SPECIAL REPAIR TO BLDG NO P-28A (CK HOUSE AND DINING HALL) AT UDAIPUR MIL STN

Amount

Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washing or distempering with putty as per exiting surface complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ reveals incl. white washing or distempering with putty and no separate items for these shall be paid).

Taking down wooden chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washing or distempering with putty as per exiting surface complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ reveals incl. white washing or distempering with putty and no separate items for these shall be paid).

Taking down steel windows with shutters area not exceeding 1.50 Sqm each, from wall fixing complete all as specified.

Material and labour for factory made single extruded WPC (Wood Polymer Composite) solid door/window/chowkats single door frame of size 50 x 75mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade),calcium carbonate 7natural fibers and no toxic additives fabricated with miter joint after applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of 750kg/cum,screw withdrawal strength of 2200N(Face) & 1100N(Edge),Min compressive strength of 58 N/mm2,modulus of elasticity 900N/mm2 and resistance to spread of falme of class A category with property of being termite/borer proof,water/moisture prrof and fire proof& fixed in position with MS hold fast/lugs/SS dash fastners of required dia and lenmght complete all as as specified. Note:- MS Hold fast/lugsof SS dash fastners shall be paid seperately.

All as per Item No. 04 -Ditto- but but of frame size 65x125mm for double door

Supply and fixing for 2nd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

Supply and fixing IInd class (hollock) hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

Supply and fixing factory made solid PVC moulded door shutter with wood free EPS 28 to 30 mm thick (Stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plane colour PVC sheet on back face supplying and fixing in frames at site as per speicfication and drawing.

Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.

Supply & fixed 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified.

Supply and fixing 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc.

Supply and fixing 200 mm mild steel barrel tower bolts, ISI marked, stove enameled black with bright bolt and fixed, complete all as specified.

Supply and fixing 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Supply & fixed MS helical door spring 150 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats.

Supply and fixing double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber all as specified and directed by Engr-in-charge.

Material and labour for providing and fixing of window, ventilator fabricated from roll formed sections made of galvanized steel colour coated /powder coated (Base steel as per IS 513 'D' quality, Galvanized as per IS 277 with Zinc of 120 grams/Sqm) with total coated thickness of 0.60 mm Paint specifications: Coated Sections should be coated with primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyster paint of 12-16 micorns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyster Powder up to 50-60 microns thick. Dimensions of Sections :Sections for Frame of 72mm x 50mm, Section for Mullion of size 72mm x 50mm, Section for Shutter Frame of size 47mm x 20mm, Section for Frame Glass Beads of 12mm x 12mm, and Section for Fly mesh of 40mm x 20mm. Fixing Details : Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined to the Frame/Mullion using Nylon Cap. Ethyl Propylene Daimine Monomer (EPDM) Gasket should be used all around glass in shutter and fixed galss. Rubber Gasket should be used around Fly mesh to fix in Mesh Shutter. Accesories: Each Glazed shutter should be provided with S.S. Pivot Hignes-01 set, Seccolor Handle & Seccolor Stay Glass: Glazed shutter and fixed glass portions to be provided with a glass of 5 mm plain float Glass. Mesh: Mesh shutter shall be provided with a stainless steel 32 guage Fly mesh of 304 grade with 144 holes per sq. Inch. Windows shall be provided with grill made of 10mm Sqm bars welded to at 150mm centre-to-centre, 6mm x 12mm MS flat Iron. Total grill unit should be powder coated and fixed to window frame with screws. Window frame should be fixed to brick/concrete masonory by using Nylon self-expanding caps and driving MS electroplated 80 mm long screws into the caps through frames. Note: The item includes everything as, painting the surfaces, fixing, all necessary accesories, glass, mesh, etc, all as per given spcifications, complete all as specified and directed by Engr-in-charge.

Supply and fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete all as specified and directed.

Supply & Fixing 5.0 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified Note minimum thickness of powder coating 50 micron.

Supply & fixed for powder coated aluminium grill of 7.00mmx3mm thick section square, rectangular, triangular, circular shape aperture not exc 7 cm in length or width fixed with H or F channel complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

Supply & Fixing 0.50 mm thick prepainted galvalume aluminium zinc coating AZ-150 GI based corrugated steel coloured having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws at every alternate corrugation as specified etc.

Supply & Fixing 0.50 mm thick galvalume aluminium zinc coating AZ-150 GI based plain steel sheet coloured having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws at every alternate corrugation as specified etc.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified.

Supply and Fixed suspended false ceiling system using Chicago metallic (E - grid) exposed suspended system, grid size 600mm x 600mm comprising of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 6mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board to be placed in the grid system duly suspended with 4mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Material and labour for Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate), 25 mm thick in sub base of flooring etc, complete all as specified and directed.

Material and labour light coloured Non Skid ceramic jointless tiles of Size 400 x 400mm of thickness 7 to 8mm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed. Make :- Kajaria/johnson/somany

Material and labour for ceramic tiles white 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed. Make :- Kajaria/johnson/somany

Material and labour light coloured Glazed ceramic tiles in vertical serfaces 600 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles, complete all as specified and directed. Make :- Kajaria/johnson/somany

Material and labour Pre-Polished & Machine Pre-cut Kota stone slab flooring 18-22 mm thick jointed with grey cement slurry mixed with pigment to match the shade of the slab including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6, complete all as specified and directed.

Material and labour Pre-Polished & Machine Pre-cut Kota stone slab 18-22 mm thick in riser of steps, skirting, dado and pillars etc laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete all as specified and directed.

Material and labour for 18-20 mm thick green marble slabs on window cill/cooking platform/shelf/flooringwith & including half round edge moulding and laid over cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match etc complete.

Material and labour for 18-20 mm thick 'Jet' Black Granite slabs on cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type including half molded at corners

Cutting holes exc. half brick but not exc one brick in brick walls built in CM or cement lime mortar & stone walls built in lime mortar for inserting holdfasts & making good dismantled portion in CM(1:3) or PCC(1:2:4) Type B-1 as required complete all as specified and directed.

Supply and fixing 50mm bore GI Tubes, `medium grade' galvanise with all fitting & fixed complete to walls & ceilings, laid in floors or for hanging of suspender for roof ceiling complete all as specified and directed.

Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample including taking down existing curtain rod complete all as specified and directed.

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair, complete all as specified and directed.

Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.

Supply & fixing of stainless steel decorative fincals wall to wall trade pattern suitable for decorative type curtain rods 22 to 25mm dia as per sample as in repair, complete all as specified and directed.

Supply & fixed 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kgf/Sqcm fixed complete to walls,ceilings or in floors including taking down of old GI tubing, 40 mm bore all as specified and directed.

Taking up or down steel tubing and connections of 15mm bore including cleaning for refixing or removal to store provision for branch connection by inserting tee union elbow etc. complete all as required at site.

All as item above but 20mm bore, complete all as specified.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction of Engineer-in-charge.

Material & Labour Steel Tubes 20mm bore, 'medium grade', galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and as directed.

Refixing old steel tubing of 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.

Supply and fixing vitreous china wash basin white flat back size 550 x 400mm oval shape excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners all as specified. Make : Cera/Parryware/Hindware

Supply and Fixing in repair sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete.

Supply and fixing in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron trap portion to match with the existing surface of floor all as specified. Make : Cera/Parryware/Hindware

Supply and fixing in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified. Make : Cera/Parryware/Hindware

Supply and fixing in repair 15mm bore pillar taps cast copper alloy chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, all as spcified. Make :- Cera/parryware/Jaquar

Supply and fixing in repair 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule all as specified Make :- Cera/parryware/Jaquar

Supply and fixing in repair 15mm bore angle valves/stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified

Supply and fixing in repair PVC connection 15mm size with PTMT nuts of length 450mm all as specified

Supply and fixing in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified

Supply and fixing in repair brass chromium plated soap tray/dish fixed with CP screws etc complete all as specified

Supply and fixing in repair rotational molded polyethylene water storage tanks white tripple layered (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed.

Supply and fixing in repair PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes all as specified

Supply & Fixed in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified.

Taking down cement plaster from brick walls/stone masonry walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on brick/stone masonry or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified.

Material and Labour for 15mm thick rendering on fair faces of brick work/stone masonry, concrete surfaces (external walls) or stone walls upto tripple storey bldgs in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions, finished even and fair, complete all as specified. Note : (i) WPC shall be measured and paid separately.

Material and labour 10 mm thick cement plaster in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement all as specified and directed.

Supply only liquid water proofing compound, ISI marked complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty, complete all as specified and directed.

Material & Labour for preparation of new plastered surfaces of wall and applying two coats of weather coat over a coat of 1 mm thick wall care putty for neat and smooth finishing complete all as specified.

Material & Labour for preparing new plastered surfaces and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty on ceiling complete all as specified and directed.

Material and labour for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper (acrylic) white or tinted over a coat of priming over a coat of 1 mm thick wall care putty on walls upto tripple storeys bldg complete all as specified and directed.

Material and labour for preparation of old plastered or un-plastered surface applying Two or more coats of 100% Premium acrylic emulsion paint (Weather Proof Paint) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material and labour for preparation of old Plastered or un-plastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying one coat of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty complete all as specified.

Material and labour for two coat of synthetic enamel painting to new wood surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer complete all as specified and directed.

Dismantling of any dia and size cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out complete all as specified and directed.

Supply and fixing 110mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, laid in trenches or in floor complete all specified and directed.

Supply and fixing 110mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, fixed to wall complete all specified and directed.

Supply and fixing 75mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, laid in trenches or in floor complete all specified and directed.

Supply and fixing 110mm dia UPVC (SWR) bends any radius including cutting of holes.

Supply and fixing 75mm dia UPVC (SWR) bends any radius including cutting of holes.

Supply and fixing 110mm dia UPVC (SWR) branch piece single (single 'Y') equal or unequal.

Supply and fixing 75mm dia UPVC (SWR) branch piece single (single 'Y') equal or unequal.

Supply and fixing 75mm dia UPVC (SWR) floor trap, plain with grating including jointing with solvant cement complete all specified and directed.

Supply and fixing 75mm dia UPVC (SWR) multi floor trap, with grating including jointing with solvant cement complete all specified and directed.

Supply and fixing UPVC (SWR) gully trap 125/110 mm setting and jointing with solvant cement complete all as specified and directed.

Supply and fixing UPVC (SWR) vent cowl 110 mm bore setting and jointing complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed.

Material & Labour for 75 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished complete. Note : Joints 12 mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

Supply and fixing for PCC coloured interlocking (glossy finishing) paver blocks confirming to IS-15658-2006 of 60 mm thickness, M-35 grade as in hardstanding etc. laid over and including 50 mm thick screed or bedding layer of sand, complete all as specified.

Material & labour for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles etc complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Material and labour Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolition of PCC as in roof padding etc over roof surfaces exc. 4 mtr height from ground level complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B-0 using (12.5 mm graded stone aggregate) as in padding on roof top including WPC as per manufacturers instructions to achieve the slop required, with minimum thickness of 25mm consolidated and finished even and fair without using extra cement. (WPC shall be measured and paid separately

Material & Labour for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound as per manufacturer's instrutions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

Material and labour for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non Approachable roofs-

Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.40 Ltr/Sqm on top of dry surface of finished cement mortar plaster.

One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces.

3mm thick APP modified polymeric membrane with non woven polyster reinforcement shall be laid. The side overlaps shall be min 75 mm and the end laps shall be min 100 mm. All overlaps and joints shall be sealed by flame all as specified and directed by Engr-in-Charge.

Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.

Material & Labour for Providing and laying at or near ground level factory made kerb stone 300x300x150mm of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. all as directed by Engr-in-charge.

Material and labour for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed on stone/brick masonry wall surface with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified for One light point / Fan/ bell point controlled by one switch.

One light point/fan/exhaust fan point controlled by one switch with cables 1.5 sqmm size.

One 3 pin socket outlet, 5 amps on the same board with other switches, with cables 1.5 sqmm size.

One 3 Pin socket oulet 5Amps on indepndent, with cables 1.5 Sqmm size

One light point controlled by two 2 - way switches, with cables 1.5 sq.mm size.

One 3 Pin 15A pin socket oulet 15Amps on indepndent board with cables 2.5 Sqmm size

All as per item No 2 above for AC point with PVC insulated unsheated FR cable, 1100 volt grade multy stranded copper conductor of size 4.00 sqmm indcluding earth wire PVC insulated unsheathed 100 volt grade cable with stranded copper conductor of size 4.00 sqmm ((Nominal area) common econnected to earth dolly controlled by one switch complete all as specified and as directed by Engr-in-Charge.

Supply and fixing switch piano flush type single pole one way 5/6 Amps.

Supply and fixing lamp holder, PVC/Polycarbonatetype with back plate suitable for batten fittings including dismantling old one.

Supply and fixing socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete including dismantling old one.

Supply and fixing of switch piano 15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Engr-in-Charge including dismantling old one.

Supply and fixing socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type including old one.

Supply and fixing ceiling rose surface tpe 3 terminals to be fixed on PVC block including dismantling old one.

Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd.

