CERTAIN REPAIRS TO DG SETS OF CAPACITY 25 KVA TO 320 KVA INSTALLED AT AF STN LEH DETT KARGIL AND DETT NYOMA UNDER GE AF LEH

Amount

Major repair/ overhauling of the DG Sets of capacity 320 KVA Make: Kirloskar ( KOEL) complete after dismantling of engine assembly, if required and repair/ repalcement of the engine spares complete including testing at full load after overhaul as per the direction of Engineer-in- Charge. Major repair includes the replacement/ repair of the following engine spares/ parts complete all as directed by Engineer-in-Charge :- Note :- The cost of the spares will be measured and paid separately.

Lub Oil Filter

Fuel Filter

Air Filter ( inner & Outer)

Set of Hose Pipe

Set of Hose Clips

Set of Gasket

Piston Ring Set

Cylinder Liner

Turbo Charger

Connecting Rod

Piston Cooling Nozzle

Main Bearing Set Std

C.R. Bearing Set Std

Alternator Belt

Exhaust Valve

Inlet Valve

Valve Seat Inlet

Valve Seat Exhaust

Valve Guide

Set of Fuel Flexible Pipe

Set of O-Ring

Connecting Rod Bush

Set of Sealing Ring

Grinding and Alignment of Crank Shaft

Alignment of Cam Shaft

Alignmernt of Balance Shaft

Reparing of Cylinder Head After Fittment of Valve, Valve Seat , Valve Guide and Presrrure Testing of Cylinder Head

Aligmnent Connecting Road

Reparing , Overhauling and Calibration of Fuel Pump

Repairing, Overhauling and Calibrationof Injectors

Cleaning and Descaling of Radiator

Major repair/ overhauling of the DG Sets of capacity 200 KVA Make: Greaves complete after dismantling of engine assembly, if required and repair/ repalcement of the engine spares complete including testing at full load after overhaul as per the direction of Engineer-in- Charge. Major repair includes the replacement/ repair of the following engine spares/ parts complete all as directed by Engineer-in-Charge :- Note :- The cost of the spares will be measured and paid separately.

Filter Element With O Ring

Filter Insrt With O Ring

Set of Hose Clips

Set of Sealing Rings

Set of W/Hoses

Set of O Rings

Set of Gasket

Set of Flexible F/Pipes

Push Rod

Conn Rod Big End Bolt

O-Ring Viton 125x4

Valve Steam Seal

Lub Oil Filter

Piston Rings Set

Cylinder Liner

Piston Assy

Brass Sleeve Cyl Head

Brass Sleeve

Cu.Sleeve

Valve Guide

Inserts V S Inl/Exh

Conn Rod Brg Top+Bottom

Bush-Connrod -S/End

Valve Inl/Exh

Half Collet

Piston Cooling Nozzle Std

Injector Nozzle with proper calibration at authorized workshop

Cylinder Head Sealing

Water Pump Assy

V-Belt Set

Lub Oil Pump

Turbo Charger

Grinding And Alignment of Crank

Cam Shaft Alignment

Alignment of Balance Shaft

Machining of Cylinder Head ( Valve, Valve Seat, Valve Guide, Fittting And Cylinder Head Pressure Testing)

Connecting Rod Bush Fitting And Aligmnment

Calibration/Overhauling of Fuel Pump

Cleaning And Descaling of Radiator

Top Overhauling of the DG Sets of capacity 160 KVA Make: Greaves/ Cummins complete after dismantling of engine assembly, if required and repair/ repalcement of the engine spares complete including testing at full load after repair/overhaul as per the direction of Engineer-in- Charge.Repair job includes the repair/replacement of the following engine spares/ parts complete all as directed by Engineer-in-Charge :- Note :- The cost of the spares will be measured and paid separately.

Fuel Filter

Fuel Water Seperator

Set Of Hose Clips

Set-Sealing Rings

Set Of W/Hoses

Set Of O Rings

Set Of Gasket

Set-Flex F/Pipes

Push Rod -

Valve Steam Seal

Lub Oil Filter

Piston Rings Set

Cylinder Liner

Piston Assy

Brass Sleeve Cyl Head

Brass Sleeve

Cu.Sleeve

Valve Guide

Inserts V S Inl/Exh

Conn Rod Brg Top+Bottom

Bush-Connrod -S/End

Valve Inl/Exh

Half Collet

Piston Cooling Nozzle Std

Injector Nozzle with proper calibration at authorized workshop

Cylinder Head Sealing

Water Pump Assy

V-Belt Set

Machining Charges For Cylinder Head ( Valve, Valve Seat, Valve Guide, Fittting And Cylinder Head Pressure Testing)

