REPAIR REPLACEMENT OF CORRODED WATER PIPE LINE AT BP LINE MATCALE COLONY MP LINE KB LINE MALL ROAD 411 OFC 801 TA BN EAST SIDE AND AMAR SINGH CAMP UNDER AGE E M W OF GE W AGRA

Amount

Excavation in trenches in soft/loose soil, n. exc. 1.5 M wide and n.exc 1.5 M in depth, to required level and gradient for laying of pipe etc and getting out complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick in soft/loose soil complete all as specified and directed

Removing excavated materials (soft/loose soil) to a distance n.exc. 50 M and depositing where directed at a level n.exc. 1.5 M above the starting point complete all as specified and directed

Taking up or down for 100mm bore old steel tubing and connections complete all as specified & directed.

All as per item No-4 above but 80mm bore.

All as per item No-4 above but 50mm bore.

All as per item No-4 above but 40mm bore.

All as per item No-4 above but 25mm bore.

All as per item No-4 above but 20mm bore.

Refixing/relaying for the 100 mm bores old steel tubing in new or old position including new ISI GI fittings after cleaning by suitable chemical, roding, cutting to required length, screwing ends etc. as per site requirement complete including existing connection with required size of Tee or MS clamp with rubber bush all as specified and directed. Note: GI pipe retrieved from item No. 4 here-in-before shall be used after cleaning.

All as per item No-10 above but 80mm bore. Note: GI pipe retrieved from item No. 5 above shall be used after cleaning.

All as per item No-10 above but 50mm bore. Note: GI pipe retrieved from item No. 6 above shall be used after cleaning.

All as per item No-10 above but 40mm bore. Note: GI pipe retrieved from item No. 7 above shall be used after cleaning.

All as per item No-10 above but 25mm bore. Note: GI pipe retrieved from item No. 8 above shall be used after cleaning.

All as per item No-10 above but 20mm bore. Note: GI pipe retrieved from item No. 9 above shall be used after cleaning.

Supply, laying and jointing for the 100mm bore in trenches/on floor/wall, galvanized steel tubing medium grade including ISI marked GI fittings, including cutting to reducing length, screwing and connecting with existing line including fix existing connection with required size of Tee or MS clamp with rubber bush complete all as specified and directed

All as per item No-16 above but 80mm bore.

All as per item No-16 above but 50mm bore.

All as per item No-16 above but 40mm bore.

All as per item No-16 above but 25mm bore.

All as per item No-16 above but 20mm bore.

Taking up/down 100mm bore of cast iron/ductile iron water mains(including all fittings), with spigot and socket ends and lead joints including burning out joints and receiving lead complete all as specified & directed

All as per item No-22 above but 150mm bore.

All as per item No-22 above but 200mm bore.

All as per item No-22 above but 250mm bore.

All as per item No-22 above but 300mm bore.

Laying only 100mm bore cast/ductile iron pipes retrived from item No 22 here-in-before in same or new position in trenches after cleaning by suitable chemical, roading as per site requirement including existing connection with required size of Tee or MS clamp with rubber bush complete all as specified & directed. Note: Cast iron / Ductile iron fittings shall be measured and paid seperatly under respective iteme here-in-after.

All as per item No-27 above but 150mm bore retrieved from item No-23

All as per item No-27 above but 200mm bore retrieved from item No-24

All as per item No-27 above but 250mm bore retrieved from item No-25

All as per item No-27 above but 300mm bore retrieved from item No-26

M&L for 100 mm bore centrifugally cast (spun) ductile iron pressure pipes for water mains with socket & spigot ends conforming to IS 8329/2000 any length for classification of K7 suitable for rubber gasket joint (push on type) with cement mortar lining inside the pipe with outside zinc coating complete all including existing connection with required size of Tee or MS clamp with rubber bush as specified and directed. Note :Cutting of exisiting pipe, providing newfittings for pipe and lead joints shall be measured and paid separately under respective items of Sch 'A'

All as per item No-32 above but 150mm bore.

All as per item No-32 above but 200mm bore.

All as per item No-32 above but 250mm bore.

All as per item No-32 above but 300mm bore.

M&L for push on tyton (rubber gasket) joints suitable for 100mm bore DI pipe complete all as specified and directed.

All as per item No-37 above but uitable for 150mm bore DI pipe

All as per item No-37 above but uitable for 200mm bore DI pipe

All as per item No-37 above but uitable for 250mm bore DI pipe

All as per item No-37 above but uitable for 300mm bore DI pipe

Cutting existing Cast Iron pipes in position (comprising of two cuts) for insertion of new iron fittings (tees, branches etc) complete of the size 80mm bore of pipe

All as per item No. 42 above but 100mm dia pipe.

All as per item No. 42 above but 150mm dia pipe.

All as per item No. 42 above but 200mm dia pipe.

All as per item No. 42 above but 250mm dia pipe.

All as per item No. 42 above but 300mm dia pipe.

S&F in repair GM gate valve of size 50mm with iron wheel ISI marked IS-778 screwed down for iron pipe or ferrule including fittings such as union , socket, nipple , check nut etc including cutting of existing GI pipe and fixing properly complete all as specified and directed.

All as per item No. 48 above but of size 40mm dia.

All as per item No. 48 above but of size 25mm dia.

All as per item No. 48 above but of size 20mm dia.

M & L for repairs to leakage of cast iron pipe line 500mm dia size including excavation earth work in any type of soil, burning out old lead, cleaning joint and filling with fresh pig lead and cocking to make joint leak free complete all as specified and directed.

All as per item No. 52 above but of size 400 mm bore

All as per item No. 52 above but of size 300 mm bore

All as per item No. 52 above but of size 250 mm bore

All as per item No. 52 above but of size 200 mm bore

All as per item No. 52 above but of size 150 mm bore

All as per item No. 52 above but of size 100mm bore

All as per item No. 52 above but of size 80mm bore

M&L for 300mmx300mm size "D" joint made out of CI collar and rubber ring complete all as specified and directed.

All as per item No. 60 above but of size 250mmx250mm

All as per item No. 60 above but of size 200mmx200mm

All as per item No. 60 above but of size 150mmx150mm

All as per item No. 58 above but of size 100mmx100mm

All as per item No. 60 above but of size 80mmx80mm

S&F cast iron fittings for spigot socketed pipe like bends (any type, radius and angle), tapers any type (straight , bend, increasing, decreasing or double socket etc), Tee pieces, single branch, 'Y' junction, double branch, cross (all socket and spigot) collars, caps and plugs etc suitable for pipe line up to 300mm bore complete all as specified and directed.

S&F Ductile iron fittings for spigot socketed pipe like bends (any type, radius and angle), tapers any type (straight , bend, increasing, decreasing or double socket etc), Tee pieces, single branch, 'Y' junction, double branch, cross (all socket and spigot) collars, caps and plugs etc suitable for pipe line up to 400mm bore complete all as specified and directed.

M & L in repairs 80mm bore Cast Iron sluice valve both ends flanged PN-1.6 with iron wheel (ISI Marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed.

All as per item No- 68 above but of size 100mm bore

All as per item No- 68 above but of size 150mm bore

All as per item No- 68 above but of size 200mm bore

M & L in repairs 80mm bore Cast Iron Non Return valve (NRV) both ends flanged PN-1.6 (ISI Marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed.

All as per item No- 72 above but of size 100mm bore

All as per item No- 72 above but of size 150mm bore

M & L in repairs 100mm bore Cast Iron Foot valve one ends flanged (ISI Marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed.

M & L in repairs 80 mm bore Cast Iron Foot valve one ends flanged (ISI Marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed.

S & F in repairs of spindle of sluice valve 200mm bore (stainless steel) including check nuts made out of stainless steel complete all as specified and directed.

All as per item No 77 above but 150mm bore

All as per item No 77 above but 100mm bore

All as per item No 77 above but 80mm bore

RAJEEV CONSTRUCTION

M/S SHRINATH CONTRACTION

Balaji Associates

rohan traders

M/s S.M. Construction

M/s SCHOLASTIC ENTERPRISES