Rehabilitation of Refinery channel from RD 0 to 20475 Tail

Amount

Dismentling Brick masonery in CM 1:4 in F&P as per HSR Item No. 8.5 (b)

Dismentling CC 1:2:4 for slab as per HSR Item No. 8.6 (e)

Dismenteling CC 1:3:6 as per HSR Item No. 8.6 (c)

Dismantiling dry brick work for diversion as per HSR Item No. 8.5 (I)

Earth work excavation for filling in all kind of soil with all lead, lift & all other allowances. HSR 6.2 (b) (c) (i) (ii) (iii) & 6.3 (i)

Earth work excavation for cutting with an avg. lead up to 15 mtr (As per X-section attached) as per HSR Item No. 6.2 (b_

Rehandiling of earth work with an avg. lead upto 15 Mtr. as per HSR Item No. 6.2 (b) & (c)

Earth work for compaction. HSR 6.2 (g)(i), (ii) & (v)

Laying design mix of Grade M-15 Cement Conc lining of 75 mm thick in bed with sensored pavor machine including cost of all material, labour, machinery lifts and delitfs for all material including water and compacting in bed and application of 10 mm thick 1:5 cement sand plastered on the prepared wet sub grade in bed, collecting debries and disposed off collected material outside the channel as per approved drawing and specification & relevant IS Code (latest revision) and as directed by Engineer-in-Charge including cost of sampling, testing of finished work and all type of water arrangement complete in all respect.

Laying design mix of Grade M-15 Cement Conc lining of 75 mm thick on side slopes for vertical hieght upto 3.50 M on side slope and curved portion with censored pavor machine including and cost of all material, labour, machinery lifts and delitfs for all material including water and compacting side slopes and application of 10 mm thick 1:5 cement sand plastered on the prepared wet sub grade on side slope, collecting debries and disposed off collected material outside the channel as per approved drawing and specification & relevant IS Code (latest revision) and as directed by Engineer-in-Charge including cost of sampling, testing of finished work and all type of water arrangement complete in all respect.

Providing & fixing Premoulded bituminous joint filler, for expansion joints, including the cost of sealing compound and primer coat. 12 mm wide HSR 24.35 (a).

Centering & Shuttering for faces of concrete foundation.HSR item No. 9.13.

Clearing jungle inclduing uprooting of rank vegetation grass brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 metre above ground level and removal of rubbish upto a distance of 50M outside the periphery of the area cleared. HSR 6.26

Earth work excavation i/c all lead, lifts and all other allowances with an avg. lead of 45 mtr. as per HSR Item No. 6.2 (b) (c) (i) & (ii)

Preparing watering and ramming surface for laying C.C. in Horizontal as per PWD specification and design and as per direction of engineer incharge HSR 10.122 (b) (i)

Design mix Cement Concrete of grade M-15 with minimum cement contants 240 kg./cum in Foundation & Plinth. HSR Item No.10.64

Providing & laying in position machine batched and machine mixed design mix M-25 Grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, i/c pumping oc concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per dirction of Engineer-in-charge in foundationa nd plinth. (Note cement content considered in this itme is @330kg/cum). HSR 10.66

First class Brick work laid in Cement Sand Mortar 1:3 in foundation & plinth. HSR Item No.11.5

First class Brick work laid in Cement Sand Mortar 1:3 in super structureas per HSR Item No.11.10

Sand filling behind pucca structure as per PWD specification and design and as per direction of engineer incharge. HSR Item No. 14.83

Filling expension joint as per HSR Item No.24.35 (b)

Providing & fixing caution board iron 4x3 N.S. Item

Laying 1st class brick work laid in cement sand mortar 1:6 in foundation and Plinth. HSR Item No.11.2

Centering and shuttering for slab culvert HSR Item No.9.18 (b)

Prepration of plastered or concrete surfaces for painting including sand papering in surfaces appling one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing surface to the required finish, complete on crash barrier. HSR Item No.16.24

Painting two coats with ready mixed exterior paints in all shades on newly plastered or concrete surface of walls. HSR Item No.16.26

Applying primer coat with cement primer in all shades on newly plastered or concete exterior surfaces. HSR Item No.16.25

Providing & fixing drainage spout in slab N.S. Item

Supply and laying of RCC hume pipe 900 mm dia. HSR Item No.29.93

Removing of RCC hume pipe 900 mm dia as per HSR Item No.8.35

Dry brick on edge paving sand grounted over 50 mm thick earth and mud plaster HSR Item No. 14.20

Brick edging 6.83 cm wide 11.43 cm deep to plinth protection with 1st class brick i/c grouting with cement sand mortar 1:4. HSR Item No.11.100

Supply of TMT bars for RCC works I/C bending binding and placing in position (FE500, TMT Steel Bars) of TISCO, SAIL, RINL, IISCO, Jindal Steel & Power Ltd., JSW Steel Ltd. or Electro Steel Ltd. HSR Item No. 18.22

Credit of steel.

Credit of Old brick bats.

M / S DAYANAND CONTRACTOR