SPL REPAIRS TO ROAD FURNITURE, ROAD AND CONNECTED ITEMS AT VARIOUS LOCATION AT GWALIOR MILITARY STATION

Scarifying or picking graveled macadam or bituminous macadam surfaces in area exc 400 sqm each and depth exc. 50 mm but n. exc 100 mm complete all as specified and directed.

M&L for WBM of 100mm thick (compacted thickness) one layer with coarse aggregate (granite or basalt stone) of grading 2 (63 to 40 mm size) spread, rolled and consolidated to gradient and camber required with power roller 8 to 12 Ton complete all as specified and directed.

M&L for WBM of 100mm thick (compacted thickness) (Except Stone) one layer with coarse aggregate (granite or basalt stone) of grading 2 (63 to 40 mm size) spread, rolled and consolidated to gradient and camber required with power roller 8 to 12 Ton complete all as specified and directed. Note: Stone/material obtained from serial item No 01 above.

M&L for preparing surfaces of un-surfaced WBM by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with using paving bitumen VG-10, @ 10 kg per 10 sq metre complete all as specified and directed.

M&L for Premix bituminous macadam with using paving bitumen VG-30, as 4 % of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed.

M&L for preparing old black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with using paving bitumen VG-10 @ 5 kg per 10 sq metre complete all as specified and directed.

M&L for providing bituminous premix asphaltic semi dense concrete (design mix) 30 mm consolidated thickness with 5.5% binder content by weight of total mix, with using paving bitumen VG-30 laid / spread uniformly by means of pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and as directed. Note : Filling of any pot holes (coming in the area to be re-carpeted) in the item not exc 30mm depth by material of premix asphaltic semi dense concrete is deemed to be included in the quoted rate.

M&L for Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, with using paving bitumen VG-10, putting in premixed bituminous macadam, well rammed and sealed with binder (paving bitumen VG-30) @ 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30mm complete all as specified and directed.

M&L for moorum /red bajri filling in floors or paving laid in layers n exc 15cm thick spread levelled and rammed including watering complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 1.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.