REPAIR/MAINT WORKS AT CERTAIN MD ACCN

Amount

S&F in repair Air termination, single pointed. Aluminium rod 12mm dia and 300mm long, fixing over 1.5mm dai GI light grade pipe of ht 1.5 m with nut and bolt after taking down exisitng one complete all as specified and directed.

S&F in repair Air termination, single pointed. copper rod 12mm dia and 300mm long, fixing over 1.5mm dai GI light grade pipe of ht 1.5 m with nut and bolt after taking down exisitng one complete all as specified and directed.

S&F in repairs Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.

Taking out old unserviceable copper earth strip and M&L for earth continuity conductor of 20 x 3.15mm copper strip fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc, complete all as specified and directed.

Taking out old unserviceable iron earth strip and M & L for earth continuity conductor of 32 x 6mm galvanised iron strip fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc, complete all as specified and directed.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4mm dia galvanised iron or steel wire, taking down exisitng one etc, complete all as specified and directed.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x3mm dia aluminium strip, taking down exisitng one etc, complete all as specified and directed.

M&L for brazing/gas welding for existing copper earthing strip joints by removing nuts and bolts complete all as specified and directed.

S&F galvanised steel tubes light grade, with all fittings and fixed complete to walls and ceiling or laid in floors/ PCC Foundation pillar complete all as specified and directed for the 25 mm bore complete all as specified and directed.

M&L for making holes in brick/stone/PCC block wall masonary in building for passing of earhting strip incl making good to match existing surface complete of size (100x100x250) mm complete all as specified and directed.

Taking out old u/s LDPE pipes and S&F low density polythelene pipes (LDPE) 40mm dia for insulation of earth strip from building at entry points complete all as specified and directed.

Taking out old unserviceable porcelain ceramic insulator and S&F white porcelain ceramic insulator with nut, bolt and washers for fixing earthing strip on wall/ceiling/roof complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded agregate for PCC of size 0.25m x0.25m x 0.25 m cube with MS ferule for mouting GI pipe 25 mm dia etc, complete all as specified and directed.

S&F LED light fitting 1x8 watt flame proof CMRI certified recommended for gas .vapor group of ii & iii B, Zone 1&2 and IP 65 Protection with die cast aluminium housing with heat resistance toughened glass with LED tube light fixtures driver ,holders connector etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

S&F LED light fitting 2x8 watt flame proof CMRI certified recommended for gas vapor group of ii & iii B, Zone 1&2 and IP 65 Protection with die cast aluminium housing with heat resistance toughened glass with LED tube light fixtures driver ,holders connector etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

S&F switch flame proof rotary type with termination box in LM 6, 25 Amp single pole 250 Volt complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using galvanised iron strip 25×4mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using galvanised iron strip 32×6mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost.

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP (BID ID -3110133)

ANSH CONSTRUCTION (BID ID -3110239)

UNIQUE ENTERPRISE (BID ID -3110301)

Jaibalaji Enterprise (BID ID -3110453)

BISWAS ENTERPRISE (BID ID -3110506)

M/S S M ENTERPRISE (BID ID -3110474)

M/s sadhan kumar mukherjee (BID ID -3110578)