Con Rod Bush Fitting And Aligmnment Charges

Fuel Pump Calibration/Overhauling Charges

Injector Calbiration/Overhauling Charges

Cleaning And Descaling of Radiator

Top Overhauling of the DG Sets of capacity 250 KVA Make: Greaves complete after dismantling of engine assembly, if required and repair/ repalcement of the engine spares complete including testing at full load after repair/overhaul as per the direction of Engineer-in- Charge.Repair job includes the repair/replacement of the following engine spares/ parts complete all as directed by Engineer-in-Charge :- Note :- The cost of the spares will be measured and paid separately.

Filt. Element With O Ring

Fltr Insrt With O Ring

Set Of Hose Clips

Set-Sealing Rings

Set Of W/Hoses

Set Of O Rings

Set Of Gasket

Set-Flex F/Pipes

Push Rod -

O-Ring Viton 125x4

Valve Steam Seal

Lub Oil Filter

Piston Rings Set

Cylinder Liner

Piston Assy

Brass Sleeve Cyl Head

Brass Sleeve

Cu.Sleeve

Valve Guide

Inserts V S Inl/Exh

Conn Rod Brg Top+Bottom

Bush-Connrod -S/End

Valve Inl/Exh

Half Collet

Piston Cooling Nozzle Std

Cylinder Head Sealing

Water Pump Assy

V-Belt Set

Machining of Cylinder Head ( Valve, Valve Seat, Valve Guide, Fittting And Cylinder Head Pressure Testing)

Con Rod Bush Fitting And Aligmnment

Calibration/Overhauling of Fuel Pump

Calbiration/Overhauling of Injector

Cleaning And Descaling of Radiator

Top Overhauling of the DG Sets of capacity 125 KVA Make: Greaves complete after dismantling of engine assembly, if required and repair/ repalcement of the engine spares complete including testing at full load after repair/overhaul as per the direction of Engineer-in- Charge.Repair job includes the repair/replacement of the following engine spares/ parts complete all as directed by Engineer-in-Charge :- Note :- The cost of the spares will be measured and paid separately.

Filt. Element With O Ring

Fltr Insrt With O Ring

Set Of Hose Clips

Set-Sealing Rings

Set Of W/Hoses

Set Of O Rings

Set Of Gasket

Set-Flex F/Pipes

Push Rod -

O-Ring Viton 125x4

Valve Steam Seal

Lub Oil Filter

Piston Rings Set

Cylinder Liner

Piston Assy

Brass Sleeve Cyl Head

Brass Sleeve

Cu.Sleeve

Valve Guide

Inserts V S Inl/Exh

Conn Rod Brg Top+Bottom

Bush-Connrod -S/End

Valve Inl/Exh

Half Collet

Piston Cooling Nozzle Std

Injector Nozzle with proper calibration at authorized workshop

Cylinder Head Sealing

Water Pump Assy

V-Belt Set

Machining of Cylinder Head ( Valve, Valve Seat, Valve Guide, Fittting And Cylinder Head Pressure Testing)

Con Rod Bush Fitting And Aligmnment

Calibration/Overhauling of Fuel Pump

Cleaning And Descaling of Radiator

Major repair/ overhauling of the DG Sets of capacity 25/30 KVA Make: Kirloskar ( KOEL) Model No-KGI-30WSI installed at AF Dett Nyoma complete after dismantling of engine assembly, if required and repair/ repalcement of the engine spares complete including testing at full load after overhaul as per the direction of Engineer-in- Charge. Major repair includes the replacement/ repair of the following engine spares/ parts complete all as directed by Engineer-in-Charge :- Note :- The cost of the spares will be measured and paid separately.

Filt. Element With O Ring

Fltr Insrt With O Ring

Set Of Hose Clips

Set-Sealing Rings

Set Of W/Hoses

Set Of O Rings

Set Of Gasket

Set-Flex F/Pipes

Push Rod -

Conn Rod Big End Bolt

O-Ring Viton 125x4

Valve Steam Seal

Lub Oil Filter

Piston Rings Set

Cylinder Liner

Piston Assy

Brass Sleeve Cyl Head

Brass Sleeve

Cu.Sleeve

Valve Guide

Inserts V S Inl/Exh

Conn Rod Brg Top+Bottom

Main Bearing

Bush-Connrod -S/End

Valve Inl/Exh

Half Collet

Piston Cooling Nozzle Std

Injector Nozzle

Cylinder Head Sealing

V-Belt Set

Crank Grinding And Alignment Charges

Cam Shaft Alignment Charges

Balance Shaft Alignment Charges

Machining Charges For Cylinder Head ( Valve, Valve Seat, Valve Guide, Fittting And Cylinder Head Pressure Tsting)

Con Rod Bush Fitting And Aligmnment Charges

Fuel Pump Calibration/Overhauling Charges

Repair/Replacement Of Old Unsv 12v Self Starter Assembly Incl Replacement Of Flywheel Annular Gear

Cleaning And Descaling Charges Of Radiator

Top Overhauling of the DG Sets of capacity 125 KVA Make: Cummins complete after dismantling of engine assembly, if required and repair/ repalcement of the engine spares complete including testing at full load after repair/overhaul as per the direction of Engineer-in- Charge.Repair job includes the repair/replacement of the following engine spares/ parts complete all as directed by Engineer-in-Charge :- Note :- The cost of the spares will be measured and paid separately.

Fuel Filter

Fuel Water Seperator

Set Of Hose Clips

Set-Sealing Rings

Set Of W/Hoses

Set Of O Rings

Set Of Gasket

Set-Flex F/Pipes

Push Rod -

Valve Steam Seal

Lub Oil Filter

Piston Rings Set

Cylinder Liner

Piston Assy

Brass Sleeve Cyl Head

Brass Sleeve

Cu.Sleeve

Valve Guide

Inserts V S Inl/Exh

Conn Rod Brg Top+Bottom

Bush-Connrod -S/End

Valve Inl/Exh

Half Collet

Piston Cooling Nozzle Std

Cylinder Head Sealing

Water Pump Assy

V-Belt Set

Machining of Cylinder Head ( Valve, Valve Seat, Valve Guide, Fittting And Cylinder Head Pressure Testing)

Con Rod Bush Fitting And Aligmnment

Calibration/Overhauling of Fuel Pump

Calibration/Overhauling of Injector

Cleaning And Descaling of Radiator

Note for Item No 1 to 7 :- Any minor spares such as nuts, bolts, washers, springs, gaskets etc which are essential for the repair job but not taken in the contract are deemed to be included in the quoted rates & no extra payment will be made to the contracor for such minor spares.

Repair/Replacement of UNSV parts of Digital PCB card and control wiring for DG of Cap 125 KVA to 320 KVA including caliberation as per site requirement of same model or Equivalent for Smooth Operation of DG , complete all as specified and directed by Engineer-in-Charge.

Repair/ replacement of AVR complete of DG set of capacity 125 KVA to 320 KVA DG set fixed as in replacement of old unservicable AVR in and including taking out the unserviceable one, complete all as specified and directed by Engineer-in-Charge.

Repair/ Rewinding of charging alternator (Dynamo) assy 12/24 Volt of DG Set 125 KVA to 320 KVA including rewinding, replacement of carbon bush set, bushes, bearings, varnishing and descaling as required to make it serviceable etc , complete all as specified and directed by Engineer-in-Charge.

Repair/Replacement to self starter of cap 12/24Volts of DG Set 125 to 320 KVA with complete rewinding, replacement of pinion and teeth including all minor parts like washers as required to make it serviceable complete all as specified & directed by the Engineer-in- Charge.

Taking out Fuel Injector Pump assembly from DG set of capacity upto 125 KVA (Cummins/Greaves) and carried out caliberation from authorised work shop including replacement of minor parts such as washer,, gasket nuts and bolts as required at site and refixing the same including testing to entire satisfection , complete all as specified and directed by Engineer-in-Charge.

Repair and calibration of injectors assembly (06 Each Nozzles) complete by replacing of worn out parts carrel plungers, injectors etc suitable for DG Set of capacity upto 125 KVA complete all as specified and directed by Engineer-in-Charge.

Maintenance free battery 12 volt 150 AH complete as in replacement of old unservicable battery in and including taking out the unserviceable one, complete all as specified and directed by Engineer-in-Charge. Make- Exide or equivalent make as specified in Appendix of Makes.

Supply and filling of lubrication oil SAE-40 ( 15 W-40 grade) of or as approved by GE. (Should be packd of 15/20 Ltrs bucket) , complete all as specified and directed by Engineer-in-Charge. Make: Greaves/Valvoline or equivalent make as specified in Appendix of Makes.

Supply and filling of coolant DAFC-50 of authentic make ,complete all as specified and as directed by the Engineer -in- Charge .

Note : Schedule of credit to be deducted on acceptances of bid.Details of Schedule of credit is given in tender documents

M/S LIBE & CO (BID ID -3092662)