Job 1 Construction of Lift Elevators well in additional Judicial Court Complex at Una Sub Head C.O Civil work

Amount

Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating out from R.C.C. /R.B. works:- R.C.C. work including carriage of material with in all leads and lifts and other incidentials The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Dismantling tiled floors laid in mortor upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metre lead(wooden/concrete joists to be measured and paid for separately) for thickness of tiles upto 25mm including carriage of material with in all leads and lifts and other incidentials The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Excavation in foundation trenches etc in all classification of soil in dry or saturated condition upto any depth and lift including pumping and bailing out water where required including stacking the serviceable material and unserviceable material separately as directed and then returning the stacked soil in 15cm(fifteen centimeter) layers when required into plinth and sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed by the engineer in charge including carriage of material in all leads and lifts disposed material to be neatly dressed leveled as per instructions of the Engineer in charge.

Providing and laying boulder filling dry hand packed tighly in foundation including carriage of material within all leads and lifts and other incidental. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced concrete in open foundation/ for all type structure complete of plain cement concrete nominal mix 1:4:8 ( One cement :four sand:eight graded crushed /broken stone aggregate 20mm (twenty Millimeter) nominal size in or under wateror ground complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and technical specification Clause 802.803.1202 and 1203 as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidental. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced concrete in open foundation/ for all type structure complete of plain cement concrete grade M-10 (M-Ten) with cement contents not less than 250kg(Two hundred fifty kilogram) per cubic metre in or under water and curing complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and technical specification Clause 802.803.1202 and 1203 as per the direction of the Engineer-in- charge including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame of 30x30x5 mm ( thirty into thirty into five millimetre) size so as to give a fair finish including centering shuttering strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforcement and plain concrete work in foundation footing and bases of columns etc and mass concrete including carriage of materials within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimetre) size so as to give a fair finish including centering shuttering strutting and propping etc with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of same for in-situ reinforced concrete and plain concrete workin flat surfaces such as soffits of suspended floors roofs landings and the like floors in all thickness including carriage of materials within all leads lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing form work with steel plates 3.15 mm( three decimal fifteen millimetre ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) so as to give a fair finish including centering shuttering strutting and propping etc with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square rectangular or polygonal in plan in any height including carriage of material; within all leads lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give a fair finish including centering ,shuttering ,strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in:- beams cantilevers girders and lintels side and soffit of beams ,beam haunchings, cantilevers, bressumers and lintels in any depth and heights /thickness including carriage of materials within all leads lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give fair finish including centering ,shuttering ,strutting and propping etc with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work:- in edges of slabs and break in floors and walls etc. upto any width and height complete including carriage of materials within all leads lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimetre square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic metre mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in foundation,footing bases of columns and the like and mass concrete in all depth including carriage of materials within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimetre square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic metre mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in suspended floors, roofs, landing and shelves and their supports balconies beams,girders, bressumers and cantilevers upto all floor level including carriage of materials within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimetre square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic metre mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts up to floor all levels complete including carriage of materials within all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying tor steel(TISCO, JINDAL PANTHER of (JSPL) /Sail/RINL/Shyam steel make) reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in superstructure above plinth level upto all floor level in cement mortar 1:6(one cement: six sand ) including curing complete and carriage of material with in all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

A)Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with Jindal aluminium extruded built up standard tubular and other sections of approved make confirming to IS-733 and IS-1285 anodized transparent or dyed to required shade according to IS- 1868(minium anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions and top and bottom, sides with required PVC/neoprene fill etcetera Aluminium sections shall be smooth, rust free, straight mitered and jointed mechanically where ever required including cleat angle, aluminium snap leading for glazing/ paneling, C.P. brass stainless steel screw, all complete as per architectural drawing as per the directions of Engineer-in-Charge for: a)Door,windows and ventilators and glazed partitions frames including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

B) For Shutters of doors, windows and ventilators including providing and fixing hinges/pivots and making provisions for fixing of fitting wherever required including the cost of PVC/Neoprene gaskets required including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 12mm thick water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning including mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing glazing with glass panes of 5.50mm(five point fifty millimetre) thickness(weight not less thann 13.75kilogramme square metre in aluminium door, window , ventilator shutters make it Hindcol Co.Jindal Indian aluminium Co. and partition etcetra with PVC/neoprens gasket etcetra complete upto floor all level/height as per the architectural drawings including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Providing and fixing 12mm dia steel bar grill No.304 required pattern in wooden frame/ aluminium frame of windows etcetra including fixing with hole frames to any floor level/height as per direction of Engineer-in-charge entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Providing and fixing anodized aluminium sliding door bolts anodized colour or shade with bolts and nuts screws etcetra complete including carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. 250×16mm(two hundred fifty into sixteen millimeter)

Providing and fixing anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. i)200×10mm(two hundred into ten millimetre)

Providing and fixing anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government. . . i)100×10mm(one hundred into ten millimetre)

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . (a)125mm(one hundred twenty five millimeter)

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .. (a)100mm(one hundred millimeter

Providing and fixing 10mm(ten millimeter) thick double charged polished anti skid water proof stain and impact resistent heavy duty vetrified tiles Orinet/Kajaria/Nitco /orient /RAK/Somany Johnson and Johnson (600x600x10mm)(six hundred into six hundred into ten millimeter)manufactured of approved shade and colour in flooring treads of steps and landing laid on a bed of 12mm(twelve millimeter) thick cement mortor 1:3( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles as required complete upto all floor level/ height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying Duro stone vetrified tiles Nitco/orient/kajaria or its equivalent (600x600x8mm)(six hundred into six hundred into eight millimetre) in grey/ coloured of approved shade in skirting risers of steps and dado on 12mm(twelve millimetre) thick cement mortor 1:3( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government...

Providing and fixing 100mm(one hundred millimetre) dia on wall face PVC (D-plast)rain water pipe of working pressure not less than 4.5 kg (four point five kilogramme)per square centimetre including filling the joints with approved adhesive complete including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing on wall faces PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain bend 150mm ( one hundred fifty millimete) dia.including carriage of material with in all leads and lifts and other incidentals

Providing and fixing 100mm(one hundred millimetre) dia M.S. holder bat clamps of approved design to PVC pipe embeded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimetre ) of mix 1:2:4 (one cement :two sand :four graded stone aggregate) 20mm (twenty millimetre ) nominal size and cost of cutting holes and making good the wall etc. including carriage of material in all leads and lifts and other incidentals .

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter with enamel paint other than white including carriage of materials within all leads and lifts and other incidentials.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt dust and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink in all floor height including carriage of material in all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping with enamel paint other than white including carriage of material within all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

6mm (six millimetre)Cement plaster to ceiling in all floor level in Cement mortar 1:3(One Cement:three Sand) including curing and carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

15mm (fifteen millimetre)cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering in all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement : six sand) including curing and carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

15mm (fifteen millimetre)cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering in all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement : six sand) including curing and carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Applying birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops dust loose materials and other foreign matter sand paperd smooth to give final matt finish to the surface complete including carriage of material within all leads and lifts and other incidentials.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Distempering with oil bound distemper of approved brand and manufacture(Two coats)and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth.including carriage of material within all leads and lifts and other incidentials.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth surface of ICI(Dulux Gloss) Nerolac, Berger(Luxol High Gloss) Asian Paints(Premium AP colite Gloss) shalimar make complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm( seventy five millimetre ) thick (unconsolidated) bed dry brick/stone aggregate 40mm (forty millimetre ) nominal size with rammed and consolidated and grouted with preparation of ground. including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing plinth protection 50mm thick in cement concrete 1:3:6(one cement: three sand: six graded stone aggregate 20mm( twenty millimetre ) nominal size)including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like in all height including carriage of material within all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Vikas puri