Loading
Loading…
Loading…
Tender Value
₹12.4 Cr
EMD Value
₹15 L
Closing Date
10 Aug 2026, 9:30 pm
Karnataka State Road Transport Corporation
karibasappa
9886529784
Construction of PME Seva Funded Electric Bus Depot at Davangere
KSRTC/2026-27/BD/WORK_INDENT183
KSRTC/2026-27/BD/WORK_INDENT183
Open
Buildings
Two Tender Document System(Two Cover)
KSRTC Divisional Controller Office Tumakuru
7 documents required · 7 mandatory
To Qualify for award of this contract the tenderer must have valid Class I Contractors Registration Certificate, registered in KPWD / MES / CPWD as on the Date of Tender Notification Scanned copy of Valid contractors Registration Certificate.
To Qualify for award of this contract the tenderer, as a prime contractor, should have in his name Satisfactorily completed at least One Single work of Similar Nature of RCC Framed Structure Building Work with C.C. Pavement Costing not less than Rs 617.67 Lakhs. The work should have been commenced and completed in any year during the last five financial years (i.e from 01-04-2021 till date of submission) i.e the work must have commenced on or after 01-04-2021 and completed till the date of submission of tender.Note: The work done certificate shall clearly mention the date of commencement & date of completion. Other wise it will not considered for evaluation.Scanned copy of the Work done Completion Certificate, Certified by an Officer not below the rank of Executive Engineer in case of works done in Govt.,/ public sector undertakings
To Qualify for award of this contract the Tenderer should have in his name Executed in any one Financial year during the last 5 years (i.e, during the years 2021-22 , 2022-23 , 2023-24 ,2024-25 & 2025-26, the following minimum quantities of work in any of the Government / Public Sector undertaking.1.RCC M25 and Above Grade 1671.23 cum2. TMT/Mild Reinforcement Steel 223.25 Tonne3. Embankment 10748.00Cum4. Brick Work 695.50cum5. Wet Mix/DLC/GSB - 2030.00Cum6. M30 & above Pavement Work:-1417.60Cum7. M.S Angular/Tubular Work:-26.05Tonne8. Electrical Work:- 8.14LakhsNOTE : Incase of Solid block masonry work Sqm Qty will be Converted to CumScanned copy of the Work done Certificate, Certified by an Officer not below the rank of Executive Engineer in case of works done in Govt.,/ public sector undertakings
Liquid assets and or availability of credit facilities of not less than Rs. 370.60 Lakhs (credit lines /letters of credit /certificates from Banks) for meeting the fund requirement etc.Scanned Copy of the Letter of Credit/From any nationalized Bank /Schedule bank (excluding Co-operative banks), clearly specifying name of the work (as per the prescribed format) (Annexure-A) LOC Note :The certificate should contains Name of the work, and address to the Executive Engineer, KSRTC, CE Division, Tumakuru and Valid dates and amount etc
To Qualify for award of this contract the tenderer in his name should have, in the last five financial years ( i.e. during the years ,2021-22,2022-23, 2023-24 ,2024-25 & 2025-26) achieved in at least two financial years a minimum average financial turnover of Rs 2470.66 Lakhs (in all classes of civil engineering construction works only ).Scanned copy of audited profit / loss statement of at least two financial years in which minimum financial turnover of Rs. 2470.66 Lakhs. is achieved . (Certified by Chartered Accountant along with UDIN and membership number only. Statement issued by others will not qualify for eligibility).
To Qualify for award of this contract the assessed available tender capacity of the tenderer should be more than the amount put to tenderNote: The bid capacity of the tenderer is calculated based on the formula. Assessed Available Tender Capacity (Ax N x 1.5) - B) WhereA Maximum value of Civil Engineering works, (updated to the financial year of Tender invited), executed in any one year during the last five years. (Completed as well as works in progressB Value at price level (updated to the financial year of tender invited) of existing commitments and ongoing works to be completed during the next two years.N Number of years prescribed for completion of the work for which tender is invited1.5 Multiplying factor for assessing the available tender capacity for works costing above Rs.100.00LakhsThe bidder/Contractor must submit details of existing commitments and on going works to be completed in the Prescribed format only (Annexure - B) Details of the works which have been completed and final bill is yet to be settled should also be provided .In case the bidder does not have any existing commitments, the same should be indicated as NIL in the prescribed format duly signed by the bidder Details submitted in any other format or other format or submission of document in which the bidder himself has calculated the bid capacity will not be considered and will not qualify for eligibility.
