WBPWD/EE/JED/eNIQ9/2022-23

Amount

Part A Report for Anatomy Dissection Hall at proposed first floor on newly constructed Police Morgue

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish

Average Run= 9 mtr

Distn. wiring in 3x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish

On board

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A,SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl.S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

L&T (2+14 way) Enclosure (LTSD14N) [Mke-L&T /ABB/Schneider/Legrand)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

L&T(LTTD06N) make 6 way Enclosure (LTSD14N) [Mke-L&T /ABB/Schneider/Legrand)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection

(L&T make ) 250v 40 A DP (LTSD14N) [Mke-L&T /ABB/Schneider/Legrand)

(L&T make ) 415 v 63 A FP (LTSD14N) [Mke-L&T /ABB/Schneider/Legrand)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C haracteristics on din rail of existing DBs and necessary connection

(L&T make )6-32A (LTSD14N) [Mke-L&T /ABB/Schneider/Legrand)

Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box.

Cutting Channel of size(43 mm x 43 mm/ 40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25/19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles

25 mm dia 3 mm thick polythene pipe with out earth continuity wire

19 mm dia 3 mm thick polythene pipe with out earth continuity wire

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated &unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

3 x 22/0.3 (1.5 sqmm)

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

2 x 84/0.3 (6.0 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

4x126/0.4 (16 sqmm) + 2x86/0.4 (10 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991)

4 bar, 415 V, 415 A, 4 x 65x13mm 85 mm long Aluminiumr bbc with sheet metal box 500x150 mm

Supplying and fixing 415V,160 Amp TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. ( Make L&T)

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

S& delivery of 4core 70 sqmm Al/A XLPE 1.1kv grade cable(make: Polycab/havells/KEI) [For DG Set]

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Laying of cable 4 core 70 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Supplying & fixing 65mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4core 70 sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

4core 70 sqmm

S& delivery of 4core 95 sqmm Al/A XLPE 1.1kv grade cable(make: Polycab/havells/KEI) [From Substation to Anatomy Building]

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Laying of cable 4 core 95 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Supplying & fixing 65mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4core 95 sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

4core 95 sqmm

supply & delivery of the following items ( FAN & FITTINGS):-

250V LED batten fittings [Make - Phillips cat no; BN 100 C LED 40S-6500 PSU L120GR / havells/Wipro/Crompton as per choice of EIC.

LED bulk head light fitting (Philips cat no.-WT202W LED6S NW PSU S2 PC/ CG cat no.- LBHE-10-CDL / Havells/Wipro/Crompton as per choice of EIC

AC celing fan 250 v 1200 mm sweep ( Orient Quasser/ Crompton STAR 220/ Usha striker plus)

AC exhaust fan of 250 v 230 mm (Make-EPC) 1370 RPM heavy duty

250 V, 400 mm (16") cabin fan orient make, RPM-1290 minium (Make- EPC/Cinni/Orient)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: (23CM )

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire

Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type 125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For Al

23 cm Exhaust fan (9")

Earthing Work:-

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level.(make: ISI- medium)

Excavation of soil for installation of Earth Electrode and filling & ramming.(for morrum)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Extra for treatment of soil by using salt & charcoal or coke for plate electrode Item.

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI educer including drilling of 46 nos12 mm dia holes on the GI pipe

Glow Sign Board Work:-

S & F Glow sign board (8 ftx4 ftx6 inch ) made from 25X25X3 mm MS angle 4x3 mm MS flat having the provision for opening from front by 25x25 x 5 mm MS angle ( 3 no hinged duly welded the board should be ennclosed from outside by 20 SWG GI sheet expected the front the entire board should be painted with one coat synthetic enamel paint cover one coat of RO primer .The front facia of the board is to be made in 20 mm thick white PVC sheet of Export Quality having suitable size & to be fixed on the front structure by S&F suitable size aluminium angle SS screw the matter is to be encripted by on a whole best quality venile sheet as per approved size colour & matter which will be pested properly over the pvc sheet. S & F of 12 ( twelve) nos 4 feet 20 watt LED Batten ( Philips make ) incl. making entire connection with 3x1.5 sqmm stranded cupper wire through flexible pipe for proper illumination of the GSB from inside as per direction of EIC. ( Matter should be encrypted) in Bengali/English)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(2 no for body earthing and 2 for neutral earthing). ISI -Medium

Excavation of soil for installation of Earth Electrode and filling & ramming.For Morrum Soil

Supply and fixing of reliable EnduraLED Wellglass Highlumen Robust & reliable IP66 & IK08 protected LED Wellglass luminaire with PDC housing & Polycarbonate diffuser suitable foe wall & ceiling mounting application [Make-Philips BY201P LED78S CW PSU HE PC/equivalent make of Havells/CG] with suitable SS chain fixing from ceiling upto 3 mtr (as per direction of EIC) incl. Fixing of anchor fastner at Celing [For Dissection Table top lighting]

Supply & Fixing 80 mm dia 2 mtr long GI pipe pole (Medium Gauge) with 9'x9'x1/2 "MS sole plate welding with drilled hole at bottom on the pole incl. S&f 1.5 mtr long 40mm dia single G.I. medium gauge arm bracket with pole sleve suitable for above pole as per approved specification including S&F nut bolt washer & 1 no through bolt etc paintaing with two coats of aluminium paint after one coat of RO primer as per GS incl providing CC (6:3:1) muffing 600x600x760 mm in size of equivalent of cyndrical muffing ground

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

Supply and fixing street light (Make: Havells Endura Pearl Neo SL 90W LED 757/ Phillips BRP062 LED 84 CW SLC S1 PSU/ equivalent Wipro) on existing arm bracket incl. necessary fixing material as per requirement and mending goods damages to original finish.

S & installation of single phase Timer DB comprising of 2+12 way SPNMCBDB Enclosure 607712 ( Conceled in wall) , 32 A DP MCB , analog time switch ,32 A DP power contactor with suitable interconnection . ( Make: Legrand) [For AC Machine]

Dismantling the old minipole, area lights with loop box, cable etc (dismantled items to be deposited at concerned section office)

Part B Report for Old District Hospital for shifting of some in- patient service from Jhargram Super Speciality Hospital

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch(Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.(Avg run 10mtr)

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works

On board

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

L&T (2+14 way) Enclosure (LTSD14N)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

L&T(DHDPTHODRW04) make 4 way Enclosure

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection

(L&T make ) 250v 40 A DP

(L&T make ) 415 v 63 A FP

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C haracteristics on din rail of existing DBs and necessary connection

(L&T make )6-32A

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

3 x 22/0.3 (1.5 sqmm)

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

2 x 84/0.3 (6.0 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

4x126/0.4 (16 sqmm) + 2x86/0.4 (10 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991)

4 bar, 415 V, 415 A, 4 x 65x13mm 85 mm long Aluminiumr bbc with sheet metal box 500x150 mm

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

supply & delivery of the following items ( FAN & FITTINGS):-

250V LED batten fittings [Make - Phillips cat no; BN 100 C LED 40S-6500 PSU L120GR / havells /Wipro/Crompton as per choice of EIC.

LED bulk head light fitting (Philips cat no.-WT202W LED6S NW PSU S2 PC/ CG cat no.- LBHE-10-CDL) /havells/Wipro/Crompton as per choice of EIC

AC celing fan 250 v 1200 mm sweep ( Orient Quasser/ Crompton STAR 220/ Usha striker)

AC exhaust fan of 250 V 300 mm (1420 RPM) heavy duty make-EPC

AC exhaust fan of 250 v 230 mm (Make-EPC) heavy duty

250 V, 400 mm (16") cabin fan orient make, RPM-1290 minium (Make- EPC/Cinni/Orient) full metal body

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: (30CM )

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: (23CM )

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire

Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type 125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For Al.

(a) 23 cm Exhaust fan (9")

(b) 30 cm Exhaust fan (12")

PART -C Report for NTS Building

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish (Avg run 11mtr)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

supply of the following items

a. 20W LED tube [Make - Phillips cat no.- BN 021C LED 22S PSU CW GR/ as per choice of EIC.(Make-Philips/Wipro/Crompton)

b. 250V, 40Watt LED batten fittings [Make - Phillips cat no; BN 100 C LED 40S-6500 PSU L120GR / as per choice of EIC.(Make-Philips/Wipro/Crompton)

Supply AC ceiling fan of following Item:

a. 1200 mm(Usha striker plus/ orient quasar/Crompto HS Plus

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

S&D exhaust fan with louver shutter/cowl after making hole in wall & making good damages & smooth cement finish etc. As practicable as possible & providing necy. Length of PVC insulated wire & making connection for exhaust of following

a. 250V 9''dia, 1370 RPM (Make: EPC/ Crompton/Bajaj, Heavy duty, full metal body)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: (23CM )

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For Al

a. 9''dia exhaust fan

Supplying & delivery LED bulk head light fitting (Philips cat no.-WT202W LED6S NW PSU S2 PC/ CG cat no.- LBHE-10-CDL)

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.

Supplying & Fixing 240 V AC/DC superior type Ding- dong Call Bell (Anchor) on HW board incl. S&F HW board

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Supplying and fixing of 6way, double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good thedamages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, Enclosure 607716 incl. Incomer: FP MCB isolator 63A, & Outgoing: 18 no SPMCB (C-Curve 10 ka) (MAKE Legrand/L&T/ABB/Schneider)

S & installation of single phase Timer DB comprising of 2+12 way SPNMCBDB Enclosure 607712 ( Conceled in wall) , 32 A DP MCB , analog time switch ,32 A DP power contactor , with suitable interconnection . ( Make: Legrand) [For AC Machine]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaidpolythene pipe and by the prelaid GI fish wire and making necy. connection as required

a. 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

b. 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles 19 mm dia 3 mm thick polythene pipe without earth continuity wire.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) through cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F 2 no 25 mm dia 3mm thick heavy gauge polythene pipe without continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

a. 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC

Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles 25mm dia 3mm thick polythene without earth continuity wire

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

a. 2.5sqmm

b. 4sqmm

d. 10sqmm

e. 16sqmm

Supplying and fixing 415V, SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse [Make: L&T/ABB/Schneider]

Supplying and fixing 415V, 200ATPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc [Make: L&T]

S& f of 240V 120W LED rooftop Light(Make: Phillips cat.no.:BRP409 LED130 CW SLC FG PSU GR V2)

Supply & fixing LED Sign Board made of 3 mm thick ACP (exterior) sheet (make-Alludecor/Apex) finished with approved metallic colour as back ground (approved by department) to be fixed on MS structure. The all side fabricated with 25 mm Al angle as border and 20/25 mm square bar with required fixing arrangement as frame.---20'X4' 01 no at buildings (as per direction of EIC)

Supply & fixing LED Sign Board made of 3 mm thick ACP (exterior) sheet (make-Alludecor/Apex) finished with approved metallic colour as back ground (approved by department) to be fixed on MS structure 6" coverage at all side for LED board---- 02 no (as per direction of EIC)

S&I M.S. C Channel structure with 4 nos 50x50x6 M.S.angle of suitable length along the sign board frame and making jigjag shape with 25x5 MS flat in between the MS angle frame by welding, also making 4 nos hinges on four corners of MS angle frame by welding 50x50x6 MS angle of suitable length including the same will be duly welded in wall/column with suitable materials by flushing the wall/column of building and mending good damages & fixing the board with the above M.S. angle frame by Supply & fixing nut, bolts, washers etc. as per direction of E.I.C. (Frame size 20'X4') (incl painting charges).

