Electrical work

Amount

S&L of 1.1 KV Gr. 3 core 10 sq. mm Al/Ar cable on wall by MS Saddle as per direction of EIC. (Make - Polycab/Havells/RR Kabel).

S&F of 3 Core 10 sq. mm brass compression type gland & finishing the end of this PVC cable/Al. with dowels solderless socket by crimping method as per GS.

S&F 240 V Double Door 240 V, 2+10-Way SPN MCBDB in S.S. enclosure with IP-42/43 protection flushed in wall consisting with 1 No., 63A. DP Isolator, 10 nos., 6 to 10 A. SP MCB (10kA, 'C' - Curve) as outgoing, complete with DIN Channel, Neutral Bar, Earth Bar and other accessories & connection with suitable size of Cu. wire with proper socketing incl. necy. earthing attachment. [For Light Point] (Make :- Legrand / ABB Elegance / Schneider)

S&F Double Door 240 V, 2+10 Way SPN MCBDB in S.S. enclosure with IP-42/43 protection flushed in wall consisting with 1 No., 40A. DP Isolator, 1 No 1 module Pop over voltage release (for over voltage protection), 9 nos., 3 to 4 A. SP MCB (10kA, 'C' - Curve) as outgoing, complete with DIN Channel, Neutral Bar, Earth Bar and other accessories & connection with suitable size of Cu. wire with proper socketing incl. necsy. earthing attachment. [For Separate plug point] (Make: - Legrand / ABB Elegance / Schneider).

Distn wiring with 3x1.5 mm² PVC insulated & unsheathed FRLS Cu wire (Finolex/Havells/Polycab) through in 20 mm dia 3mm thick PVC MMS Rigid conduit pipe (Precision Make) complete with all accessories on wall to Light & fan points with 6 A Piano Key type Switch on 16 SWG M.S. Box with 3 mm thick Bakelite top cover & 3 nos. Brass connecting Bar inside flushed in wall & mending good the damages as per GS as follows. (Av. Run 9 Mtrs.)

Supply & Fixing 240 V, 2 nos 240 V, 6 Amp 5 pin plug socket & 2 nos 240 V, 6 amp piano key type switch (Anchor) on sheet metal switch board embedded in wall incl. S & F 200x150x65mm MS (16SWG) switch board and 3 mm thick bakelite/perspex top cover by brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box.

Supply & Fixing Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

S & F of Single LED Tube light fitting (Fittings cover must be inserted with 2 nos screws) [Make - Philips cat no. TMC 501 P 1 x T-LED / Wipro, cat no.WIO921208] complete with 18/20 Watt LED tube lamp [Make - Philips Master LED tube model no.18W 865 T8 I 2100lm / Wipro cat no.- LL13-181-65SE] suspended below the ceiling with S&F 2x20mm dia EI conduit up to 25 cm long with 'L' type MS clamp and making connection as to GS.

S & F of 240 V. 1200 mm (48") sweep A.C. ceiling fan without regulator incl. P2/S2 type capacitor, double ball bearing, down rod, canopy & fan blades etc. and engraving & Painting the Departmental Number (up to 14 digit) on Fan Body with Black Japan paint and interconnection complete in all respect. [Make: Crompton HB Plus or HS Plus/Orient Energy star / Usha Striker plus].

S/F of 240V., 1420 RPM, 300mm (12") Dia A.C. Exhaust Fan (EPC Electrical Pvt. Ltd. - Heavy Duty) incl. Cutting hole on wall, S&F Louver Shutter with Nuts, Bolts, washers etc. & mending good the damages to original finish.

S&F of sequential timer comprising with 1 no single pole power contractor (Make:- L&T, Type MR, Cat no CS94176) & 1 no digital time switch (Make: L&T, Cat no AUTS02DIG00) in SS enclosure incl. internal wiring by suitable copper wire to be fixed on wall as per direction of EIC. (For Exhaust Fan).

