RECONSTRUCTION OF SERVICE ROAD OF KISHANPUR PUMP CANAL FROM KM. 0.000 TO KM. 3.060

Amount

Scarifying the existing bituminous road surface and level the surface as per technical Specification clause 301.4

'Construction of embankment/Patari with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Providing, laying, spreading and compacting stone aggregates of 53 mm to 22.4 mm @ 0.91 cum per 10 sqm for compacted thickness of 75 mm and Stone Dust (Dust Shankargarh) @ 0.18 cum per 10 sqm (WBM G -3) Shankargarh Stone to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, a MORD Specific - ations 405.3 ( for pot Holes and undulation filling)

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and Laying tack coat with bitumen VG-10 Grade using bitumen pressure distributor @ 0.30 kg per sqm on the prepared granular surfaces and cleaned with broom as per Technical Specification Clause 503

Providing, laying and rolling of open-graded premix Surfacing of 20mm thickenss composed of Crushed stone grit, 13.2 mm & 11.20 mm @ 0.27 cum per 10 sqm (13.2mm @ 0.18cum and 11.2 @ 0.09 cum aggregate using Viscosity grade bitumen VG-10 to required line, grade and level to serve as wearinig course on a perviously prepared base Including mixig in a suitable plant laying and rolling with a smooth wheeled roller 8-10 tonne capaciry finished to required level and grade.

Providing and Laying Seal coat with Crushed Stone chipping of 6.7 mm size 100% passing 11.2 mm sieve and retained on 2.36 mm sieve applied @ 0.09 cum per 10 Sqm, for Sealing the voids in bituminous surface (20mm Primix Carpet) laid to the specified levels, grade and cross fail using Type-C Seal coat.

Brick Edging 8 cm wide on both side of Road by M-150 Brick complete as per PWD specification no 20.15

M/S CHANDRA SHEKHAR SINGH

M/S SHIVA CONSTRUCTION AND SUPPLIERS

C.L. CONTRACTORS

M/S MAA SHAKTI CONSTRUCTION