Supply & Fixing special type of imported solid Acrylic letter (thickness 3mm, raised 1.5 inch above ACP)fixed on 3 mm thick acrylic sheet.All side each letter glows or emits light, fixed on ACP sheet by brass/SS nuts & screws after drilling & machining. content will be given by EIC. (Content will be given by authority)

Supply & Fixing of LED inside the letters on metallic board. The Specification of LED light is given below : a) LED modules are to be fixed on Sign Board (behind letters). b) Life: 50000 burning hrs. c) Intensity : same & smooth, throughout, no bright or light or dark patches d) Visibility: 150 metres for normal eye. e) Power supply: 12 Volt DC f) Ambient of Air: 0-50C, 100% relative humidity. Including adequate nos. of LED drivers Make:- Samsung Korea with all necessary connection. (OEM test certificate in original is to be submitted to EIC before execution of work)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

a.2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Supply and Delivery of 2 core 10sqmm XLPE Al/Armoured cable [make-Polycab/Havells/KEI]

Laying of cable upto 2 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

2core 10 sqmm XLPE/A, Al cable

Supplying and fixing following compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables

2 core x 10 Sq mm. XLPE /PVC, Al armoured cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

2 core x 10 Sq. mm. XLPE /PVC, Al armoured cable

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

S& delivery of 4core 95 sqmm Al/A XLPE 1.1kv grade cable(make: Polycab/havells/KEI) [For DG Set]

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Laying of cable 4 core 95 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Laying of cable of 95 sq. mm., after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish

Supplying & fixing 65mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

3.5/4core 95sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

3.5/4core 95sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(2 no for body earthing and 2 for neutral earthing). ISI -Medium

Excavation of soil for installation of Earth Electrode and filling & ramming.For Morrum Soil

Supply and installation of CPRI approved Floor Mounted L.T. cubical type fully compartmentalized distribution panel board, having rigid and self supporting structure fabricated with 14 SWG CRCA sheet with M.S. angle iron frame (main frame with 50 x 50 x 6 mm angle and each compartment with 40 x 40x6 mm angle iron). The base of panel should be made with 75mmx 40mm x 4.4 mm M.S. channel. Each compartment will be providing with hylam board at back side.[Main LT Panel board].

Construction Details :

All incoming & outgoing switches are to be housed in respective compartments hinged and gasket doors at the front. All doors should have panel locking arrangement in such a fashion that it can not be on unless the feeder remains in off position. The rear panel should gasketed wire net guard for ventilation arrangement will be made of easy accessibility to each compartment by providing rear panel doors with locking system . The panel is to be properly gasketed to prevent the dust & vermin. All vertical bus bar chambers is to properly arrange and all electrical equipments are to be fixed by nuts and bolts on suitable Hylam board / porcelain insulators of adequate size and dimension. The outgoing feeder connection from respective switches are to be made at rear side of panel by means of busbar, copper multi core cables, to be terminated on bolted type terminals for cable connection or on bush insulators for bus bar connection.

Incoming Arrangement :

c) 415V 250A TPN Switch Disconnector Fuse unit with HRC Fuse(Make – L&T/Siemens) ----- 1 Nos.

Bus bar section :

415V, 415 Amp capacity 99.9% – 99.5% electrolytic tinned 4 bar copper bus bar each 1 mtr length [size of flat 4x50 mm x 5 mm] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification------------1 set.

The busbar is to be rigidly supported on suitable non-hygroscopic insulating materials of robust ration to with stand electromechanical stress in the event of earth fault. All connection to bus to made by suitable nuts & bolts. The busbar is too wrapped with coloured PVC (Red. Yellow, Blue & Black) for colour identifications. Bus bar should be distributed in such a way that total loads can be evenly distributed on both sides of LT incomer panels as per direction of EIC.

Outgoing Arrangement :

a) 415V 125A TPN Switch Disconnector Fuse unit with HRC Fuse(Make – L&T/Siemens) ----- 1 Nos.

b) 415V , 32A TPN Switch Disconnector Fuse unit with HRC Fuse(Make – SIEMENS, /L&T) ----- 3Nos.

c) 415V 63A TPN Switch Disconnector Fuse unit with HRC Fuse(Make – L&T/Siemens) ----- 4 Nos.

d) E.I. Danger Board of suitable size ------- 1 no.

