CONSTRUCTION OF SHEDS WITH HARD SURFACE AT VARIOUS LOCATIONS AT AF STN AGRA

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, including forming bottom surface for laying of pipes/ cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc. 250m but not exc 500 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for reinforced cement concrete M-25 Design Mix (using 20mm graded stone aggregates) as in footings, foundation, beam, plinth beams, bases for columns etc complete all as specified and directed.

M&L for reinforced cement concrete M-25 Design Mix (using 20mm graded stone aggregates) as in columns ,pillars, post and strut etc complete all as specified and directed.

M&L for use & waste of form work to sides of concrete foundations ,footings,bases of columns ,raft beams ,sides and sofit ( if any) of foundation and plinth beams and similar work or to better, fair finished surface of concrete etc complete all as specified and directed.

M&L for use & waste form work to sides of pillars, posts, strut, piers, columns and stanchions, square or rectangular on plan, finished the surface rough of concrete etc complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns hooking ends and binding with mild steel wire anealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 6 to 8 mm dia in stirrups, cut to length bent to shape required, including cranking, bending, spirally for hooping for columns hooking ends and binding with mild steel wire anealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished the surface even and smooth (without using extra cement) including Two coats of cement base paint complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft / loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161- 1979 grade St.-240 including guddet plate, pole etc complete all as specified and as directed. Note :- Work shall be executed upto 10m height.

S&F Rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410 (Gde E 250) quality A complete all as specified and as directed. Note :- Work shall be executed upto 10m height.

S&F Rolled mild steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe-410 W (Gde E 250) quality A complete all as specified & directed.

M & L for prepararing new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed.

S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall of any height, fixed with suitable 'J' hook with bolts, washers etc complete all as specified & directed.

S&F Prepainted galvalume aluminium zinc coating GI based plain steel sheet 1.00 mm thick of an colour having tensile strength of 550 Mpa as in ridge of roof covering / cladding to wall, fixed with suitable 'J' hook with bolts, washers etc complete all as specified & directed.

M & L for prepararing new or previously untreated steel surfaces of any description not exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Hardcore of broken stone or broken boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 50mm thick sand cushioning / filiing under floor or laid dry to the profile under interlocking block including watering and consolidation complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (using old size bricks), straight or curved on plan, exc 6M mean radius, built in CM 1:6 complete all as specified and directed .

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in flooring etc, finished the surafce fair and even complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block of approved shape and size conforming to IS: 15658-2006 of 80mm thickness, M-40 grade without correction factor for chamfering, with grey cement and pigment complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of approved shape and size conforming to IS: 15658-2006 of 60mm thickness, M-35 grade without correction factor for chamfering, with grey cement and pigment complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in kerbs stone, coping, apex stone, anchorage block of any scetion with plain fair face , rounded or chamfered on edges including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L for PCC (1:2:4) type B2 (using 40mm graded stone aggregates) as in surface channels and drains complete all as specified and directed.

M&L for Mild steel bolts, purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 12 and not exc 20mm dia of neck and not exc 30cm long complete all as specified and directed.

M&L for point wiring for One light/fan/exhaust fan point controlled by one way 5 Amp switch complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed cable FRLS in and including PVC conduit ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.6 mm factory made and painted with stove enameled black paint with top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 1.5 sqmm stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories all as specified and directed.

Decsription all as per srl item no. 31 above but for 3/5 pin socket outlet for 5 Amps on independent board with 1.5 sqmm PVC insulated, unsheathed single core multistranded copper conductor cable 1100 volts grade including 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable as earth continuity conductor complete all as specified & directed.

S & F switch piano, flush type single pole, one way 5/6 Amps, 240 volts complete all as specified & directed.

S & F switch piano, flush type single pole, one way 15/ 16 Amps, 240 volts complete all as specified & directed.

S & F socket outlet 2 in 1, 3/5 pin , 5 &15 Amps, flush universal type complete all as specified & directed.

S&F surface/wall mounting LED batten, 22 watt LED lamp extruded aluminium housing provided for efficient heat dissipating with polycarbonatel diffuser & intergrated industrial grade heavy duty electronic driver including 22 Watt LED complete all as specified and directed.

S&F factory made sheet metal enclosure MCB DB 240 volts, 4 ways with 200A rated bus bar, SPN, double door type IP43 suitable for housing MCB/Isolators and fixed the same on & including mild steel hold fasts of suitable size & shape after grouting the hold fasts in the wall with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified & directed.

S&F MCB, SP, AC, 240 volts of 06 to 32 Amps capacity "C" series, 10 KA and making connections complete all as specified & directed.

S&F MCB SPN 40 to 63 Amp 240V, 'C' series 10 KA, complete all as specified and directed.

S&F LED street light fitting 60 watt, 230 V, AC, outdoor type with high pressure die cat aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal managment in multiple optics, IP-66 protection complete all as specified and directed.

S&F 1.50 Mtr long house service bracket, made out of 40mm dia light grade GI pipe, bent to shape including MS hook & stay or guy and fixed to wall/ poles including all necessary nut/ bolts complete all as specified and directed.

Supply and fixing on pole / wall, PVC insulated, heavy duty electric cable, unarmoured of size 10 Sqmm 2 core with stranded aluminium conductor, flat / round with and including fixing arrangement complete all as specified and directed.

M/S NARENDRA & COMPANY (BID ID -3471846)

Jain prem construction (BID ID -3466814)

rohan traders (BID ID -3463133)

JEE JEE BUILDERS (BID ID -3466272)