PETTY REPAIR AND ALLIED B/R WORKS IN TECH AREA AND REPAIR TO FLOORING, PLINTH PROTECTION, TILING, PLASTER, PLUMBING AND VARIOUS B/R RELATED WORKS IN VSV, TECH AREA AND MES COLONY UNDER GE (AF) TUGHLAKABAD

Amount

Demolition of cement concrete of any type description and in any position complete all as specified.

M&L for 100 mm thick cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base floor complete all as specified and directed by Engr-in-charge.

M&L for machine pressed coloured rubberisd moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 to 60 mm thickness M-35grey cement and pigment including laid over 25 mm thick layer of sand cushioning complete all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises all specified.

M&L for 20 cm x 20 cm x 25 mm thick chequered cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement and no pigments complete all as specified and directed by Engr-in-charge.

M&L for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/ rectangular) of size not less than 300mmx300mm as in parking/hardstanding etc including set, jointed in cement slurry and pointed in white or coloured cement to match the colour/shades of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified.

S&F vitrified ceramic coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm in floors, including 15 mm thick screed in CM (1:6) complete including taking down existing tiling with bedding screed complete all as specified and directed by Engr-in-charge.

S&F vitrified coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm on vertical surfaces such as skirting including 10 mm thick rendering etc complete including taking down existing tiling with backing complete all as specified and directed by Engr-in-charge.

M&L for 75 mm thick cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection/ path laid in panel surface finished even and smooth while concrete is green without using extra complete all as specified and as directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 15 mm thick cement plaster (1:4) (1 cement :4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per Sqm, top layer 15 mm thick cement plaster (1:½:2) (1 white cement : ½ coarse sand :2 stone chipping 8 to 10 mm nominal size) in panels with aluminium beading groove (size of aluminium beading 10 mmx 10 mm) all around as per approved pattern including scrubbing and washing and colour (as per user direction) the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note : work can carried out upto 15 mtr height.

M&L for precast cement concrete blocks masonry with solid blocks exc 10 cm in width in PCC (1:2:4) TYPE B1 using 20 mm graded stone aggregate & set in CM (1:4) in walling as in kerb block, one edge chamfered and finished complete all as specified and directed by Engr-in-charge.

M&L for dubbing out average 10mm thick on irregular face of walls, chajjas, facia etc including taking down irregular plaster surfaces complete all as specified.

M&L for 15mm thick rendering in CM (14) on concrete or masonry surfaces mixed with water proofing compound @ 3% by weight of cement, surfaces to be finished even & smooth without using extra cement complete all as specified. Note - WPC shall be measured and paid separately

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint, over a coat of chalk whiting complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:6) to brick or concrete wall surfaces finished even & smooth without using extra cement including taking down the cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water etc before applying rendering complete all as specified.

M&L for preparation of new plastered surfaces of walls applying a coat of birla putty and applying two coat of oil bound distemper of approved tint, complete all as specified.

Supply only integral water proofing compound ISI Marked complete all as specified and directed by Engr-in-charge.

Cleaning of roof slab/chajja with sweeping with brooms, removing complete all as specified.

Taking up or down PPR/steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm complete all as specified and directed by Engr-in-charge.

Taking up or down PPR/steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm complete all as specified and directed by Engr-in-charge.

Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 15mm complete all as specified and directed by Engr-in-charge.

Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 20mm complete all as specified and directed by Engr-in-charge.

S&F 20 mm dia galvanized steel tubing, medium grade, with all fitting RM and fixed complete to walls celling or laid in floors complete all as specified and directed by Engr-in-charge.

S&F 15 mm dia galvanized steel tubing, medium grade, with all fitting RM and fixed complete to walls celling or laid in floors complete all as specified and directed by Engr-in-charge.

S&F in repairs of Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20 mm dia complete all as specified and directed by Engr-in-charge.

S&F in repairs of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) with 20 mm bore ball PTMT valve high pressure with polyethylene float and fly nut including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover.

S&F in repairs of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) with 20 mm bore ball PTMT valve high pressure with polyethylene float and fly nut including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover.

Demolition of cement concrete is reinforced (reinforcement) cut as required to facilitate demolition) In Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified.

Form work to sides & soffits of beams, lintels, shelves, cantilevers, overhangs etc with flat rough finished surfaces of concrete complete all as specified.

M&L for TMT bars 10mm dia and over, cut to length bent to shape required incl crancking, bending spirally for hooping for columns, hooking ends, drilling holes in existing walls/slabs and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conf to TMT bar complete all as specified and directed by Engr-in-charge.

M&L for RCC (1:2:4) type B1 by using 20 mm graded stone aggregate in Chajjas complete all as specified.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

M&L for providing 4mm thick asbestos cement designer building boards including galavanised iron anodized snap grid frame work for false ceiling size of grid 605 x 605mm thickness of section not less than 0.5mm of 3 mm dia GI hanger fixed with steel dash fastener including necessary alternation for fixing electrical fixtures including taking down old false ceiling boards with frame complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site complete all as specified and directed by Engr-in-charge.

Dismantling of AC/CGI/Fibre glass sheet corrugated/ semi corrugated sheet & ridge in roof covering complete all as specified and directed by Engr-in-charge.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed by Engr-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

S&F in repairs of venetian blinds, vertical type, 100 mm wide with polyester fabric of approved colour and pattern with aluminium fittings, and top rail and nylon buttons/loops etc fixed cuttings and alteration if necessary where ever AC/ coolers exists complete all as specified and directed by Engr-in-charge.

S&F in repairs of 18 mm solid PVC board of 1st quality of approved colour and fixed with screw, solvent cement/ adhesive complete all as specified and directed by Engr-in-charge.

S&F in repairs of 12 mm solid PVC board of 1st quality of both side white colour fixed with screw, solvent cement/adhesive complete all as specified and directed by Engr-in-charge.

Demolition of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge.

S&F in repairs PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and including PVC framework using 35mm wide sheet fillet all as specified.

S&F in repair for aluminium composite panel of 4.00 mm thickness which consist of 3mm thick thermoplastic cora of anti-toxic LDPE sandwiches between 2 skins of 0.5mm thick aluminium foils with outer surface finished with 30 PVDF & inner surface finished with thin coat of polyester paint, cladding panel fixed to aluminium grid of size n exc 2 Sqm and size of section shall be 38 mm x 50 mm x 1.05mm thick aluminium grid fixed to wall by angle iron clamps 25 x 25 x 6mm with spacing not more than 3 mtr c/c colour shade and pattern as approved by GE including all necessary steel scaffloding work including taking down complete all as speicifed and directed by Engr-in-Charge. Note: work can executed upto 15 m height.

S&F in repairs for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall of 160 mm dia complete all as specified and directed by Engr-in-charge.

S&F in repairs for PVC (SWR) bend of 160 mm dia complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china squatting pan “ORISSA PATTERN” size 580mmx440mm ‘white’ with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe anti syphonage pipe etc and removing old IWC outside MD land complete all as specified

S&F PVC in repairs PVC flushing cistern 10 ltrs capacity, low level, white with inlet, ball valve, float and handle including brackets complete all as specified

S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling, waste pipe and including PTMT pillar tap 15mm, waste fitting and union, removing old WHB outside MD land complete all as specified and directed by Engr-in-charge.

S&F in repairs, urinal half stall vitreous china coloured supplied with PTMT integrated spreader for even flow of water, installed with concealed 'Z' brackets, including brass chromium plated 32mm bore bottle trap, waste coupling complete all as specified and directed by Engr-in-charge.

S&F in repairs, urinal spreader of CP of any colour for fixing with 15 mm dia pipe complete all as specified.

Supply only PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified

S&F in repairs for bib taps 15mm bore (for iron pipe) cast copper alloy with fancy type chromium plated butter fly handle screwed down including fixed in repair all as specified.

S&F in repair for angle stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends including fixed complete all as specified and directed by Engr-in-charge.

S&F in repairs of PVC waste pipe 32 mm bore with PTMT waste coupling (half or full threaded) Min weight 45 gms complete all as specified and directed by Engr-in-charge.

S&F in repairs Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed

S&F in repars for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings

S&F in repairs of plastic syphon for low level cistern PVC of 10 ltr capacity complete all as specified.

Labour only for adjustment of float or ball valve or lever or handle to without replacement of any part of the high level cistern & OHT of any size complete all as specified.

S&F in repairs of PTMT stop cock, polythene ball with aluminium rod suitalbe for 15 mm dia of pipe complete all as specified.

S&F in repairs of PTMT stop cock, polythene ball with aluminium rod suitalbe for 20 mm dia of pipe complete all as specified.

S&F in repairs of 60 cm long PVC connection with two nos PTMT nut and rubber washers suitable for 15mm bore GI Pipe complete all as specified and directed by Engr-in-charge.

Labour only for petty repairs of leaking water in bib tap, pillar tap, stop cock, angle valve, WHB/wall mixture, concealed stop valve etc of any description any size by changing washer/jumper valve etc complete all as specified and directed by Engr-in-charge.

S&F in repairs of brass face spindle (half/full turn) of 15 mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, WHB/wall mixture of any description complete all as specified.

S&F in repairs of PVC waste pipe 40 mm bore with PTMT waste coupling (half or full threaded) Min weight 60 gms complete all as specified and directed by Engr-in-charge.

S&F in repairs of chromium plated grating of size 125 mm dia (with or without hole) for Nahani/Floor traps complete all as specified and directed by Engr-in-charge.

S&F in repairs of 125 mm size fancy type shower roses, brass chromium plated with arms for 15mm bore of pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs of 125 mm size fancy type shower roses, PTMT 195 mm long with 45 degree angled arm for 15mm bore of pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs of 50 mm bore of pipe low density (LDPE) of pressure rating 6 kg/sqcm fixed to wall or laid in floor etc including fittings complete all as specified.

S&F in repairs of PVC PTMT bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-charge.

Labour only for petty repairs of low level flushing cistern any size/description for leaking water by adjusting/replacing the washer and adjustment of lever require for making the cisten functional complete all as specified and directed by Engr-in-charge.

Removal of air lock/blockage of water in G I and PPR Tubing 15/20mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-charge.

M&L for draining out water from existing PVC water storage tank 500 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection, float valve and refixing after cleaning complete all as specified

M&L for draining out water from existing PVC water storage tank 1000 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection, float valve and refixing after cleaning complete all as specified

S&F in repairs Sink with drainage board made of stain less steel 1 mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460mm, bowl size 410x330x160mm complete all as specified and directed by Engr-in-charge.

S&F in repairs PVC ( SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110mm bore) including bend and flat iron clamp for proper fixing complete all as specified and directed by Engr-in-charge.

S&F 15 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including cutting grooves and making good in cement mortar 1:3 or PCC 1:2:4 for concealed tubing incl taking down old GI tubing 15mm dia complete all as specified and directed.

S&F 20 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including cutting grooves and making good in cement mortar 1:3 or PCC 1:2:4 for concealed tubing incl taking down old GI tubing 20mm dia complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and as directed.

S&F in repair water closet seat cover, white closed pattern with flat bottom cover & mild steel chromium plated hinging device complete all as specified and as directed.

S&F in repairs PVC flush pipe of 32mm dia pipe for connecting low level flushing cisten inclulding jointing to WC complete all as specified and directed.

S&F in repair small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union, tank nipple, tank connection etc of any size for 15mm bore GI (ISI marked)

S&F in repair small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union, tank nipple, tank connection etc of any size for 20 mm bore GI (ISI marked)

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified

S&F in repairs ISI marked hydraulically regulated door closer die aluminum body type complete suitable for door shutter width of 851 to 1000 mm and weight between 61 to 80 kg complete all as specified and directed by Engr-in-charge.