Metering Panel

a) Multifunction meter with accuracy class 1.0s (Make -L&T, Cat. No.-WL441010OOOO)- 1 no.

b)230V R.Y.B. LED indicator lamp -(SIEMENS/L&T) ---- 6 nos.

c)500/5 Amp ratio C.T (Kappa) --- 3nos.

d) Supplying & Fixing 6 Amp SP MCB----3 nos.

Interconnection :-

All interconnection between incoming main to Busbar are to be made with suitable size electrolytic tinned copper bars or equivalent flexible pve insulated multistranded single core Cu cable and the same between busbar to each outgoing mains and & for metering arrangements are to be made by suitable size of Copper & with maintaining Proper color code with proper socketing of the end of each wire leads. Also the main Bus bar to be extended to outgoing feeders on two side of bus coupler panel (as per direction of EIC).

Earthing :-

A separate continuous GI earth busbar of appropriate size is to be painted at the inside bottom of the panel and run across the full load of the panel board. All electrical equipment are to be properly earthed with suitable size G.I. wire.

The complete panel board is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating.

Installation :-

The complete panel board is to be installed on suitable brick padestal as directed by the E.I.C.

Supplying and fixing 415V, 125A, TPN SFU, on Angle Iron Frame with sheet steel enclosure on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [Make: L&T/Siemens] (for DG Source)

Dismantling the old, damaged fan/light/wiring of NTS building (dismantled items to be deposited at concerned section office)

Part D Report for NTS Hostel & CHO Hostel

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.(Avg run 12 mtr)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

supply of the following items

a. 20W LED tube [Make - Philips cat no.- BN 021C LED 22S PSU CW GR)

b. 40W LED tube [Make - Phillips cat no.- BN100C LED40S-6500 PSU)

Supply of following Item:

a. 1200 mm(Usha striker plus/ orient quasar/Crompton HS Plus

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

S&F exhaust fan with louver shutter/cowl after making hole in wall & making good damages & smooth cement finish etc. As practicable as possible & providing necy. Length of PVC insulated wire & making connection for exhaust of following

a. 250V 9''dia, 1370 RPM (make EPC / orient make heavy duty)

B. 250V 12''dia, 1420 RPM (make EPC / orient make heavy duty)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: (30CM )

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: (23CM )

Supplying & Delivery LED bulk head light fitting (Philips cat no.-WT202W LED6S NW PSU S2 PC/ CG cat no.- LBHE-10-CDL / havells)

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(2 no for body earthing and 2 for neutral earthing). ISI -Medium

Excavation of soil for installation of Earth Electrode and filling & ramming.For Morrum Soil

S& delivery of Al/A XLPE cable (make: Havells/Polycab/Gloster/KEI)

b. 4 core 35 sqmm Al/A XLPE 1.1kV grade cable

c. 4 core 70 sqmm Al/A XLPE 1.1kV grade cable

Supplying and fixing of following compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables

a. 4core 35 sqmm

b.4core 70 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

a. 4core 35 sqmm

b.4core 70 sqmm

Laying of two cables of in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed

a. 4core 35 sqmm

b.4core 70 sqmm

Supplying & fixing 65mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

Excavation of morrum soil for installation of Earth Electrode and filling & ramming

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating

Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc

Dismantling the old, damaged fan/light/wiring of NTS Hostel and CHO Hostel (dismantled items to be deposited at concerned section office)

Making RCC & Brick Foundation (10inch brick work) Below 0.5 mt from GL & 500 mm above GL. Of size. 3mt x2mt incl. 1.5mm thick neat cement finish on all four sides & top. [DG foundation]

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run

KANJILAL and SONS

MODERN ELECTRIC

SAKTI PADA GHOSH

M/S JOGMAYA ENTERPRISE