SITC of Automatic Fire Detection and Fire Alaram Panel - In Replacement of faulty and life expired- in 1st and 2nd floor and Integration of all AFD and FA panels at Telephone Bhawan, Bhubaneswar.

Amount

Supply, installation testing and commissioning of following Zones UL listed Microprocessor based Fire Alarm Control Panel Made of 16/18 SWG CRCA sheet powder coated, finish suitable for operation with 220V 50HZ AC mains power supply with standby battery backup 24Volt DC power supply and built in charger (without batteries) , normal operating voltage 24 v DC, compatible with all types of conventional detectors, manual call points and normally opened dry contact devices, 16X2 Dot matrix display, fully compatible with UL-864 and NFPA-72 etc. complete as required as per details specifications. (make- Agni Instruments / Agni Devices/GST / Honeywell / system sensor / Ravel)

12 Zone Main/Local Control panel without PA system

14 Zone Main/Local Control panel without PA system

Supply, installation, testing and commissioning of UL listed, CE certified 2 wire conventional Photo electric / Ionization type Smoke detector with base (Blinking LED type) made of ABS plastic with all accessories, suitable for operation on 24v DC, internal protection class: IP23, dual pulsing LED with 3600 visibility, relative humidity: ≤95%; non-condensing and EN54 compliance of approved make etc. as required. (Make- Apollo / GST/ Honeywell / System sensor)

Supply, installation, testing and commissioning of electronic hooter cum speaker made of 16/18SWG CRCA sheet duly powder coated with PO red colour, output not less than 80db @25mtr, LMT with adjustable sound output of 2.5-watt,5-watt, suitable knock out for cable entry from top suitable for operation on 100/70-volt RMS AC supply etc. as required. (Make- Apollo / Honeywell / GST/ system sensor/ Ravel /Agni)

SITC of manual push button station (pill box) Manual Call Point in MS Housing for Conventional Fire Alarm System with glass for breaking up in case of fire and hammer with chain etc. (Make- Apollo / Honeywell / GST/ system sensor/ Ravel /Agni)

SITC of twin LED type response Indicators with suitable 16-gauge M.S./Alumunium box, acrylic sheet cover of min 2mm thick LED etc. as required. (Make- Apollo / Honeywell / GST/ system sensor/ Ravel /Agni)

Supply and laying of following size FRLS PVC insulated and PVC sheathed copper conductor unarmoured heavy duty flexible cable on surface/recess for fire alarm devices etc. as required. (ISI)

2 CORE X 1.5 SQ MM

4 CORE X 1.5 SQ MM

Supply and laying of following size FRLS PVC insulated and PVC sheathed copper conductor armoured heavy duty flexible cable on surface/recess for fire alarm devices etc. as required. (ISI)

2 CORE X 1.5 SQ MM

4 CORE X 1.5 SQ MM

Supplying and making indoor end termination with brass compression gland and copper lugs for 2 core, 1.5 Sq. mm size of PVC insulated and sheathed/XLPE copper conductor cable of 1.1 KV grade as required.

Supplying and fixing of 4-way PVC brass lead connector for connection of existing 2x1.5sq mm Cu. Cond. & 4x1.5 sq mm Cu Cond. etc as required.

S/F ABS round box / MS Box on ceiling for fixing the detectors etc. as reqd.

Supplying and fixing following size PVC box on surface/recess for fixing of connector etc. as required.

SITC of 12V sealed maintenance free battery of not less than 7AH capacity with all accessories etc as reqd.(Exide /Amco/S S Make)

Supplying & fixing of wall mounted auto glow Signage Fire Exit Sign Board 3mm PVC Sheet with high Glow intensity in total Darkness. (Red and Green colour with exit symbols as per requirements)

Dismantling the existing 4/6 Zone Microprocessor/Manual type Fire Alarm panel from various floor i/c disconnection of all outgoing cable , marking all the cable with their zones i/c keeping/shifting the same to Electrical store etc complete as required.

Re-arrangement i/c modification of fire cable from 2nos Old fire panel & connecting the same in 4-way connector , proper fixing of cable after dismantling from existing route i/c re-connection of the new cable & old cable at new existing fire panel etc complete as required.(2nd FL.) )

Re-arrangement i/c modification of fire cable from 1no Old fire panel & connecting the same in 4-way connector , proper fixing of cable after dismantling from existing route i/c re-connection of the new cable & old cable at new existing fire panel etc complete as required.(Gr FL.) )

Making arrangement for integration/connectivity of addressable fire panel at 4G core Data center & NGN Core at 1st Fl. to Microprocessor based Local/Main fire panel at 1st Fl. i/c connection of fire cable at both ends of the fire panel & Checking , testing for proper functioning & commissioning of the system etc. complete as required.

Making arrangement for integration/connectivity of 2nos LCP Cum MCP( 1st & 2nd Fl) to Main fire panel at Gr. Fl. i/c connection of fire cable at both ends of the fire panels & Checking , testing for proper functioning and working of existing detector/hooter with the above panel i/c cleaning of the old working detector and re-fixing of the same position( Gr. Fl & 2nd Fl) i/c rectification of minor faults, testing for proper functioning etc. complete as required.

Providing and making of FD & FA system floor plan of size 16"x12"(A3 Paper) in photo printing oil paper and mentioning location wise of their Zones i/c printing the same and binding with white polycarbonate sheet etc complete as required.

Providing and making of Evacuation floor plan of size 16"x12"(A3 Paper) for 1st floor in photo printing oil paper and making the layout by mentioning all room location etc i/c printing the same and binding with white polycarbonate sheet etc complete as required.