S&F in repairs 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-in-charge.

S&F in repairs 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate all as specified

S&F in repairs 75 mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified

S&F in repairs single legged aluminium floor door stopper 140mm long with alloy body and tongue anodised with hard drawn steel spring specified.

S&F in repair double action floor door spring hydraulically regulated made up of aluminium 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engr-in-charge.

Easing of wooden door shutters/Almn door/PVC door shutter/ Almn window (One unit shall comprising of one window/CB/ Showcase/irrespective of number of leaves) for properly closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc. complete all as specified and directed by Engr-in-charge.

M&L for replacement of wooden glazing beading of 2nd class hard wood straight (any size) finished wrought for glazing or gauged joinery for fixing wire gauge/securing glass pane complete all as specified and directed by Engr-in-charge.

S&F in repairs MS Helical door spring of size 300mm including roller plate complete fixed complete all as specified.

Easing of steel window shutter for properly closing/opening tightening of hinges by oiling, greasing or by replacing of new box type hinges including necessary cutting & welding complete all as specified and directed by Engr-in-charge. Note:- one unit shall be comprising of one window irrespective of no of leaves/shutter. work to be carried out up to 12m height.

M&L for 4 mm thick acrylic sheet n exc 0.50 sqm in each pane & fixed to steel window by drilling holes/punching/screwing fixed with beads with metal panel pins/spring clips in metal surrounds including taking down old glass with putty complete all as specified and directed by Engr-in-charge. Note: Work to be carried out up to 12m height.

S&F in repairs 4mm thick solid poly carbonate transparent sheet fixed to metel frame/Alu Door using aluminium beading clips screws etc complete as specified.

S&F 3 mm thick sheet glass of ordinary quality and glazing with oil putty in squares not exceeding 0.5 mm in each pane complete all as specified.

S&F in repairs of pillar tap 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe.

S&F in repairs of pillar tap 15mm bore dia PTMT with cap capston chromim plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe.

S&F in repairs fancy alumimum powder coated drapery rod 25mm dia including PVC Corner/knobs golden colour and M S bracket complete all as specified and directed by Engr-in-charge.

S&F in repairs for PVC tank cover for 500/1000 ltr capacity tanks including cover to be fixed in frame with threading system. The frame to be fixed with tank by 4 nos nut bolts and aroldite complete all as specified and directed by Engr-in-charge.

S&F in repairs 100 mm butt hinges type B-11, extruded brass, with mild steel hing pin, bright polished all as specified.

S&F in repairs 75mm butt hinges type B-12, extruded brass, with mild steel hing pin, bright polished all as specified.

S&F in repairs mortice lock brass 4/6 lever vertical type size of 100 mm with 3 key complete all as specified.

S&F in repairs health faucet with 1.5mtr long stainless steel tube and hook complete all as specified.

S&F in repairs of Wall mixture 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe.

S&F in repairs 1.0 mtr long alminium door seal with screws complete all as specified and directed by Engr-in-charge.

S&F in repairs kitchen plate rack of size 600x750 mm made of stainless steel 1 mm thick fixed on the wall with plugs, nuts & washers complete all as specified.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

S&F in repair welded steel wire fabric exc 4Kg per sqm welded to steel section at any position complete all as specified. Note : Work to be carried out upto 12 to 15 Mtr height

Taking down shutters of any description exc. 1 sqm and n. exc. 2 sqm each and removing from site complete all as specified and directed by Engr-in-charge.

S&F Flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on one sides and decorative on other side all as specified.

S&F of 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

M&L for preparing wood or wood based new surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.

S&F Butt hinges,100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-22 complete all as specified and directed by Engr-in-charge.

S&F in repairs brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and directed by Engr-in-charge.

S&F in repairs soap dish brass chromium plated fixed to wall with brass chromium plated screw complete all as specified and directed by Engr-in-charge.

FUTURE ENGINEERING (BID ID -3080524)

M/S S.K.Electricals (BID ID -3081260)

Deepak Electricals (BID ID -3081575)