Providing Galvalume sheet roofing over A2 block Govt. Servants Quarters, Mundock, Mahe

Amount

Code No.4.1.3:- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Cde No. 4.3.3:- Centring and shuttering including strutting , propping etc. and removal of form work for - columns, piers, abutments, pillars, posts and struts

Code No. 10.25.2:- Steel work welded in built up sections framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

Code No. 12.51.1:- Providing and fixing precoated galvanised steel sheet roofing accessories 0.5mm (+0.05%) total coated thickness , zinc coating 120 grams per sqm as per IS: 277,

Code No. 12.51.6:- Providing and fixing precoated galvanised steel sheet roofing accessories 0.5mm (+0.05%) total coated thickness , zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and

Code No. 31.160.1I:- Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends, tees, threaded pieces, couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 110mm dia.

Code No. 31.168.1I:- Providing and fixing in position UPVC moulded elbow (Finolex / jain)(1 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110mm dia

Code No. 12.80:- Providing and fixing colour coated galvalume sheet of 550 M.P.A. yield of AZ 150 strength formed as per patterned steel rib profile with the depth of 31 mm pitch of 250 mm and overall width of 1060 mm and thickness 0.5mm with required J or C hook bolts and nuts 8mm dia G.S.paint and working etc., complete excluding the cost of purlin , rafter and truss etc.,

Code No. 13.1.1:-12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand)

Code No.13.61.1:- Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work

GIRIJA P

Krishna kumar