete complete all as specified and directed.
S&F in repair mortice lock, verticle type of brass complete size 100mm and 4 levers complete all as specified and directed.
S&F 50 micron thick podwer coated aluminium grill 6x 45mm thick section 10cm center to center spacing complete with U-channel all around fixed in windows with screws complete all as per specified and as directed.
S&F 4.8mm thick sheet glass ordinary quality in Squre/rectangle exc 0.5 sqm each pane coloured and fixed with glazing pins and rubber beading etc in aluminium door/partition etc complete all as specified and directed.
S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, fixed as in repair complete all as specified.
S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified.
Dismantling boarding, any description, fixed in any positioin with nails complete all as specified
S & F Anodised aluminium snap grid frame work for false ceiling complete all as specified
S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
M & L for 8mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid ccomplete all as specified and directed.
Complete removal of existing roof treatment in up to depth of original roof slab and removing entire rbbish off the premises, and applying Water proofing treatmnet as under:- (a) Rendering 10mm thick in CM(1:4) mixed with water proofing compound @3% by weight of cement. (b) Applying a coat of approved bituminious primer @0.25 ltr/Sqm and allow to dry. (c) Applying one coat of hot blown bitumen grade 85/[email protected]/Sqm. (d) Supplying and laying polymeric APP water proofing membrane of weight not less than 3Kg/Sqm (e) Applying a coats of solar reflective bituminious aluminium paint @0.15 kg/sqm over the memberane complete all as specefied and directed.
SAWARIYA ENGINEERS AND CONTRACTORS
V.V CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .