PROVIDING AND FIXING OF SANITARY FITTINGS, ELECTRICAL FITINGS AND ALLIED WORKS AT MALI HUT AT FRUIT PLANT NURSERY MACHEDDI PYT. MACHEDDI BLOCK LOHAI MALHAR SCHEME CAPEX BUDGET

Amount

Providing and fixing G.I pipes complete G.I fittings and clamps including cutting and making the walls etc. internal work exposed on wall.

15mm dia nominal bore

20mm dia nominal bore

Providing and fixing G.I union in G.I pipes including cutting and threading the pipes and making long screws etc. complete (new work)

15mm dia nominal bore

20mm dia nominal bore

Providing and fixing white vitrous china pedestal type water closet ( European type wc pan) with seat and lid ,10 litre low level pipe with PVC flushing cistern including flush type with manually controlled device conforming to IS:7231 with all fittings and fixures, complete including cutting and making good the walls and floors where ever required.(make cera/equivalent)

Providing and fixing wash basin with C.I /M.S brackets 15mm C.P bras pillar taps , 32mm C.P bras waste of standard pattern , including Painting of fittings and brackets , cutting and making the good walls wherever . white vitrerous China . size wash basin 630x450mm with pair of 15mm c.p brass pillar tap .(make cera/equivalent)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipe and fitting.(make cera/equivalent)

Providing and fixing stainless steel A ISI 304 (1818) kitchen sink 610x510mm bowl below 200mm depth including all types of fitting ( complete job)

Providing and fixing 600x450mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board .ground fixed to wo0den cleats with C.P bras screws and washer complete

Providing and fixing ball valve ( brass) of approved quality complete high or low pressure with plastic floats

15mm dia nominal bore

20mm dia nominal bore

Providing and fixing soap dish of approved quality

Providing and fixing PTMP towel ring trapezoidal shape 215mm long 200 mm wide with a minimum distance of 37mm from wall face with concealed fittings arrangements of approved quality and colour , weighing not less than 80 gram.

Providing and fixing PTMT grating of approved grating of approved quality and colour . circular type 100 mm dia without waste pipe 125mm nominal dia with 25mm waste hole

100 mm dia without waste pipe

125mm nominal dia with 25mm waste hole

Providing and fixing of C.P brass shower rose with 15or 20 mm inlet 100 mm diameter complete job . (make jaquae/cera/equivalent)

Providing and fixing cp bib cock of approved quality 15mm nominal bore complete job(make jaquar/cera/equivalent)

Long nose

Short nose

Providing and fixing C.P brass angle valve For basin mixer and gyser points of approved make confirming to IS:8931. 15mm nominal bore complete job .

Providing and fixing 110mm dia. PVC waste water / sewerage pipe of 4 kg pressure per sqm of supreme / prince/ finoeix make prakash surya

Providing and fixing in position complete PVC floor trap 0f supreme / prince make 110/75mm dia.

P/Fixing plain PVC bend of 110 mm dia

P/Fixing PVC soil waste pipe and vent pipes 75mmdia

P/Fixing PVC connections (hot and cold) for gyser unions complete.

Constructing brick masonry manhole in cement motor 1:4 ( 1 cement : 4 coarse sand ) RCC top slab with 1:2:4 mix foundation concrete 1:4:8 mix inside plastering 12mm thick with cement mortar 1:3 mix finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix finished with a floating coat neat complete as per standard design. Inside size 90x80 cm and 45cm deep including providing and fixing in position pre cost RCC manhole cover and frame of required shape approved quality. LD -2.5 rectangular shape 600x450mm internal dimensions. With F.P.S bricks class desgnation. 75 with stone aggregate including all leads , lifts and all types of carriages

Providing and fixing unplasticised PVC connection pipe with brass union 30cm length 15mm nominal bore

Providing and placing on terrace on all floor levels polythene water storage tank ISI;12701 marked indicating the bis no with cover and suitable locking arrangements and making the necessary holes for inlet, outlet and overflow pipes including fitting and the base port for tanks syntax , electroplast , star , lotus, or equivalent having ISI make .

Providing and fixing 40 litre capacity gyser of jaquar ,mark,bajaj,or equivalent make all fittings including angle valve(complete job)

Providing and fixing Motor pump of ½ HP of sharp ,bajaj,or equivalent make including fittings (complete job)

Providing and fixing 1st quality ceramic floor tiles \ conforming to IS:15622 of approved brand make in all colors ,shades excepy burgundy,bottle green,black of any sizeas approved by engineer in charge in skirting,riser of steps and dados over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3 kg /sqm including pointing in white cement mixed with pigment of matching shade complete. (anti skit tile) Steps TREAD18x3.5x.83=52.29 Steps RISER18x3.5x.66=41.58 LANDING7x5=35 Net qty=128.87 sft

Providing and fixing of 600x120x5 mm glass shelf with edges round off supported on aluminium angle frame with cp brass brackets and guard rail complete fixed with 40 mm long screws etc make jaquar/cera

Providing and fixing toilet paper holder vitrous china Cp brass make jaquar/cera

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and color 450 mm long towel rail with total length of 495 mm ,78 mm wide and effective height 88 mm , weighing not less than 170 gms.

Providing and fixing PVC waste pipe for sink or wash basin Including PVC waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing 8 mm dia cp/ss jet with flexible tube upto 1 mtr long with ss triangular plate to eoropean type WC of aaproved quality and make as desired by engineer in charge.

Providing and fixing gI inlet conection for flush pipe connecting with Wc pan.

Providing and fixing MS holder bat clamp of total bracket length 580 mm of approved shape and design. Complete job

Providing and fixing cp brass extension nipple of approved brand and make as per direction of engineer in charge.

Cutting holes up to 30x30 cm in walls including making good the same with common burnt clay bricks

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing GI pipe etc

Wiring for light point/fan point/exhaust point/with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class pvc conduit with paino type switch ,phenolic,laminated sheet,suitable size ms box, and earthing the point with 1.5 sq mm ,FRLS pvc insulated copper conductor sigle core cable etc required. (wire make ISI marked havells/anchor/HPl) Group c

Wiring for circuit /sub main wiring along with earth wire with the following sizes of FRLS PVC isulated copper conductor ,single core cable,in surface /recessed medium class PVC conduit as required. ( Wire make ISI markedShalimar/ Havells/Anchor/HPL

A. 2x1.5+1x1 sq mm

B. 2x2.5+1x2.5 sq m

C. 4x4+2x4 sq m

Supplying and fixing of metal box of following size on the surface /recess with suitable size of phenolic laminated sheet cover in front including painting etc as required

A.200 x125x60 mm deep

B.200x250x100 mm deep

Supply and fixing paino type switch on the existing switch box or cover including connections as required 15/16 AMP Make havells/HPL/Anchor(power switch)

Supply and fixing 6 pin 15/16 amp socket outlet on the existing switch box or cover including connections as required (power socket) Make havells/HPL/Anchor

Supply and fixing 5/6 amp piano type switch on the existing switch box or cover including connection required. (Make Havells/HPL/Anchor)

Supply and fixing 3 pin 5/6 amp socket outlet on the existing switch box or cover including connection as required. (Make Havells/HPL/anchor)

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubic panel board including drilling holes in cubic panel ,making connections as required including enclose if required. Make Havells/HPL/Crompton/IA/Hager) 100 AMP 16 KA TP (Main switch)

Earthing with copper plate 600x600x3 mm thick including accessories and providing masonary enclosure with coverplate having locking arrangement and watering pipe of 2.7 mtr long with charcoal / coke and salt as required.complete job

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required

Providing and fixing of exhaust fan with all connections required. Complete job

Providing and fixing ceiling fan including regulator of approved ISI make as per required (havells/Anchor)

Supply and fixing 5 A to 32 A rating ,240/415 v,10 Ka C curve ,miniature circuit breakable suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commisioning etc as required .

Single pole

Single pole and neutral

Supplying and fixing following way, and pole plain /horizontal typesheet steel MCB distribution board,415 V on surface/recess, complete with tinned copper bus bar,neutral bus bar,earth bar.din bar,interconnections,powder painted as required. 6 way ,Double door 415 v ,3 phase and neutral DD

Supply of LED battens 4 feet 18 to 22 watt ,230 volts LED batten type tube light fitting complete job. Make surya/havells/bajaj/HPL/phillips

P/Fixing of door bell ding dong type. Make Anchor/Bajaj

P/Fixing of following ratings 230 volts energy saver led lamps. (Make Phillips/havells/bajaj/surya/HPL) A. 8 to 12 watt led lamp

Supplying and fixing 25 mm sq 2 core aluminium cable as required

Making khuras 45 by 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 over pvc sheet 1 mm by 1 mm by 400 micron finished with 12 mm cement plaster 1:3 and a coat of neat cement ,rounding the edges and making and finishing the outlet complete.

Painting top of roof with residual type petroleum 80/100 at 17 kg/10sqm impregnated with a coat of course sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete including all types of carriages. 1x36x32=1152.00 sft 1x26x8=208.00 sft Total=1360.00 sft

10mm thick average mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa of 35 kg per cum of gobari leaping with 1 clay;1 cow dung;and covered with fps brick tiles of class designation 100 grouted with cement mortar 1 cement :3 fine sand mortar mixed with 2 % of integral water proofing compound by weight of cement and finished neat including all types of carriages.Qty vide item no 52

Providing gola 75 by 75 mm in1 cement :2 course sand:4 stone aggregate 10 mm down gauge including finishing with 1cement :3 fine sand mortar in 75 by 75 mm deep chase including all typr of carriages. 1x200.00=200.00 rft

Providing and fixing gang saw cut mirror polished premoulded and pre polished machine cut for kitchen ,platforms,vanity counters,window sills and similar situations of required size, appoved shade , colour ,and textue laid over 20mm thick base cement motar 1:4 mix joints treated with white cement mix with matching pigment epoxy touchups,including rubbing curbing moulding and polishing to edges to give high glass fix etc complete at all levels Granite of any colour and shade area of slab over .5 sqm 1x 10.0x2.25=22.5sfT

Providing and laying cement concrete in 1:3:6 using 20 mm aggregate .all works upto plinth level. 1x65.00x1.0x.75=48.75 D/d 1x65.00x.78x.37x.37=6.94- Net qty=41.8

Steel work in built up sections fixed with or without connecting plate including cutting,hoisting,fixing in position including priming coat of approved steel primer all complete(water tank pedestal) MATERIAL STATEMENT ITEM QTY CEMENT SAND BAJRI TILES 22 11.97 2.87 .3 53 126.39 9.91 2.52 4297 54 60.97 3.78 4.36 9.04 55 2.09 .41 .05 6 1.18 5.19 .54 1.06 TOTAL 22BAG 7.67 10.22 4297

Carriage of sand/bajri from local nallah by HL/At=8 km(Avg)

KARAN SINGH

Swarn Singh