S&F of 240V 10W LED Bulk head luminaire to be fixed on wall with fixing material for lift shaft. [Make:-Philips, Cat no WT202W LED6S CW PSU S2 PC/ Wipro, Cat No, LW07-141-XXX-57-G1 / Crompton - LBHP-10-CDL]

Distribution wiring in 1.1 KV grade single core stranded 3 x 1.5 sq. mm PVC insulated & unsheathed copper wire (Havells/ Finolex/ Polycab) in 20 mm size MMS PVC rigid conduit 'FR' (Precision Make) incl. necy. fittings as required.

Finishing the 3 x 1.5 sq. mm PVC insulated & unsheathed copper wire ends by socketing with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Earthing installation with 50mm dia (TATA-Medium) G.I. pipe x 3.04 Mtr. Long and 1 no. 4 SWG G.I wire (4 Mtrs. Long) incl. bolt, double nuts & washers for Soft Soil incl. excavation of soil as to GS.

S & F of die cast aluminium housing 91 watt LED light fittings fixed on existing arm bracket including necessary connection.(Philips, Type BRP410 LED 092 CW HE NR FG S2 PSU GR / Wipro, Cat No LR07-102-XXX-57-G2).

S & F 16 SWG 200 x 150 x 65 mm stainless steel loop box / Polycarbonate loop box with 4 nos connector fixed on porcelain chair, recessed in wall with hinged top cover, rubber gasket, mechanical locking arrangement incl. S & F 1 no. 240V 16 A porcelain kitkat fuse with earthing attachment complete.

S&F 1.5 M long 50mm dia GI (ISI - Medium) "L" type single arm bracket with clamp, nuts & bolts etc. as required to be fixed on wall/pole as per direction of EIC.

Supply & fixing of angle iron frame fabricated from 40mm x 25mm x 5 mm thick hollow rectangular bar with sufficient cross and radial support including MS angle iron frame (by 40 mm x 25 mm x 5 mm) for holding the sign board and support from wall by 50 mm x 50 mm x 6 mm MS angle of 6 ft. apart with necessary hooks. Back side should be covered by S&F of 22 SWG GI sheet. The above structure should be painted with synthetic enamel paint over one coat of primer. The above sign board to be fixed on wall or Parapet as per direction of EIC. [8 ft x 3 ft x 6 inch -- 1 Set]

Supply & Installation of 4 mm thick polyvinyl coated Aluminium Composite Panel board ( Aludecor / Alstone / Pratap Bond) of blue colour as the base for fixing raised letter duly fixed on the MS structure as per direction of EIC. The riser structure should be covered with ACP sheet incl. side portion on the board. [8 ft x 3 ft -- 1 Set]

Supply & fixing of Superior Quality acrylic dimensinal letters (Size - 12" as per direction of EIC) on the pre- fabricated existing ACP board. The computerised processed letter in bold English fonts and milky white in colour shall be placed in horizontal line maintaing suitable space with Male & Female attachments for each letter and necessary interconnections as per direction of the EIC.The matter as follows and should be approved at the time of construction from the appropriate authority.

"NIGHT SHELTER" "TRAUMA CARE CENTRE"

S&F of imported 12 V DC IP-65 LED modules having three LED in a single base module and the LEDs will emit mild attractive blue colour light and the two run of LED for each letter base area and shall be properly fixed in the male part of the Acrylic letters including necessary interconnections. Specification of the LEDs is given as below: a) LED-white, GE/Samsung b) Type-Straight, 3 Nos. Led per module c) Life – 70,000 burning hours. d) Visibility – 100 mtrs at least, for normal eye e) Power consumption – 1.5 watt per module

S&F of imported heavy duty 12V DC, 400 VA SMPS (Make-approved by EIC) with properly rated isolation transformer in suitable enclosure to be fixed with the signage frame for driving total LED system of the signage in a distributed manner for uniform load sharing in view of long run continuous use including necessary interconnections.

Scaffolding arrangement for working at 10 ft. height on entrance of the building by bamboo, ropes and wooden planks etc. and shifting of scaffolding materials after completion of work.

Defect Liability Period -1 (One) year

GHANASHYAM ELECTRIC STORES

RIDHI SIDHI ELECTRICAL