Supply and fixing switch piano flush type single pole 16 Amp 2 way

S/F LED integrated batten tube light fittings 20W 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED lamp 9W system lumen (NOM) 600 with all accessories all as specified and directed by Engr-in-Charge.

Material and labour MCB TPN DB comprising of sheet metal enclosure double door suitable for mounting MCB 415 Volts 4 way including dismantling old one.

Material and labour MCB SPN DB comprising of sheet metal enclosure single door suitable for mounting MCB 240 Volts with busbar 200 amps rated 8 way including dismantling old one.

Supply and fixing MCB TPN 40 to 63 Amps 415V 10KA 'B' curve miniature circuit breaker (MCB) and current carrying capacity in the DB complete with connection testing and commissioning.

Supply and fixing SPN 32-40 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing SP 6 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Taking down carefully, deposited to MES store and hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specfied and directed by Engr - in - charge.

Taking down old unsv exhaust fan, and Supply and fixing exhaust fans steel body AC single phase 240 Volts of size 380 mm sweep with fixing frame, louver and complete accessories including making hole with suitable size for Exhaust fan, after completer of work, finishing with cement and plastering and repainting with existing color all as specified and directed by Engr-in-Charge.

Material & labour for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as shown in electrical plate No 3 of SSR part-I 2009 connected to main switch board all as specified and testing on completion including. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 15 mm dia of light grade, for protection of earth lead complete all as specified and directed.

Supply and fixing Submain wiring alongwith earth wire with the following sizes of 2x2.5 sqmm + 1x2.5sqmm earth wire FR PVC insulated copper conductor, single core cable in surface/recessed as required. Note : Two run of 2.5 sqmm cable with colour code of R, Y & B for phase/ neutral and one run of same size cable with Green colour as earthing for socket point alongwith required PVC conduit and connected items will be measure as one RM.

Supply and fixing Submain wiring alongwith earth wire with the following sizes of 2x4.0 sqmm + 1x4.0 sqmm earth wire FR PVC insulated copper conductor, single core cable in surface/recessed as required. Note : Two run of 4.0 sqmm cable with colour code of R, Y & B for phase/ neutral and one run of same size cable with Green colour as earthing for socket point alongwith required PVC conduit and connected items will be measure as one RM.

Supply and fixing LED security light luminaries of 20 watt for energy saving having IP-65 degree of protection made of pressure die cast aluminum housing and heat resistant thoughned glass with excellent thermal management, LED's should have better optics and uniform distribution of light including GI tubing 40mm dia light grade 1.2 mtr long pipe bent to shape 120 degree for mounting of security light and fixed to wall/pole, with suitable MS clamps 2 Nos with nut and bolt and washers including connecting complete including 2.5 sqmm stranded copper conductor of suitable length as per direction and approved by Engr-in-charge,

Taking down carefully electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25/50 litre, complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. with MES stores and refixing the geysers at same place with required grounting, fasteners/ nut bolts, PVC pipe connesctions as required at site, all as specified and directed by Engr-in-Charge.

Excavating in trenches n.exc 1.5 m width and n.exc 1.5m in depth for taking out cable and cable cover and getting out in any type of soil

Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 Cm.

Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point

Material and labour for spreading, levelling in layers n exc. 25 cm thick and ramming of sand cushioning to PVC/ XLPE cables with tibba sand and punning to provide required cover to UG cables. Note :- For the purpose of payment only punned thickness will be measured.

Supply and laying reinforced precast concrete cable cover, class LV, type 1 flat, 250mm x 150mm x 40mm.

Taking out old unserviceable protection pipe and supply and fix medium grade 50 mm dia GI pipe fix complete to wall , poles etc with suitable clamp for protection of cable complete all as directed.

Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 25 sq mm 3.5 core.

Material and labour for plain cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate for making good surface of road/PCC path crossing for PVC/XLPE cable and make smooth without extra cement all as speccified by Engr-in-Charge.

Supply & fixing sheet metal enclosures Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 Vlots.

Material and labour for scrapping out old rusted and corroded sufaces to making good surface of iron body/CRCA sheet main DBs of any shape & size for external and internal surface and preparing the exposed surfaces & applying two coat of aluminium paint paint over a coat of red oxide zinc crome primer complete all as specified and directed.

Supply and fixing exhaust fans AC single phase 240 Volts of size 380 mm sweep with louver and complete accessories including making hole with suitable size for Exhaust fan, after completer of work, finishing with cement and plastering and repainting with existing color all as specified and directed by Engr-in-Charge.

M/s Ajay kumar Garge (BID ID -3155663)

THE SHIVAM ENTERPRISES (BID ID -3157253)