Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.5 LAccepted-AOC OPP MARUTI SERVICE CENTRE SARACHARMA POST SRI VIJAYA PURAM 744 105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L1 | Accepted-AOC L1 | |
| 2 | L2₹46.0 L+₹1.5 L (3.28%)Rejected-Finance MB 58 JUNGLIGHAT KATHIR MARKETING SERVICE MB 58 JUNGLIGHAT NEAR TCI OFFICE SOUTH ANDAMAN ANDAMAN NICOBAR 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹49.0 L+₹4.5 L (10.1%)Rejected-Finance | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹49.0 L+₹4.5 L (10.2%)Rejected-Finance 10 11 PANDRI GOVIND NAGAR RAIPUR CHATTISHGARH 492001 | RAIPUR | CHHATTISGARH | 492001 | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹49.5 L+₹5.0 L (11.1%)Rejected-Finance 1 TROPICAL REFRIGERATION PHONIX BAY PORT BLAIR PORT BLAIR ANDAMAN NICOBAR 744101 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744101 | L5 | Rejected-Finance Not Being L1 |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
16 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Minniebay
GE Minniebay Jugnlighat Post Minniebay Port Blair 744103
PROVISION OF PERIMETER ROAD AT MARCOS AND PROVISION OF GATE FOR ADMIN BLOCK AT NAD DOLLYGUNJ UNDER GE MINNIEBAY PORT BLAIR
2023_MES_634447_1
8338/E8
Open Tender
Civil Works
Item Rate
180 days
Minniebay Port Blair
As per tender documents
10 documents required · 10 mandatory
₹500
GE Minniebay
₹92,000
Yes
17 May 2024
26 Dec 2023
18 Jan 2024
27 Dec 2023
16 Jan 2024
10 Jan 2024
Amount
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out as in soft/loose soil complete all as specified and as directed by Engineer in Charge
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation, etc., and getting out in soft/loose soil complete all as specified and as directed by Engineer in Charge
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed by Engineer in Charge
Removing excavated material of soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
M&L for plain cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed by Engineer in Charge
M&L for plain cement concrete type C2 1:3:6 (using 40mm graded stone aggregate) in foundation filing and mass concrete concrete complete all as specified and as directed by Engineer in Charge
Back filling of surface area using approved earth obtained from excavation complete all as specified and as directed by Engineer in Charge
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed by Engineer in Charge
M&L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer in Charge
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engineer in Charge
M&L for 100mm thick Cement concrete type C 2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing even & smoth without using extra cement complete all as specified and as directed by Engineer in Charge
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade with grey cement and pigment complete all as specified and as directed by Engineer in Charge
M&L for pre-cast cement concrete block masonry with solid blocks,type C-1,1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed by Engineer in Charge
M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces and finishing the top surface even and fair complete all as specified and as directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer in Charge
M&L for formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits of foundation (if any) and plinth beams for rough finished surfaces of concrete, flat complete all as specified and as directed by Engineer in Charge
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete, flat complete all as specified and as directed by Engineer in Charge
S&F TMT steel bars 10mm dia and over as reinforcement cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engineer in Charge
M&L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups spaces and binder cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engineer in Charge
M&L RCC M-30 Design mix using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams etc., and mass concrete complete all as specified and as directed by Engineer in Charge
M&L RCC M-30 Design mix using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and as directed by Engineer in Charge
M&L for 20mm thick granite machine cut in skirting/dado/column and wall laid over 10 mm cement screed 1:3 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type complete all as specified and as directed by Engineer in Charge
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed by Engineer in Charge
Kathir Marketing Services
BISAKHA PLUMBING WORKS
KRISHNA TRADING COMPANY
Tropical Refrigeration
ANDAMAN PAINTS PVT LTD
SKY GROUP
M/s Sriya Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .