SPECIAL REPAIR OF GUN HOUSE PONAPPA ROAD, NEW CANTT, PRAYAGRAJ AND PROVN OF GALVALUME SHED ON FRESH ISSUE AREA OF 264 COY ASC (SUP) TYPE C AT NEW CANTT PRAYAGRAJ

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surface 600x300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc complete all as specified and directed.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic double charged coloured tiles 08-09 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic light shade double charged tiles 08-09 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in walls,skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for exterior grade tiles 08-09 mm thick (square/ rectangular) polished, area of each tilesexceeding 0.11 sqm but not exceeding 0.18 sqm in walls,skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 10mm rendering in CM 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed. (Note - Average thickness shall not exceed 40mm complete all as specified and directed.

M&L for rendering 10 mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:3 complete all as specified and directed.

M&L for normal water proofing treatment on roof slab consisting with following operations:- (i) Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wire brush & dusting, Apply a layer of bituminous primer conforming to IS 3384 @ 0.4 Lit/m2 on the surface. Laying 3mm thick APP membrane habing non-woven polyester matt at core and under surface coated with plastic polythene film. Laying shall be done using butane torch maintaining 100mm ie overlap & 150mm end overlap, sealling all overlaps complete including treatment at all junctions & corners. The membrane shal be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200mm height above finished floor (Note- The membrane shall have tensile strength of 700N/5cm in longitudinal direction and 450N/5cm in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability, < 0.5% when tested as per ASTM D 5147. The laying of the membrane shall be done through authorized applicator of the manufacturers' (ii) Again applying hot bitumen 85/25 @ 1.2 Kg per Sqm over water proofing membrane.

M&L for preparation of new or previously untreated surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of aluminium paint, complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc1.5 but n. exc 4 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F for 12mm thick Milky white frosted toughened glass with etching for making good any surface/wall door etc including necessary fittings, channel rails etc quality as approved, fixed with jointing material PVC flap at bottom and including cutting of holes in glass including of 20mm dia 450mm long stainless steel handles, suitable magnet to hold shutters etc complete all as specified and directed.

S&F for solid PVC molded door frame of size 50mm x 95mm made out of 5 mm single side prelam PVC sheet complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed.

S&F for 200 mm long SS anodized barrel tower bolt of extruded section complete all as specified and directed

S&F for SS 125mm butt hinges of medium weight hinge , pin anodized complete all as specified

S&F for extruded SS bow handle, fabricated type,150mm long complete fixed with steel screws complete all as specified and directed.

Demolition of brick work built in cement mortar and removing rubbish complete all as specified and directed.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc complete all as specified and directed.

Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Description same all as per item no 27 herein before but refixing old steel tubing complete all as specified and directed.

Description same all as per item no 28 herein before but refixing old steel tubing complete all as specified and directed.

M&L for Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete all as specified and directed.

S&F in repairs long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F for CP angle/stop valve long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type complete all as specified and directed.

S&F in repairs shower CP fancy type 100 mm including shower arms complete all as specified and directed.

S&F in repair 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs wall mixerss with provn for over head showers with 115 mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed Make: Jaguar Cat Part No. CON- 273KNUPR or equivalent as per approved make list.

S&F in repair Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. Make: Jaquar Cat Part No. ACN-1111SM equivalent as per approved make list.

S&F in repair stainless steel soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed. Make: Jaquar Cat Part No.ACN-1131N equivalent as per approved make list.

S&F in repair vitreous china wash down water closed pan with attached flushing cistern (Pedestal pattern) with 'P' or 'S' trap white , including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.(Single piece WC),

S&F Health foucet including PVC pipe 1.20m long with brass nuts for EWC, fixed in repairs complete all as specified and directed.

S&F in repair PVC connection 15 mm bore, 600 mm long complete with both ends unions complete all as specified and directed.

S&F in repair vitreous china table top wash basin, white, oval shape of size 560 X 450mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

S & F in repair Brass CP central hole long type mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore for WHB complete all as specified and directed.

S&F in repair Brass chromium plated 32mm bore bottle traps of approved make for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed. Make:Jaquar

Supply and fix/fabricate in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board laminated /white sheet complete all as specified and directed. Make : Rajshree or equivalent all as specified and approved by Accepting Officer.

Supply only in repair stainless steel acessories suitable for kitchen cabinets as under:- (a) Stainless steel basket (plain) of size 50cmx37cmx10cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make. Make: Life style Cat part No WA/POB/15204 or equivalent as approved

(b) Stainless steel thali basket (11-13 division) of size 50cmx37cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved. Make: Life style Cat part No WA/TB/15208 or equivalent as approved

(c) Stainless steel Plate basket (11-13 division) of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved. Make: Life style Cat part No WA/PTH/15206 or equivalent approved

(d) Stainless steel Partition basket of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make. Make: Life style Cat part No WA/PRT/17206 or equivalent approved

(e) Stainless steel Cutlary basket of size 50cmx37cmx10cm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approvedMake: Life style Cat part No WA/CUT/15204 or equivalent approved

(f) Stainless steel basket (plain) of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/POB/15206 or equivalent approved

(g) Stainless steel bottol full out of size 50cmx40cmx16cm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make. Make: Life style Cat part No FF/BPO/62018 or equivalent approved

(j) Telescope basket (channel) 18/20inch length extruded MS galvanised over rollers of approved make

(k) magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed.

(m) 150 mm dia SS handle fancy type polished bright finish complete all as specified and directed.

(n) 100 mm dia SS handle fancy type polished bright finish complete all as specified and directed.

(o) Continuous (Piano) hinges, mild steel , bright finish, 30 mm width of flaps (when open).

S&F in repair stainless steel sink without drainage board(bowl type), made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 620 mm X 510 mm with bowl size 555 mm x 380mm x 225 mm complete all as specified and directed.

S&F in repair Stainless steel plate rack(Utensil Rack) of size (900mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts,bolts & washers complete all as specified and as directed.

S&F in repair 25mm dia SS , curtain rails/ drapery rod including end brackets and end knobs of any shape and design complete all as specified and directed.

Dismantling water storage tank exc 500 & n’ exc 1000 ltr capacity complete all as specified and directed.

S & F for 1000 ltr capacity rotational moulded polyethene water storage tanks (white colour three layer) (Cylindrical vertical with closed top) hoisted and fixed in position including tank nipple etc all as specified in SSR part I

Demolition/taking down PVC/CI drain/Rain Water Pipe under floor or wall of internal dia 75/100 mm, set in cement mortar/ Bricket (working height not exc. 10 mtrs ) complete all as specified and directed.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore complete all as specified and directed.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75 mm bore, provided with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110 mm bore, provided with access door complete all as specified and directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 75 mm bore, provided with access door complete all as specified and directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 110 mm bore, provided with access door complete all as specified and directed.

S&F PVC (SWR) branch piece, double (double Y) equal or unequal, 110mm bore fixed to wall in west pipe complete all as specified and directed.

S&F PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

M&L in repair PVC (SWR) floor trap plain with grating in cluding jointing with solvent cement 75/100mm dia complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed.

M&L for Rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade over a coat of 1 mm thick white wall care putty complete all as specified and directed.

M&L for preparation and complete removal of existing treatment from old plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of 1mm thick white wall care putty complete all as specified and directed.

M&L applying 1-2mm thick white cement based water proof wall care putty external for preparing new plastered decorated surfaces of wall and applying two coat of exterior emulsion paint (Apex/Weather coat) white or tinted as approved complete all as specified and directed.

M&L for complete removal of existing treatment from old decorated surfaces of wall including cornices etc by using metal plate,wire brush etc applying 1mm thick white cement based water prrof wall care putty external for preparing old plastered decorated surfaces of wall and applying two coat of exterior emulsion paint (Apex/Weather coat) white or tinted as approved complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil emulsion distemper (OBD) of approved shade over a coat of 1 mm thick white wall care putty complete all as specified and directed.

M&L Granite 16-18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed in CM 1:4 including cutting, polishing, rubbring & moulding of edges including making hole in granite slab for gas pipe complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for incl removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L for first or premium quality heavy duty digital pavement tiles 400mmX400mmX10mm thick coloured for floor/pavement etc & jointed in neat cement slurry and pointed with white cement fixed with colour pigment to match colour of tiles including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for PCC type E2 1:5:10( using 40mm graded aggregate) as in sub base complete all as specified and directed.

M&L for M-35 grade factory made rubber moulded vaibratory cement concrete red and yellow coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved 80mm thick laid over and including 25mm thick sand cushion and joints filled with sand complete including dismantling of tiles all as specified and directed.

M&L for Rubber moulded chequered cement concrete tile 300mm X300mmX 25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including ridges complete all as specified and directed.

M&L for Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified and directed.

M&L for structural steel work with rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) quality A complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S&F 4mm thick E-boards tiles (Make: Everest) false ceiling with powder coated GI snap grid frame work (Make: Armstrong/Saint Gobain or equivalent as approved) including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick E-boards tiles of size 595x595mm of approved texure and finished complete with two coats of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.

S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.

S&F for 10mm thick plaster of paris ceiling(Gypsum false ceiling) to flat/curved surfaces including sunk or raised moulding with POP and finishing complete all as specified over GI frame work including all necessary drilling, cutting to fix electrical items complete all as spfd and directed with followings: (a) GI sheet channel made to shape 0X25X20 of 24 gauge fixed with rowel plug with screw 450mm centre to centre along with perimeter of walls. (b) GI sheet channel make to shape 50X40X40mm of 24 gauge placed at 600mm centre to centre from perimeter of wall except long wall (in one span). (c) GI sheet intermediate runner of size 45X10X10mm of 24 gauge fixed at 1200mm c/c leaving frame of one side wall (in other span) (d) GI sheet 25mm wide and 20mm gauge suspenders fixed with the screw steel fasteners to roof ceiling @ 1200mm c/c including plugging in RCC slab (e) GI wire mess fixed to framework complete all as spfd and directed.

Excavation in post holes ( or similar holes) in soft/loose soil each n. exc 0.50 Cum getting out, watering and removing surplus soil to a distance n. exc 50 m and making good surface complete all as specified and directed.

M&L for PCC 1;2:4 type B-1 using 20mm gragded crushed stone aggregate for post hole complete all as specified and directed.

M&L for ms iron post and struts including all necessary drilling,bolting or riveting screws, etc and similar work complete all as specified

M&L Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Grade E-250) Quality-A complete all as specified and directed.

M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Surface excavation n exc. 30 cm Depth and average 15 cm deep in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance n exc 50 mtr complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete complete as all spfd and directed by EIC.

M&L for 25 PCC (1:2:4) type B-1, 1:2:4 (20mm graded crushed stone aggregate) concrete complete as all spfd and directed by EIC.

M&L in Machine cut Plolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15mm thick screed bed in CM(1:6) complete all as specified and directed.

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for credit and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed.

M&L for point wiring with concealed on wall and surface wiring on ceiling/floor/column 2.5 sqmm (nominal area) FRLSH PVC insulated multi-stranded copper conductor single core including non metalic PVC conduit medium grade of not less than 20mm dia concealed in wall and modular sunken box factory made cover plate/crown plate any module as required at site with all accessories as specified including 2.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly for fan / light / exjaust fan/ bell point controlled by one switch and single conduit shall be used for each circuit complete all as specified and directed. Note:- 1. Cost of PVC conduit, with connected item to be included in the quoted rate. 2. M&L for cutting chases on walls / ceiling and making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate. 3. Modular metal box, cover plate & frame for any module to be included in the quoted rate.

Description same all as per item No. 104 here-in- above but for 3 pin 5 Amps switch socket on independent board with 2.5 sq mm copper cable complete all as specified and directed.

Description same all as per item No. 104 here-in- above but for 3 pin 15 Amps switch socket on independent board with 2.5 sq mm copper cable including 2.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth complete all as specified and directed.

Description same all as per item No. 104 here-in- above but for 3 pin 15 Amps switch socket n on independent board with 4 sq mm copper cable including 4 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth.

Description same all as per item No. 104 here-in- above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed.

S&F modular switch 1 way, 6 amps, 230V AC, one way complete all as specified & directed.

S&F modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module complete all as specified & directed.

S&F modular switch flush type 16 amps, 230V AC single pole one way complete all as specified & directed.

S&F modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed.

S&F modular bell push flush type 6 amp, 1 module SP , 230V AC complete all as specified & directed.

S&F call bell Dingdong type AC 230 Volts single pole complete all as specified and directed. Make Anchor/havells/legrand

S&F for ceiling rose surface backelite three terminals complete all as specified and directed. Make Anchor/havells/legrand

S&F for modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection complete complete all as specified & directed.

S&F and replacement of LED tube light fittings (inverter type) decorative ultra slim linear fixture,20 Watt, efficiancy 120 Lm/watt ,4 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver, with all accessories prewired & includingconeecting up with 2 core flexible cppper conductor cable white in colour with sutable size & suitable for and mounting clamps complete all as specified and directed.

Supply & fixing and replacement of energy efficient LED light of 10 Watt of length - 02 Feet long, wide voltage protection range 140-270 Volt, 120 LM/watt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable suitable size white in colour complete all as specified and directed.

Supply & fixing and replacement of wall mounted fitting fancy type (City -2 type) with 9 watt LED bult inverter type including making connection with two core PVC insulated, sheathed copper conductor cable suitable size white in colour complete all as specified and directed.

Supply and fixing and replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 120 LM/watt 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl blades and repair, servicing, paiting if required and after repair to fix same place complete all as specified and as directed.

Taking down carefully Exhaust fan any sweep and any make after disconnecting the electrical connection, dismantling the accessories and repair, servicing, paiting if required and after repair to fix same place complete all as specified and as directed.

Taking down carefully LED light fittings any type any capacity and make safe custody and refixing the same complete complete all as specified and as directed.

Taking down carefully geyser any size and any make after disconnecting the electrical connection, dismantling the accessories and repair, servicing, paiting if required with Hot water connection pipe 2 Nos and after repair to fix same place complete all as specified and as directed.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TP & N 4 way (vertical load line distribution board) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with 4 pole MCCB 100Amp 25 KA - 01 fixed type Nos and SP MCB 63 Amps 'C' curve 10 KA - 12 Nos outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB all as specified. NOTE :-(a) MCB and MCCB cost shall be included under respetive item of sch. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

M&L in replacment of two single core (submain) FRLS PVC insulated cable of 6.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 6.00 sqmm nomianal dia as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as directed. Note :- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

Taking down carefully energy meter after disconnecting the electrical connection, refixing or replacement the energy meter in same position including all electrical connection and material and labour all as specified and as directed.

Schedule of Credit (MINUS) Rs. 31397.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

Channa Brothers and Co. (BID ID -3374454)

Technological Associates (BID ID -3365795)

YASH ENTERPRISES (BID ID -3373541)