Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.0 LAccepted-AOC | 1 | Accepted-AOC Accepted as lowest bidder | |
| 2 | 2₹9.2 L+₹89,418 (10.7%)Rejected-Finance PLOT NO 2 INDUSTRY AREA NEAR LAL WARE HOUSE OPP OLD HOUSING BOARD COLONY SIRSA SIRSA HARYANA 125055 | SIRSA | HARYANA | 125055 | 2 | Rejected-Finance Other than Lowest |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
3 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Highground
AGE(I) Highground Air Force station Highgrounds Chandigarh 160004
MISC REPAIR TO OTM ACCN AT AIR FORCE STATION BARWALA UNDER AGE (I) HIGHGROUND CHANDIGARH
2022_MES_555388_1
AGE(I)/HG CHD/T-07/2022-23
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
As per tender document
8 documents required · 8 mandatory
₹500
AGE (I) Highground
₹20,000
Yes
12 Feb 2024
30 Sept 2022
5 Nov 2022
30 Sept 2022
3 Nov 2022
15 Oct 2022
Amount
Demolition of cement concrete ( unreinforced) in ground floors and pavings n. exe 15 cm thickness (below or above ground level ) including removal of debries out of defence land complete all as specified and directed
M&L cement concrete type B-1 1:2:4 (using 20mm graded stone aggregates) as in plinth protections 55 mm thick, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3 m c/c filled with mastic mortar, Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.
Dismantling floor, hearth or wall tiling, terrazzo toping/ dado, including cement mortar bedding/backing and removing rubbish off the premises of MoD land, including preparation of dismantled surface area to receive backing coat/bedding layer for tiles, complete all as specified and directed.
Material and Labour for coloured glazed ceramic tiles of size 450x350 x 6-7mm/350 x 250 x 6-7mm thick as in vertical surface set and jointed in neat cement slurry @ 3Kg/Sqm, and including pointing in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 10 mm screed bedding in CM (1:4),complete all as specified and directed.
Material and labour for first quality Non Skid joint free ceramic coloured tiles 7 to 8mm thick, (square/rectangular), area of each tile exceeding 0.06 Sqm but not exceeding 0.11Sqm, as in floors etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 15mm thick screed bed/bedding layer in CM (1:6), complete all as specified and directed.
Material and labour for first quality Non Skid joint free ceramic coloured tiles 8 to 10mm thick, (square/rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 15mm thick screed bed/bedding layer in CM (1:4), complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed..
Material and labour for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) as on cooking platforms, window cills, steps and like, set in neat grey cement slurry @3Kg/Sqm, laid over and including 15mm thick bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.
Material and labour for Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (granite finish) and Screed bed or bedding layer of 15 mm thick in CM 1:4 for laying floor finish complete all as specified and directed.
Material and labour rounding to edges of stone slabs18 to 20mm thick as in in steps, jambs, pillars, cooking platforms and likes complete all as specified and directed
Dismantling brick tiles or terracing tiles, single layer on roof including segregating and stacking serviceable brick tiles and removal of unserviceable brick tiles / brick bats and rubbish outside defence land, complete all as specified and directed.
Demolition of mud phuska on roofs, any thickness, including plaster and leeping plaster and bottom layer of polythene film if any, including removal of retrieved material outside defence land, complete all as specified directed.
Material and Labour for cutting out cracks to 'V'-section in existing RCC roofs or terracing, cleaning out , wetting, grouting with cement slurry 1:3, complete all as specified and directed.
Material and Labour plain cement concrete (1:2:4), type B-0 (using 12.5mm graded crushed stone aggregates) as in roof kerb, roof pading and like, including water proofing compound as per manufacturers instruction @3% of cement weight, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.
Material and labour for cutting groove in brick wall, 75 mm wide and 65 mm deep, for inserting APP membrane and shaping horizontal face of groove with cement mortar (1:3), and removal of rubbish outside defence land complete all as specified and directed.
Material and labourfor water proofing treatment of RCC roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30litre/Sqm including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60Kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps (100mm side lap and 150 mm end lap ) & joints with flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.
Material and Labour, 40mm thick brick tiles laid on and including 15mm thick cement screed bed in CM (1:6) using grey cement and grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement laid on concrete roof, complete all specified and directed.
All as per serial item No 17 here-in-before (but except brick tiles), complete all as specified and directed. Note : (i) Old serviceable tiles as obtained from Serial item No 11 here-in-before shall be reused. (ii) The cost of cleaning and washing of brick tiles for re-use, shall be deemed to be included in the unit rate quoted by the tenderer.
Material and labour for rendering 10 mm thick in cement mortar (1:3), using water proofing compound as per manufacturer's instructions, over & including 40mm average thickness cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in padding to giving slope to chajja/roof etc, finished even and smooth using extra cement , complete all as specified and directed. Note :- Supply only water proofing compound will be measured and paid for separately.
Supply only integral water proofing compound, complete all as specified and directed.
Material and Labour plain cement concrete (1:4:8), type D-2 (using 40 mm graded crushed stone aggregates) as in filling in box type chhajja etc, complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories.
Supply and fixing in 110 mm dia bore PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, fixed to wall, complete all as specified and directed.
Supply and fixing in 110mm bore PVC (SWR) bends any radius, fixed to pipes with adhesive, complete all as specified and directed.
Disconnecting existing water tanks of capacity exc 250 Litre but n.exc 500 litre and removal from site to store for reuse or credit, complete all as specified and directed.
Disconnecting existing tanks exceeding 250 Litres & not exceeding 500 Litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Cleaning repairing, etc shall be measured and paid separately) complete all as specified and directed.
Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500 litres capacity ‘triple layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed.
Supply and fixing in repair Gun-metal globe or gate valves, with iron wheel head, screwed down, high pressure,heavy duty, ISI marked , screwed both ends for iron pipe or for unions of 20mm bore dia complete all as specified and directed.
Taking up or down existing steel water tubing and connections, 15mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.
Taking up or down existing steel water tubing and connections, 20 mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.
Fixing only, old steel water tubing, 15mm bore pipe, with all fitings in new or old position (walls, ceiling, floors etc), complete all as specified and directed. Note : Old steel tubing shall be fixed after proper checking, cleaning washing, bleaching etc.
Fixing only, old steel water tubing, 20 mm bore pipe, with all fitings in new or old position (walls, ceiling, floors etc), complete all as specified and directed. Note : Old steel tubing shall be fixed after proper checking, cleaning washing, bleaching etc.
Material and Labour for Cutting chases in brick work, pinning in making good to facings where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills etc and cutting chases for concealed water tubing and making good, cutting not exceeding 10 cm in girth complete all as specified and directed.
Supply and fixing galvanized steel water tubes 15mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.
Supply and fixing galvanized steel water tubes, 20 mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.
Supply and fix in repair 100mm dia CI ‘P’ or ‘S’ trap complete all as specified and directed.
Supply and Fix in repair cast iron 100mm bore sand cast soil waste or vent pipe as in any length with or without ears with cement joints fixed to walls complete all as specified and directed.
Supply and Fix in repair cast iron 75mm bore sand cast soil waste or vent pipe as in any length with or without ears with cement joints fixed to walls complete all as specified and directed.
Supply and fixing in repairs stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays for 100 mm bore pipe, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed.
Supply and fixing 75 mm size cast iron floor trap with 125 mm CP grating including jointing to waste pipe embedded in cement concrete (1:2:4) type B-1 complete all as specified and directed.
Supply and fixing salt glazed stoneware gully trap, size 150x100mm, square or round mouthed, type 'P', including set in PCC (1:2:4) bed block and jointed to drains with cement mortar (1:1), fixed as in repairs, complete all as specified and directed.
Supply and fixing in repairs PVC connection 15mm size of length 450 mm with PTMT nuts , fixed as in repairs, complete all as specified and directed.
Supply and Fix in repair vitreous china wash basin of size (550 x 400 x 210 mm), white, flat back, supporting on and including suitable angle iron bracket, also including 32mm dia CP brass coupling, along with PVC waste pipe complete, including connection to pipe etc, with and including 15mm dia 450mm long PVC connection pipe with steel check nut (excluding taps) including & pinning in ends of brackets and taking down and removal of old wash hand basin, complete all as specified and directed.
Supply and Fix in repairs vitreous china wash down water closet (pedestal pattern), of snow white colour and of size 520mmx360mmx390mm and including plastic seat cover of same colour, pressure jet spray etc complete all as specified and directed.
Supply and fixing vitreous china wash down water closet squatt pan, Indian type (Orissa pattern), of size 580mmx440mm, white with integral foot rests (excluding flushing cistern) pipe but including CI ‘P’/’S’ trap), set in & jointed with appripriate adhesive/mortar including embedding in concrete including 32mm bore PVC flush pipe & jointing with adhesive, and taking down old and removal of debris outside MOD land, complete all as specified and directed.
Supply and fixing 10 litre capacity virgin polypropylene (PVC) low level flushing cistern, ISI marked, white or coloured, valve less symphonic action type, with inlet, ball valve, float and handle, complete including PVC bend/ flush pipe, brackets and making all connections, fixed as in repairs and removal of old from site to store for reuse or credit, complete all as specified and directed.
Supply and Fix in repair Vitreous China urinals, half stall type (back or corner wall type) of size 420mmx395mmx635mm of white colour including CP brass coupling, PVC flexible discharge pipe, chromium plated water spreader for fixing with 15 mm dia pipe, connection pipe and discharge down pipe complete against wall in CM 1:2 and pointing around urinal back in cement complete all as specified and directed.
Supply and fixing bib tap , cast copper alloy, fancy type, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, fixed as in repair, including removal of old to store for reuse or for credit, complete all as specified and directed. Make: MARC /ESS ESS / JAINKO/PRAYAG
Supply and fixing in repairs pillar tap long neck, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts, screwed for iron pipe 15mm bore dia and fixed to WHB and connections to iron pipe complete all as specified and directed. Make: MARC /ESS ESS / JAINKO/PRAYAG
Supply and fix in repair Stop valves 15 mm dia, cast copper alloy, screwed down, high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make: MARC /ESS ESS / JAINKO/PRAYAG
Supply and Fixing in repairs Brass chromium plated shower rose 125 mm size with or without swivel joints, fancy type with CP arm concealed type with CP cup including fixing to steel pipe or union 15mm bore complete all as specified and directed.
Supply and fixing grating doom PTMT 100mm dia with waste holes (minimum weight 25 grams) , fixed as in repairs, complete all as specified and directed.
Supply and Fix Waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45 gms complete all as specified and directed.
Supply and fixing in repairs bib tap of PTMT for 15 mm bore pipe, any colour, high pressure, screwed for iron pipe and fixed (Minimum weight 90 grams), complete all as specified and directed.
Supply and fixing in repairs stop valve of PTMT for 15 mm bore pipe, any colour, high pressure, screwed for iron pipe and fixed (Minimum weight 90 grams), complete all as specified and directed.
Supply and fixing in repair angle stop valve of PTMT for 15 mm bore pipe, any colour, high pressure, screwed for iron pipe and fixed (Minimum weight 90 grams), complete all as specified and directed.
Supply and fixing in repairs PTMT ball valves, suitable for 15 mm bore iron pipe, (weight not less than 142 grams), ISI marked, high pressure, with high density plastic ball, with epoxy coated aluminium rod, complete all as specified and directed.
Supply and fixing in repairs PTMT ball valves, suitable for 20 mm bore iron pipe, (weight not less than 210 grams), ISI marked, high pressure, with high density plastic ball , with epoxy coated aluminium rod, complete all as specified and directed.
Supply and fixing in repair, PVC kitchen waste coupling with rubber washer of design and pattern suit to existing waste couplings including 32mm PVC waste pipe heavy duty complete all as specified and directed.
Supply only PVC Waste Pipe of 32 mm bore dia complete all as specified and directed.
Material and labour for preparation of old decorated wall surfaces by brooming down or steel wire brushing and using sand paper scraping down smoke shoot moulds mass and efflorescent salts and trading oil and greasy spots etc i.e leveling/edging the disturbed places/edges using necessary filling of Birla/JK wall care putty to obtain smooth regular/even finish and applying one coat of Ist quality Oil Bound Distemper, complete all as specified and directed.
Material and labour for preparation of old plastered or unplastered surfaces of ceiling by brooming down with steel brushing, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spot etc and applying one coat of white wash on ceiling , complete all as specified and directed.
Material and labour for Preparation of old plastered or unplastered surfaces of ceiling by brooming down with steel brushing,scraping down smoke soot's moulds moss and efflorescent salts trading oil greasy sport etc and applying one coat of cement base paint on ceiling complete all as specified and directed.
Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, staging etc. and removal of rubbish outside MOD land, complete all as specified and directed.
Material and labour for brickwork with using subclass 'B' old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6), complete all as specified and directed.
All as per serial item No 66 here-in-before (but except bricks), complete all as specified and directed. Note : (i) Old serviceable bricks as obtained from Serial item No 65 here-in-before shall be reused. (ii) The cost of cleaning and washing of brick for re-use, shall be deemed to be included in the unit rate quoted by the tenderer.
Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:6), on brick/concrete surfaces of walls, finished even and smooth without using extra cement , complete all as specified and directed.
Material and Labour for 15 mm thick rendering in CM 1:4 on brick masonary wall, finished even and smooth without using extra cement , complete all as specified and directed.
Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of 1st quality oil bound distemper (oil emulsion) over and including a coat of alkali resistant primer, complete all as specified and directed.
Material and labour preparation of newly plasterd surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
Material and Labour for welding in repairs not exceeding 2.5cm in length (thickness of metal to be welded not exceeding 6mm) in gates, grills, doors, windows etc., including cleaning preparing the surface and holding the members in true position complete all as specified and as directed.
Demolition wall and ceiling boards (fibre pulm, insulation etc )or insulation board/slabs/blanket, any thickness including cover fillets complete all as specified and directed.
Supply and fixing 600 mm x 600 mm x 16 mm mineral fibre ceiling tiles, seamless, of type Classic Lite RH-99, fine texture, of 'Armstrong' fixed on exposed grid system, including anodised aluminium snap grid frame work for false ceiling and hangers 6 mm dia GI (upto 1200 mm length) with level adjusting mechanism, fixed to roof slabs by means of ceilling cleats made out of GI flat 40 mm x 3 mm, 60 mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and directed.
Ditto-all as per item No. 76 but refixing of existing snap grid framework with ceiling board of any description.
Supply and fixing in repairs Solid PVC Wall Lining consisting of 5 mm thick any colour/ shape/ pattern PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.
Supply and fixing 5 mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing of wall to make PVC frame, complete all as specified and as shown in drawing in SSR Part I.
Dismantling timber scantlings framed work, in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.
Dismantling (corrugated, semicorrugated etc) asbestos sheets in roof coverings, complete all as specified and directed.
Supply and fixing roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel, box or flat sections) including distance pieces, cleats etc. with rolled mild steel FE-290 Gde E-165, complete all as specified and directed.
Supply and fixing of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame), not exceeding 1.5 Sqm each and removal, including making good the disturbed surface in CM(1:4) and finishing as per existing specifications and removal of debris outside MOD land, complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame), exceeding 1.5 sqm but not exceeding 4 sqm each and removal, including making good the disturbed surface in CM(1:4) and finishing as per existing specifications and removal of debris outside MOD land, complete all as specified and directed.
Taking down shutters of any description not exceeding 1.0 Sqm from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed
Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed
Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and refixing the same opening after easing & adjusting complete all as specified and directed.
Resecuring or easing & adjusting without taking down Shutters of any description exceeding 1 sqm each and not exceeding 2 sqm complete all as specified and directed.
Supply and fixing factory made pressed steel frames for doors with two rebates, of size 125 mm x 60mm, made out of 1.25mm thick sheet, including PCC 1:3:6 type C-0 filling, one shop coat primer and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
Supply and fixing factory made pressed steel frames for doors with two rebates, of size 105 mm x 60mm, made out of 1.25mm thick sheet, including PCC 1:3:6 type C-0 filling, one shop coat primer and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing in SSR Part-II, in opening, complete all as specified and directed.
Material and labour for mild steel as in framed work of doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing similar work conforming to Fe-290 Grade E-165, complete all as specified and directed.
Supply and fixing flush shutters 35mm thick, solid core construction with block board core and plywood face panels commercial type on both sides, complete all as specified & directed.
Supply and fixing second class hard wood 35 mm thick plain, glazed and skelton factory made shutters, open rebated and prepareddivided into squares(04 Nos) with plain chamfered or rounded mitred and rebated sash bars any number, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutter as specified in SSR Part I, Section 8, Clause 8.24(a), kiln seasoned and chemically pressure treated , supplied and fitted to chowkats complete all as specified and and directed. Note:- Glass or Wire cloth in panels will be measured and paid separately.
Supply and fixing factory made pre-laminated PVC door shutter (conforming to IS-4020) 30mm thick consisting of frame made out of M.S. tubes of 19 gauge thickness & size of stiles, top rail, bottom rails & lock rail all as per shown on drawings in SSR 2010 Pt II, M.S. frame shall have a coat of steel primer of approved make & manufacturer, MS frame covered with 5mm thick heat moulded pre-laminated PVC ‘C’ channel of size 30mm thick, 70mm width out of which 50mm shall be flat & 20mm shall be tapered in 45degree on the either side forming stiles and 5mm thick, 95mm wide pre-laminated PVC sheet out of which 75mm shall be flat and 20mm shall be tapered at 45 degree on the inner side to form top rail & bottom rail and 155mm pre-laminated sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom & lock rail shall be provided on either side of panel. 10mm (5mmx2mm) thick, 20mm wide cross PVC sheet shall be provided as gap inserted to top rail and bottom rail; Paneling of 5mm thick plain colour PVC sheet to be fitted with M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading on inner side and joined together with solvent cement adhesive etc complete all as specified and directed.
Supply and fixing in repair 18 to 19 mm thick block boards grade 1 quality, exterior grade, commercial type fixed with screw to timber frame work complete all as specified and directed.
Supply and fixing factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolt to each shutter, steel handle and without glazing bars, including flat iron 12x3mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as shown on Drawing no CEAF/STD-185-2012 sheets 1/2 & 2/2.
Supply and fixing factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolt to each shutter, steel handle and with glazing bars, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing no CEAF/STD-185-2012 sheets 1/3 & 3/3.
Supply and fixing factory made box type steel section ventilator with top/centre hung shutter double shutter for glazing and wire gauze with pintle hinges & 01 No 150mm mild steel tower bolt, hinges, steel peg stay, steel handle to each shutter, steel handle dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-186-2012 Sheets 1/1.
Supply and Fixing Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.
Supply and Fixing, mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate, complete all specified and directed.
Supply and Fixing, in repair mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate, complete all specified and directed.
Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
Supply and fixing in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead including replacement of damaged wooden bedding with and including two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Supply and fixing plain sheet glass 4 mm thick, ordinary quality, not exceeding 0.50 Sqm each pane, and glazing with oil putty and securing pins, complete all as specified and directed.
Supply and fixing figured sheet glass 4mm thick, pin headed type, not exceeding 0.50 Sqm each pane, and glazing with oil putty and securing pins, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, shape, quality or any description) from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones, complete all as specified.
Supply and fixing stainless steel butt hinges, medium weight, 100 mm long, complete all as specified and directed.
Supply and fixing stainless steel butt hinges, medium weight, 75 mm long, complete all as specified and directed.
Supply and fixing butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100 mm long, for PVC doors complete all as specified and directed.
Supply and fixing 140 mm door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring fixed in door, complete all as specified and directed.
Supply and fixing in repair 140 mm door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring fixed in door, complete all as specified and directed.
Supply and fix hasp & staple, safety type, aluminium anodised, 100mm size, fixed with screws, complete all as specified and directed.
Supply and fix in repair hasp & staple, safety type, aluminium anodised, 100mm size, fixed with screws, complete all as specified and directed.
Supply and fixing 125 mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.
Supply and fixing in repair 125 mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.
Supply and fixing 150 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed.
Supply and fixing in repair 150 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed.
Supply and fixing Aluminium alloy, anodised, sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.
Supply and fixing in repair Aluminium alloy, anodised, sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.
Supply and fix in repair Door seal strip with plastic beading complete all as specified and directed.
Material & labour for providing cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in filling in steel chowkhats, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed
Material and labour applying two coats of synthetic enamel paint over and including a coat of pink primer, on new wooden surfaces over 10cm width or girth, including preparation of wooden surface, complete all as specified and directed.
Material and labour, applying two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed.
Taking down existing aluminium doors/windows of size exc 1.5 sqm and re-fixing after tightening loose screw including replacement of unserviceable screw complete all as specified and directed.
Material and labour for replacement of damaged aluminium beading of aluminium doors windows with new beading complete all as specified and directed.
Material and Labour for replacement of un-serviceable rubber packing of aluminium door & window including taking down carefully glass panels & re-fixing the same complete all as specified and directed.
Supply and fix 4.8mm thick tinted Sheet glass, ordinary quality and in aluminium doors & windows with rubber packing in square n exc 0.5 sq. m in each pane including hacking out old broken glass (any thickness, size from aluminium beading) complete all as specified
Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
Supply and Fix in repair 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed.
Supply and Fix in repair Door closer aluminium extruded body hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.
Note: The total amount shall subject to adjustment of credit of Rs 36785.00 for old Materials as per Schedule of Credit
M/S ASHWANI KUMAR & CO.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .