Construction of open security huts in Farm area (02 nos)

Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m , as directed by Engineer-in-charge: All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level: 1;5;10 (1 cement : 5 coarse sand (zone-III) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources).

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: .1 New work (two or more coats) over and including water thinnable priming coat with cement primer

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

12mm cement plaster: 1:4 (1 cement : 4 fine sand)

P/F MS pipe Column 4” dia 70 ft Length & 2” dia for roofing including accessories and labour etc

P/F MS ISI mark coloured corrugated Sheet 14 ft x 3.5ft 0.5mm thick 20 kg

P/F cement concrete coloured Benches of Length 4ft

Fabrication of MS Plate 8”x8” Thickness 25mm

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: .1 Two or more coats on new work

P/F Polycrtstline 165-170W Solar PV module Panel (Vmax= 18-19V, Imax= 9A) IEC Standards and BIS certified, including installation, testing and commissioning etc as required

P/F Pure sine wave MPPT Solar Inverter 850-1100VA/12V IEC Standards and BIS certified including installation, testing and commissioning etc. as required

P/F Solar Battery 12V, 150AH, IEC Standards and BIS certified including installation, testing and commissioning etc. as required

P/F LED Blub 12W, 240V Including connections and testing etc. as required

P/F Ceiling Fan (White) 1200 mm, 3 Aluminium blade Including installation, testing and commissioning as etc. required

P/F 4 sq mm XLPE Copper Solar DC Cable including connections as etc. required

P/F Solar Panel Iron Stand including installation complete as require etc.

P/F Modular stepped ceiling fan regulator, 1 module Including connection and testing etc. required

P/F 6 Amp Modular socket Including connection and testing etc. required

P/F 6 Amp Modular switch Including connection and testing etc, required

P/F 6 Modular PVC Gang Box including fitting etc as required

P/F 3 Modular PVC Gang Box including fitting etc as required

P/F Bulb holder including fitting etc as required

P/F 1.5mm PVC insulated copper conductor single core cable (Red=20m and Black=20m) including fitting and connection etc. as required

P/F 25 mm PVC Pipe including fitting etc. as required

P/F 25 mm PVC clump including fitting etc as required

P/F Black screw 1.5 inch including fitting etc as required

P/F 1.5” wall gitti packet including fitting etc as required

P/F 20 Amp Switch type MCB Including connection and testing etc. as required

P/F Inverter and Battery Iron Stand including installation complete as required etc.

Avyan Construction (BID ID -3157756)

INDO MEP CONTRACTOR AND ENGINEERS (BID ID -3151324)