REPAIRS AND MAINT OF INTERNAL AND EXTERNAL ELECTRICAL WIRING OF SERVANT QTRS OF OFFRS MD ACCN AT NDA KHADAKWASLA

Amount

Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces complete all as directed

M&L for point wiring on PVC casing and capping confirming IS:3419-1988 with the help of multistranded unsheathed FRLS copper cable 1.5 sqmm 650/1100V grade confirming to IS:694 -1990 adhereing to colour code including earth wire of the size 1.5 Sqmm multi-stranded green colored unsheathed FRLS copper cable connecting properly to the socket/ earth terminals with suitable terminal PVC boxes as required at site for One light /fan point controlled by one switch one way

Ditto as per item No 2 above but One 3 pin socket outlet , 5 amps on independent board

Ditto as per item No 2 above but One 3 pin socket outlet , 5 amps on same board

M&L for point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box suitable for 15 Amps socket and switch outlet power point independent circuit

M&L for switch piano Conform IS 4615-1968 flush type 5 Amps single pole one way. Make: Anchor/Vinay.

S&F in replacement of socket outlet 3 pin 5A flush type complete all as specified. (Make:Anchor/Vinay)

S & F in replacement of switch socket combination 5/6 Amps flush mounted 5 pin multi purpose complete all as specified.(Make:Anchor/Vinay)

S & F in replacement of switch socket combination 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified.(Make:Anchor/Vinay)

S & F in replacement of switch socket combination with box 5/6 Amps flush mounted 5 pin multi purpose complete all as specified.

S & F in replacement of switch socket combination with box 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified.

M&L in replacement electronic step type ceiling fan regulator Conform IS 4615-1968, flush type.

S&F ceiling rose surface bakelite shall comply with IS :371-1979 60x 25 mm two to three terminals plates and of outside diameter not less than 63.5mm.

S&F PVC / polycarbonate lamp holders batten/Angle type with suitable junction box complete all as specified and directed.

M&L for securing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type ISI marked inclusive all accessories complete all as specified and directed.

S& F PVC unbreakable surface boxes of size 6x6. Make - Press Fit/Anchor

S& F PVC unbreakable surface boxes of size 4x7. Make - Press Fit/Anchor

S& F PVC unbreakable surface boxes of size 6x8. Make - Press Fit/Anchor

S& F PVC unbreakable surface boxes of size 8x10. Make - Press Fit/Anchor

S&F LED tube light with diffused optics ultra bright LED tube light 18/20watt with high efficiency, integrated aluminum heat sink suited for installation in existing T8 tube light with G13 lamp holders complete all as specified.

S&F in replacement 1x18/20W,230V surface and wall mounted batten suitable for installing LED Tube including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified .

S&F LED building security light fiitting 20 W,IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens complete fixing with bracket of adequate length, incl electrical connection from connector to light fitting. and fixed to pole/wall with necessary MS clamp accessories complete all as specified and directed. Make:Havells/Philips/Luker

S&F MCB DB 04 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site.

S&F in replement MCB SP 6 to 32 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper/aluminium cable lugs with suitable size for incoming and outgoing.

S&F in replecment MCB DP 6 to 32 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing.

M&L for earthing complete with GI earth plate electrode 600 x 600 x 6mm thick burried directly in ground (earth pit plate kess than 2.5 mtrs below ground level) with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC (1:2:4) type B-1 pit, cover frame, GI pipe 15mm dia light grade with funnel and locking arrangement all as shown in electric plate No. 03 complete all as specified.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with solid aluminium conductor of size 6 sq mm 4 core

Excavation in trenches in hard/dense soil n exc 1.5m wide and n.exc 1.5m in depth and getting out complete all as specified and directed

Excavation in trenches in soft/dis integrated rock n exc 1.5m wide and n.exc 1.5m in depth and getting out complete all as specified and directed

Returning filling in including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and directed

Removing excavated surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5 mtr above starting point all as specified and directed

M&L for laying of half round reinforced concrete pipe, of dia 150 mm, half round for bottom and half round for top and before laying excaved area shall be leveled. complete all specified and directed. Note : 01 Half round top and 01 half round bottom together will be considered as one running meter. Make as per sample given by Engineer-In-Charge

M&L for cutting of existing road/ hard standing by providing suitable T&P to make suitable size bore for fixing 50 mm dia pipe in road crossing etc. including the cost of making good the disturbed surface and matching with existing (Chequered tiles/Road/PCC) complete all as specified and directed

S&F GI tubing medium grade 40 mm dia ISI marked with all fittings laid in trenches and fixed pole by flat iron clamps, nut,bolt,washers suitable size complete all as specified and directed at size.

Taking down existing service connection of any type including GI wire with insulators complete all as directed.

Tejas Enterprises

KESARI AND SONS

M/S CHANDAN BUILDERS

Sparkh Electricals & Works

ASHWAMEDH ENGINEERS

M/S PREETAM KUMAR SHIVAJI SHINDE