Equipments Required during Execution of Works1.Excavator 01 nos(Owned)2.Tipper04Nos3.Water Tanker 6000Ltr Capacity01Nos.4Shuttering:4000Sqm5.Self loading Conceret Mixer 01Nos Soil Compactor 01NosScanned Copy of RC/Purchase Invoice if owned and If machinery hired/leased concerned agreement with relevant machinery document with agreement Should be in valid Period and agreement Date shall be furnished.
₹7,500
₹15 L
10 Jul 2026
10 Jul 2026
12 Aug 2026
28 Jul 2026
30 Jul 2026
Construction of PME Seva Funded Electric Bus Depot at Davangere
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all material...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mo...
Providing 12 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...
Providing and fixing factory made Green certified, Anti Termite, UV resistant,high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisin...
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel...
Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing Steel work welded in built up sections/ framed
work, including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer using structural steel et...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with p...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour , 600 mm long towel rail with...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g (CSR 2023-24/Vol- 2 / 118 / 13.17.1 )
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at join...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing and fixing one piece construction white vitreous china squatting
plate with an integral longitudinal flushing pipe, white P.V.C. automatic
flushing cistern, with fittings, standard size G.I....
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ tr...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) ...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) ...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all material...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mo...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mo...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of m...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of m...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3
fine sand) on concrete surface / ceilings including rounding off corners
wherever required smooth rendering, providing and removing s...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3
fine sand) on concrete surface / ceilings including rounding off corners
wherever required smooth rendering, providing and removing s...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...
Providing and fixing factory made Green certified, Anti Termite, UV resistant,high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisin...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with p...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (SRP Vol- 2 / 124 / 14.7.1 )(First Floor)
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually con...
Providing and fixing 100 mm sand cast Iron grating for gully trap (SRP Vol-2 / 128 / 14.29 )(First Floor)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwe...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwe...
Providing and fixing Structural Steel work riveted, bolted or welded in
built up sections, trusses and framed work, including cutting, hoisting,
fixing in position and applying a priming coat of appro...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ tr...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...
Providing & Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall, Underground tank. The material having chemical resistance properties, seals shrinkage cracks up to 0.4 mm ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(C...
Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 m² and upto 16.80 m² in the area including cost of materials, labour, usage charges of...
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer- in- charge, (area of grill to be measured) including cost of mat...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at join...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...
Construction of M40 Grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base in recommended proportions, coarse and fine aggregate conforming to IS 383:2016, maximum...
Supplying, fitting and placing Mild Steel Reinforcement complete as per drawing and technical specification (SR 23-24 ,Vol-I (P-18/2.12)
Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...
Hydraulic Excavator of 0.9 m3 bucket for dispose the unwanted debries Loading SR23-24, (Vol 1 p n A-44 / Sl no 49)
Tipper-10 m3 for dispose the unwanted debries Loading SR23-24, (Vol 1 p n A-47 / Sl no 121)
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...
Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made o...
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...
Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...
Vaccum de-watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of. generator, HOM of machinery, Screed Vibratory, Power Floater, blade a...
Providing and laying Reinforced Cement Concrete pipe light dutyNP2 for culverts, roadway utilities& crossingsas per IS 458:2003in Single row including pointing ends and fixing collars withcement morta...
Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 5...
Supplying, fitting and placing Mild Steel Reinforcement complete as per drawing and technical specification (SR 23-24 ,Vol-I (P-18/2.12)
Providing and laying 150 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete. (Pg-163/V-3/6)
Road marking with hot applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface /Concrete Surfac Providing and laying of hot applied thermoplastic compound 2.5 mm thick incl...
Providing and laying 60mm thick factory made cement concrete paver
block of approved shape and colour of M -30 grade made of C&D waste
by block making machine with vibratory compaction laid in requi...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and fixing Structural Steel work riveted, bolted or welded inbuilt up sections, trusses and framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approv...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
3.1 301 Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work (SRP V3 15/3.1)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Earth work excavation by manual means for drains,canaIs, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi...
Earth work excavation by manual means for drains,canaIs, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel ...
Providing and constructing load bearing wall with Solid Concrete blocksof size 400x150x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185...
Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes m...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of ap...
Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes of 150mm dia conforming to IS : 13592 Type A, including jointingwith seal ring conforming to IS : 5382, leaving 10 mm gap for ...
Constructing brick masonry chamber for underground C.I. inspectionchamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internaldim...
laying different gradation of metal in sludge tank including complete as per direction of Engineer incharge 53 mm size metal Vol 1, (A-38/8 )
laying different gradation of metal in sludge tank including complete as per direction of Engineer incharge 40 mm size metal Vol 1, (A-38/8 )
laying different gradation of metal in sludge tank including complete as per direction of Engineer incharge 20 mm size metal Vol 1, (A-38/8 )
laying different gradation of metal in sludge tank including complete as per direction of Engineer incharge 6 mm size metal Vol 1, (A-38/8 )
Painting wood work with Deluxe Multi Surface Paint of required shade.Two coat applied @ 0.90L/10 m² over an under coat of primer [email protected] L/10 m² of approved brand and manufacture to give an eve...
Engaging Labour to fill different gradation of metals to sludge tank in layer by layer (SR2023-24, VOL 1, P-A 49/ II)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer ...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) tobrick/stone masonry including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including...
C.I. cover and frame 300x300 mm inside SR 23-24 ,Vol-II (P-A-16/ 153)
Earth work excavation by manual means for drains,canaIs, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi...
Earth work excavation by manual means for drains,canaIs, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...
Providing and Applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certif...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...
Providing and fixing Structural Steel work riveted, bolted or welded in
built up sections, trusses and framed work, including cutting, hoisting,
fixing in position and applying a priming coat of appro...
Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with supe...
Providing White washing with lime to give an even shade :New work (three
coats) with lime of approved quality, including cost of materials, labour
complete as per specifications and as per directions ...
Applying priming coats with primer of approved brand and
manufacture, having low VOC (Volatile Organic Compound) content.
With water thinnable cement primer on wall surface having VOC content
Providing and fixing flush door shutter made out of solid core block board
type, well seasoned , chemicaly treated hard wood battens and internal
frame with minimum 45 mm wide wooden frame alround doo...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi
chambered UPVC (Matching to RAL-9016) sections and with minimum
TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :Two coats on new work after
thoroughly brooming the surface to remove all dirt, dust, mortar drops
Painting with oil type wood preservative of approved brand and manufacture
:New work (two coats) to give an even shade including preparing
the surface after thorougly cleaning oil, grease, dirt and fo...
Applying priming coats with primer of approved brand and
manufacture, having low VOC (Volatile Organic Compound) content.
With ready mixed pink or grey primer on wood work (hard and soft
wood) having ...
Providing and laying Polished Glazed Vitrified tiles with thickness 10
mm in floor with different sizes with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufactur...
Grouting the joints of flooring tiles having joints of 3 mm width, using
epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10
kg of hardener and 0.20 kg of resin per kg), includi...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand) (SRP/2023-24/V2/9/5.4)
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to
brick/stone masonry including rounding off corners wherever required
smooth rendering, providing and removing scaffolding, includi...
Providing Flush/ Ruled pointing on stone slab ceiling with cement mortar
1:2 (1 cement : 2 fine sand) after raking joints to depth nicely lining,
including cost of materials, labour, curing as per spe...
1.11 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations
and other similar works etc. in layers not exceeding 20cm in depth, consolidating
each deposited layer by ramming...
Providing and fixing suitable plaster mesh 100mm wide manufactured
out of hot dipped galvanised iron of nominal thickness 0.35mm with a
zinc coating of 120g/m2 width, along route of walls chipped for ...
Forming groove of uniform size in the top layer of plaster as per approved
pattern including repair to the edges of panels and finishing the groove
complete as per specifications and direction of the ...
Providing patti alround door , window parapet
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
2.1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, d...
Fencing with G.I. barbed wire R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and e...
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge Asbestos cement sheet (SR 2023-...
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking to the appro priate disposal area as per direction of Engineer-in-charge.(SR 2023-24 ,vol II...
Demolishing R.B. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-ccharge.(SR ...
Dismantling tile work in floors and roofs laid in cement mortar includ ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge For thickness of tiles above 25 mm...
Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...
Engaging Labour for Removing Doors and Windows ,Ventilaters From Walls Aluminium Partition Etc and stack the same as directed by Engineer incharge (A49/ II Skilled )
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge(P-187/19.2.1)
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(P...
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of E...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,
including over burden upto 20M, fixing of casing pipes, col...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,
including over burden upto 20M, fixing of casing pipes, col...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,
including over burden upto 20M, fixing of casing pipes, col...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,
including over burden upto 20M, fixing of casing pipes, col...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,
including over burden upto 20M, fixing of casing pipes, col...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and
latest ammendments, electrical resistance welded steel tubes, m...
Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for
covering one end shall be 3mm (minimum). The dimensi...
Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness
of plate used for covering one end shall be 3mm (minimum)...
Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS
or P.W.S.S, by vertical electrical sounding by adopting Venner o...
FIRE PUMP ROOM AND EQUIPMENTS Supply,Erection, testing & commissioning of electrical motor driven end suction back pull out centrifugal pump capable of delivering adequete LPM at required head. When r...
Supplying,installation,testing & commissioning of diesel engine driven pump horizontal mounted, Horizontal splitcase centrifugal single stage pump .capabel of delivering required flow at required hea...
Supplying, Installing testing and commissioning electrically driven jockey pump of capacity 180.0 Lpm at required head end suction type bronze impeller pump oupled to electrical driven motor with su...
Supplying,errection and commissioning of Fire Fighting panel cubicle type made out of 14/16 SWG MS CRCA sheet which is derusted, degreased, phosphated and passivated with angle iron skelton or sheet f...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 50 S...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.
L T Cable. CSR 2023-24. SRP 52 of 18, 175/21.06.
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.16 SQ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.
L T Cable. CSR 2023-24. SRP 52 of 18, 174/21.05.
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC...
2 mm thick perforated cable G I tray with on existing M S angle support using necessary G I bolts /nuts and washer or welding as required.150 X 50mm. BIS Approved make.
G I Strips for grounding connections, using necessary fixing materials as required.25 X 6mm
G I Strip. CSR 2023-24. SRP 54 of 105, / 12.58.3.
Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting we...
200 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.2.
150 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.3.
100 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.4.
80 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.5.
50 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.7.
25 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.10.
Supplying and installing testing and commissioning of C I "Y" stainer confirming to IS standard with necessary bolts and nuts complete includes cost of all materials labour charges with all lead & li...
100 Dia "Y"Stainer.CSR 2023-24. SRP 93 of 105, / 15.129.3. Make:KARTAR/ NVR.
Supplying and installing testing and commissioning of PN 16 C I "Non Return Valve" confirming to IS 13039 with necessary bolts and nuts etc complete includes cost of all materials labour charges wit...
Supplying and installing testing and commissioning of PN 16 C I butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc, complete as per specification with all lead and lift, load...
150 mm dia C I Butterfly Valves. CSR 2023-24. SRP 94 of 105, / 15.127.2.
100 mm dia C I Butterfly Valves. CSR 2023-24. SRP 94 of 105, / 15.127.3.
80 mm dia C I Butterfly Valves. CSR 2023-24. SRP 94 of 105, / 15.127.4.
50 mm dia C I Butterfly Valves. CSR 2023-24. SRP 94 of 105, / 15.127.6.
Supplying and installing testing and commissioning of PN 20 Rating Flexible Rubber Bellows, sunle arch complete withpair of S S Flanges, nuts, bolts and gasket etc, 200 mm dia.
Make: EASYFLEX/...
150 mm dia - do-
100 mm dia -do-
Supplying and installing testing and commissioning of Air Vessel tank of min capacity of 100 ltr.
Supplying and installing testing and commissioning of Gun Metal Ball Valve Size of 19/20mm dia including cost of materials, labour, usage charges of machinery complete as per specifications, comple...
25 MM dia -do- CSR 2023-24. VOL-6, SRP 94 of 105, / 15.126
Supplying and installing testing and commissioning of Pressure switches of suitable range for pumpsets with fittings like Unions/ Collors/ reducers etc. Make:DANFOSS/ INDFOSS.
Supplying and installing testing and commissioning of Pressure gauges, glyserine filled of suitable range 150mm dia with syphone tube, syphone cock , fitttings etc. complete.
Supplying and installing testing and commissioning of air release valve, 25mm dia threaded type.
Supply, fabrication and errection of M S Supports as per approved design & drawing consisiting of channels , angles of appropriate sizes as required.
FIRE HYDRANT & SPRINKLER SYSTEM:Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions, Flanger, N...
150 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.3.
100 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.4.
80 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.5.
65 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.6.
50 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.7.
40 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.8.
32 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.9.
25 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.10.
Wraping & Galing of U/ G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth, including cost of materials, labour usage charges of machinery complete a...
80 mm dia -do- CSR 2023-24.VOL-6, SRP 91 of 105 /15.98.4.
Supply, Installation testing and commissioning of Hydrants points comprising of the following:Make: SAFEPRO / EQ. FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm mm dia sin...
Supplying Installing, testing and commissioning of Reinforced Rubber Lined RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female lnstantainious Gun metal c...
63 X 20mm S S Short branch pipe Nozzle, ISI Marked confirming to IS 903:1993 suitable for connection fire hose pipe coupling as complete in all respect.
M.S. Pressed reel of 600mm dia swinging type motion which allows a 180 swing and conforms to IS:884/85 or Aluminium fitting Single Piece Compact Type. including cost of materials, labour, usage char...
Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at out...
Supplying and installing testing and commissioning of 150mm dia 4 way Fire brigade inlet connection with Non return valve of 4 nos 63 mm dia including cost of materials,usage charges of machinery c...
Supplying Installing, testing and commissioning of pendent Type / Upright Type Standard Response , Standard Coverage, Sprinkler , K 5,6 (80),1/2" NPT, 68 degrees centegrad FIRE complete Chr...
Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. Comp...
Supplying Installing, testing and commissioning of Gun Metal Ball Valve size of 25mm dia including cost of materials, labor, usage charges of machinery complete as per specifications complete. Make:...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing fixing in position and applying a priming coat ...
FIRE ALARM & DETECTION SYSTEM- CONVENTIONAL.Supplying Installation testing and Commissiong of Micro precess base Fire alram Control panel having power regulation Circuit, which conner to 230 AC to...
Supply Installation testing & Commissioning of conventional type photo/Heat electric smoke sensor with flashing LED capable of woking at 9V to 33 V DC .The Optical Smoke Detector is unaffected by wind...
Supplying Installing, testing and commissioning of Resettable type Manual Call point . works on 24V DC LED indicator with glass Fronted. Fire Symbol .The red Manual Call Point is approved to EN5...
Supplying Installing, testing and commissioning of 1 KM range notorised Siren with required relay module and accessories complete. The Siren will require A C Current supply.
Supplying & drawing of 2 Core 1.5 SQmm copper conductor armoured cable.
FIRE EXTINUISHERS:Supply and Installation of 4.5kG , CO2 gas valve type Fire Extinguisher, Trolley Mounted, Easy Weight management used Unused Mechanism, Gross Weight 19.1 Kg empty weight. 14.6 kG C...
Supply and installation in position, testing and commissioning 6 kG Fire Ex tinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 ...
Providing 9kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 14.90 Kg, empty weight 5.90 Kg, Can Height 615MM...
Supply, installation of Mechanical Foam type fire extinguisher with wall mounting bracket etc, Complete, confirming to IS 15683. 9 ltr capacity.
45 ltr Capacity, trolley mounted. Make:SAFEPRO / EQ.
Supplying of 4 Nos sand buckets with handle, round bottom type, 9 lts capacity. Painted red outside and white inside with letters "F I R E" in black written out side,mounted on M S fabricated st...
SIGNAGES Providing & fixing SIGNAGES of suitable size made of PVC rigid sheet 3 mm thick computer cut PVC non reflective self adhesive imported vinyl painted on the front of PVC rigid sheet complete ...
Providing & Fixing signage board of "FIRE ORDER" on 5 mm thick "Opaque" PVC foam board of computerised cut, PVC non- reflective self ashesive vinyle painted foam board.
Open Conduit System:-Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted ...
Open Conduit System:-Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick. mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverte...
Concealed Conduit System:-Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runn...
Concealed Conduit System:-Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runn...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...
Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 12" x 12" x 3" ...
Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 12" x 9" x 3" (...
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall SR-...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required 20mm SR-2023-24 P...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required 25mm SR-2023-24 P...
Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...
Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...
Supplying And Fixing "S" Hook made out of 14 mm dia M.S. Rod. SR-2023-24 P-3 /1.11
Supplying And Fixing M.S. Rafter Clamp Set made out of M.S.Flat & 14 mm M.S. rod. SR-2023-24 P-3 /1.12
Supplying And Fixing Metal Fan Box with Round Hook SR-2023-24 P-3 /1.13
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wir...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and drawing PVC insulated flexible copper wire of approved make as per IS: 694: 2010 14/0.0040" SR-2023-24 P-5 /2.4.1
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virg...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch SR-2023-24 P-8/3.6.1 Make: Anchor/GM/Cona/Salzer/Lis...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Two Way Switch SR-2023-24 P-8/3.6.2 Make: Anchor/GM/Cona/Salzer/Lish...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Three Way socket SR-2023-24 P-8/3.6.3 Make: Anchor/GM/Cona/Salzer/L...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two Module SR-2023-24 P-8/3.6.4 Make: Anchor/GM/C...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16A One Way Switch SR-2023-24 P-8/3.6.7 Make: Anchor/GM/Cona/Salzer/Li...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Bell Push SR-2023-24 P-8/3.6.8 Make: Anchor/GM/Cona/Salzer/Lisha.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32A DP Switch SR-2023-24 P-8/3.6.9 Make: Anchor/GM/Cona/Salzer/Lish...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6/16A Universal Socket SR-2023-24 P-8/3.6.10 Make: Anchor/GM/Cona/S...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 RJ45/I.O Outlet Cat-6 SR-2023-24 P-8/3.6.12
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws SR-2023-24 P-8/3.8
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. SR-2023-24 P-8/3.9
Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 60mm SR-2023-24 P-8/3.10.1
Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 80/90 mm SR-2023-24 P-8/3.10.2
Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 110 mm SR-2023-24 P-8/3.10.3
Supplying ......way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws. 2 to 4 Way Gang Box SR-2023-24 P-8/3.12.2
Supplying ......way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws. 6 to 10 Way Gang Box SR-2023-24 P-8/3.12.3
Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorros...
Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400...
Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor up to 5 kVAR .SR-2023-24 P-13/5...
Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor 6 to 10 kVAR .SR-2023-24 P-13/5...
Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor 11 to 20 kVAR .SR-2023-24 P-13/...
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. SR-2023-24 P-20/5.47
Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours &70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power...
Supplying of recess mounting non integral type ........ LEDw luminairecomprising of pressuredecast/extrudedaluminiumhousing, withspring adedfalseceilingclamps,PowerLEDswithCCT6500 degreeK,CRI70%. effi...
LED Streetlight 90W Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with In...
Floodlight 70W Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injecti...
Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Remote SR-2023-24 P-47/12.2.3
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip SR-2023-24 P-53/12.58.2
GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm Copper strip SR-2023-24 P-53-54/12.58.7
GI/Copper strips for grounding connections, using necessary fixing materials as required. 600 x 600 x 3 mm Copper plate SR-2023-24 P-53-54/12.58.11
Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is noncorrosive, thermally conductive, potential to permissible limits, superior F...
Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / ...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires SR-2023-24 P-55/13.5
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters /girders using 23/0.0076" twin twisted PVC insulated wires, re...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existingwall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Erection charges for fixing a ... litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for hrough bolts and nuts and washers with 150x450x600mm ...
Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor upto 5 kVAR 2023-24 P-56/13.17.1
Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor 6 to 10 kVAR 2023-24 P-56/13.17.3
8 Fixing of ..... A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling. 15A to 63A TPST 2023-24 ...
8 Fixing of ..... A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling. 100A to 250A TPST 2023-24 ...
Supply and installation of 9kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 14.90 Kg, empty weight 5.90 Kg, Can Height 615MM, Diameter 175M ...
Supplying of four bucket stand alongwith buckets. Complete SR- 2023-24 P-34/15.111
Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinerycomplete as per specifications. SR- 2023-24 Chapter-15 P-3...
Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board. 6A Batten Holder SR-2023-24 Volume-6 P-10/3.14.7
Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 200A SR-2023-24 P-14/5.12.4
Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25A SR-...
Supplying and fixing FOUR Pole 100 A 25kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring ...
Supplying and fixing FOUR Pole 125 A 25kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring ...
Supplying and fixing FOUR Pole 125A/2=62.5 A=63A 25kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
Supplying and fixing FOUR Pole 200 A 25kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring ...
Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suita...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3...
Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3...
Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage cur...
Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. SR-2023-24 P-17/5.22
Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT SR-2023-24 P-17/5.26
Supplying, fixing and wiring rotary selector switch suitable for Ammeter SR-2023-24 P-17/5.27
8 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter SR-2023-24 P-18/5.28
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. SR-2023-24 P-18/5.34
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. SR-2023-24 ...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. SR-2023-24 P-18/5.38
Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor eration, relays LED display, self programming function for power...
Supplying .100 A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which...
Supplying .250 A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which ...
Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Fabricating supplying and mounting MS box made out .16.SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sqmm...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqm...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 35 Sqmm...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 95 Sqmm...
Heavy Duty Copper Terminal Long Barrel : 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm SR-2023-24 Voume-6 P-26 of 81/59.01
Heavy Duty Copper Terminal Long Barrel : 35 Sqmm Copper Terminal, Apprx Wt: 17 Gm SR-2023-24 Voume-6 P-26 of 81/59.02
Heavy Duty Copper Terminal Long Barrel : 50 Sqmm Copper Terminal, Apprx Wt: 26 Gm SR-2023-24 Voume-6 P-26 of 81/59.03
Heavy Duty Copper Terminal Long Barrel : 70 Sqmm Copper Terminal, Apprx Wt: 38 Gm SR-2023-24 Voume-6 P-26 of 81/59.04
Heavy Duty Copper Terminal Long Barrel : 95 Sqmm Copper Terminal, Apprx Wt: 58 Gm SR-2023-24 Voume-6 P-26 of 81/59.05
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staf HT Cable 3x95 to 150 Sqmm SR-2023-24 Volume-6 P-52 Item ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staf LT Cable 2.5 to 25 Sqmm SR-2023-24 Volume-6 P-52 Item No-...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staf LT Cable 35 to 95 Sqmm SR-2023-24 Volume-6 P-52 Item No-2...
Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. SR-2023-24 P-18/5.35
Supplying and fixing of metal clad industrial plugs and sockets 2pole+earth 250V PLUG 16A SR-2023-24 P-8/3.13.1
Supplying and fixing of metal clad industrial plugs and sockets 3pole+earth 440V PLUG 32A SR-2023-24 P-8/3.13.4
Providing, laying and jointing 63mm dia HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and onveying to work site including loading and unloading at both destinat...
Bescom SR/SSM 11KV/88/12.04:Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 63 kVA, Aluminum Wdg, Star 2 (5 Star)
Bescom SR/11KV Labour/72/8.01: Erection of 25 to 63 kVA Transformer on Transformer Structure
Bescom SR/SSM 11KV/289/41.01: Load Break Switch with Panel
Bescom SR/SSM 11KV/1/1.01:RCC Pole - 9 Mtr Long, 145 Kg WL
Bescom SR/11KV Labour/30/2.02:Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth
Bescom SR/SSM 11KV/11/2.01:11 kV, Horizontal Cross Arm - Mild Steel (MS)(Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018)
Bescom SR/11KV Labour/51/5.03:Fixing of V-Shape/Horizontal cross arm including Single Top Support Brace and Insulator fixing
Bescom SR/SSM 11KV/47/6.01:11 kV Ceramic Pin Insulator (Shell only)
Bescom SR/SSM 11KV/55/6.09:DISC Insulator 45 kN Porcelain
Bescom SR/SSM 11KV/166/24.01:11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018)
Bescom SR/11KV Labour/97/13.02:Fixing of GOS including wiring (11 kV Single Break 200 Amps)
Clamps A Type (MS & GI) as per IS-1977Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator
Bescom SR/11KV Labour/58/5.10:Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Exclu...
Bescom SR/SSM 11KV/137/19.01: 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR (Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007)
Bescom SR/11KV Labour/101/13.06:Fixing of 3 Nos Lightning Arrestor including wiring
Bescom SR/SSM 11KV/139/20.01:11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018)
Bescom SR/11KV Labour/96/13.01:Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring
Bescom SR/SSM 11KV/59/7.02:Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM
15Supplying of four bucket stand alongwith buckets. Complete
15.117Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick.complete including cost of materials, labour, usage charges of machinery complete as per specifications.
15.113Supplying of Hand gloves. complete
15.114Supplying of first aid box. complete
15.116Supplying of FIRST AID CHART with lamination. Complete
Bescom SR/SSM 11KV/593/68.17:Caution/Danger Board
21-22/Vol-4/Part-B/Lift Irrigation/4.41:Providing and fixing chain link fencing consisting of 3 m long 65 x 65 x 6 mm M.S angles with top 50 cm bent at 30 degree to vertical fixed at 2.5 m intervals i...
5.20.2Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.
Do- 63 Amps 4 pole (5.20.3)
PWD SR/Vol-2/11.16.1:Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying ...
12.57Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer f...
Bescom SR/SSM 11KV/61/8.02:8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM
Vol I/1.14.1:Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadin...
Vol V/191/16.9:onstructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with ...
Vol II/09/5.4:(Size stone masonry) Construction of Platform with size stone, cement concrete for errection of Transformer/Metering Cubicle /Heavy equipment. Construction of platform [1.5m x 1.5m x 1.2...
LED Streetlight 90W Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with In...
upplyofLEDfloodlightluminairewithpressurediecastaluminiumhousingbodyforoptimalthermaldissipation.LampcompartmentcomprisingofantiglarecleardiffuserwithInjectionmouldedpolycarbonate/clearglassmaterial,d...
Supplyingfixingandwiringearthelectrodeforgroundingoflifts,transformers,DG setsetc. using 40mmdia2.9mm thick2.5m long GIpipe with GIfunnel withmeshandsuitablesizereducerfixedonthetopoftheearthelectrode...
GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip SR-2023-24 P-53/12.58.2
GI/Copper strips for grounding connections, using necessary fixing materials as required. 600 x 600 x 3 mm Copper plate SR-2023-24 P-53-54/12.58.11
Supplying and running Copper conductor for gorunding and(along with other wires in conduit system of wiring)Using necessary suitable size clamps,nails, guttas/spacers etc, 8SWG Copper wire(Ele SR 2019...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires SR-2023-24 P-55/13.5
SupplyingandFixing........mmdiaclampsssAGIpipebracketupto2.7meterslongterminatedwithareducingcollarof40x25mmtowhichextrapipeof175mmlengthisfixedforfixingMV/SV/MH/FTLstreetlightfittingofallcapacitieson...
Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40 A S...
Fabrication,Supplying,Erection,TestingandCommissioningof......mslongPolygonhighmastwithSingle/Multipletelescopicsectionshaving,(minimumoverlapdistanceof1.5timesoftopsection)thicknessasperBSEN10025grad...
Fabricating,supplyinganderectingSwagedtubularPoleofheight...mhavingthreesections,andprovidingtwocoatsofredoxidepaintandfinishedwithtwocoatsofenamelledpaintofapprovedqualityandcolourandM.S.baseplateofs...
Supplying,andfixingofHotdipGalvanizedM.S.BracketsuitableforoutdoorluminariesandmountedonOctagonalpoleusingnecessarybolts, nuts etc., complete. Single Arm Bracket with 1000 mm Standard 40/50 mm dia (4....
Supplying,andfixingofHotdipGalvanizedM.S.BracketsuitableforoutdoorluminariesandmountedonOctagonalpoleusingnecessarybolts, nuts etc., complete.Double Arm Bracket with 1000 mm Standard 40/50 mm dia(4.6....
ETP Motors Supplying of Three phase 2HP Submersible Raw water Sewage /mud pumpsets 5M3/hr capacity & 7.5 mtr Head pump sets. CI. (NWKRTC Approved Rates)
Supplying of Three phase 2HP SubmersibleFilter Feed pump sets 5M3/hr capacity & 15 mtr Head pump sets.CI. (NWKRTC Approved Rates)
Supplying of Three phase 2HP Submersible Aerator pump sets 15M3/hr Air capacity .CI.
(NWKRTC Approved Rates)
Supplying, Installation and Commissioning of Dual Media Filter with multi port valve & Required media. (NWKRTC Approved Rates)
Supplying,&fixing of DANGER BOARD madeout of MS Sheet metal with two coats of non corrossive enamel Paint(PWD Ele SR 2010-11 SRP 66/12)
Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinerycomplete as per specifications. SR- 2023-24 Chapter-15 P-3...
Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorros...
Panel board units with all necessary materials and labour tools and equipments including cement concrete for foundation bed etc complete asper specification with testing of as per instructions of eng...
ACTVATED SAND FILTERS :Providing and fixing of 0.8 m dia pressure sand filter comprising of 5 mm thick 0.8 m dia shell joined with 10 mm thick M S flanges and Air vent pipe with gate value graded filt...
BELT SKIMMER : Providing and fixing of BELT SKIMMER with 5 LPH tray with complete arrangement for skimming out oil etc complete ---- including all lead and lifts as per the direction of engineer in ch...
Pressure Sand Filter: Providing and fixing of 0.8m dia pressure sand filter comprisig of 5mm thick 0.8 mm dia shell joined sand with gate valve graded filter media comprising of sand pebbles grit etc ...
Dozing Pumps with tanks providing fixing of poly electrode dozing tnaks comprising of 100 litres capacity LDPE tank with electronic metering pump complete.. KSRTC Approved rate
Pre-flter of PVC material with a height of 500mm and 300mm dia with 10mm perforated holes and bifurcated with ss sheets(3mm thickness) of 8mm holes MS handle and base(PWD Vol-v/p-263/22.2)
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip SR-2023-24 P-53/12.58.2
GI/Copper strips for grounding connections, using necessary fixing materials as required. 600 x 600 x 3 mm Copper plate SR-2023-24 P-53-54/12.58.11
Supplying and running Copper conductor for gorunding and(along with other wires in conduit system of wiring)Using necessary suitable size clamps,nails, guttas/spacers etc, 8SWG Copper wire(Ele SR 2019...
Oil skimmer Grey water is connected to oil skimmer with 1 HP motor.Capacity tank of 1200mmx1200mmx2200mm(PWD Vol-V/P-263/22.2)
Aeriator Air blower with motor 2 HP and aeration tank diffuser and PVC Pipe line is provided for aeration tank(PWD Vol-V/P-263/22.2
Filter Normal Flow-3500LPH, Filtering Media Graded Pebbles/sand, MOC-MS Height-1265 mm diameter of 450mm, Minimum Pressure 2.0Kgcm2 Maximum pressure 3.5Kg/cm2 Bursting Pressure 10Kg/cm2, Valve Butter...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw4 Davanger EV Final.pdf
Others - Bid Document • 0.52 MB
Annexure B.docx
Others - Annexure-B- Bid Capapcity • 0.01 MB
PDF Tender notification.pdf
Others - Tender Notification • 3.59 MB
annexure A.docx
Others - Letter of Credit- Annexure-A • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].