Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹80.7 LAccepted-Finance | L1 | Accepted-Finance accepted | |
| 2 | L2₹82.2 L+₹1.4 L (1.76%)Accepted-Finance | L2 | Accepted-Finance accepted |
| Sl No | Description | Qty | Unit | MNM CONSTRUCTION L2 | SHRI BRINDHAVAN BUILDERS L1 |
|---|---|---|---|---|---|
| 1.00 | Earthwork excavtion for foundation by manual means for isolated combined and other type foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring ,shuttering ,bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10mts and initial lift of 2.00mts and clearing and leveling the site etc complete complying with standard specification and as directed by departmental officers | 230 | m3 | 275 ₹63,250 | 270 ₹62,100 Lowest |
| 2.00 | Supplying and filling in foundation and basement with filling crushed stone sand in layers of not more than 15cm thick well watered rammed and consolidated etc complete complying with standard specificationand as directed by departmental officers | 23 | m3 | 1,855 ₹42,665 | 1,815 ₹41,745 Lowest |
| 3.00 | Cement concrete 1:5:10 (One Cement five crushed stone sand and Ten hard broken granite jelly) using 40mm gauge HBG stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15cm thick well rammed ,consolidaed and including curing etc complete complying with standarad specification and as directed by the departmental officers - Mixing by manual means | 23 | m3 | 5,660 ₹1,30,180 | 5,555 ₹1,27,765 Lowest |
| 4.00 | Supplying and filling in foundation and basement etc with conveyed earth in layers of not more than 150mm thick layers well watered, rammed with surface vibrator and consolidated including conveyance charges etc complete complying with standard specification and as directed by departmental officers | 90 | m3 | 230 ₹20,700 | 225 ₹20,250 Lowest |
| 5.00Providing and laying in position ,standardised concrete mix M25 grade by insitu machine mix concrete adopting weighing batchmethod in accordence with IS 456-2000 using 20 mm and down gradedhard broken granite stone jelly for all RCC items of works with minimum cement content of 350kg/m3 and maximum watercement ratio of 0.50 ,including admixture (plasticizer /super plasticizer ) in recommended proportion as per IS: 9103 to accelerate , retard setting of concrete ,improve workablity without impairing strenght and durablity with about (5 cum ) 7730kg of 20mm machine crushed stone jelly and with about ( 3.3cum ) 5156kg of 10-12mm machine crushed stone jelly and with about ( 4.79cum) 7670 kg of crushed stone sand ,but excluding cost of reinforcement grill and fabricating charges ,centering and shuttering and also including laying ,vibrating with mechanical vibrators finishing ,curing etc and providing fixtures like fan clamps in the RCC Floor/roof slabs wherever necessary without claiming extra etc complete complting with standarad specification and as directed by departmental officers | |||||
| 6.00 | Upto basement level | 53 | m3 | 8,835 ₹4,68,255 | 8,675 ₹4,59,775 Lowest |
| 7.00 | For super structure | 53 | m3 | 8,975 ₹4,75,675 | 8,810 ₹4,66,930 Lowest |
| 8.00 | For First Floor Superstructure | 9 | m3 | 9,250 ₹83,250 | 9,075 ₹81,675 Lowest |
| 9.00Supplying and erecting Steel centering including necessary supports for plain surface for Reinfored cement concrete works such as column footing ,column pedestral ,plinth beams , grade beams ,staircase steps ,sill slabs etc which require only nominal strutting using mild steel sheets of size 90cmx60cmand 10BG stiffened with welded mild steel angles of size 25mmx25mmx3mm for boarding laid with silver oak joists of size 10cmx5cm & 7.5cmx5cmas supports runner ,vertical stiffener ,side supports and Top horizontal stiffener spaced at about 60cmto 90cm center tocenter or at suitable intervals etc complete complying with standard specification | |||||
| 10.00 | For column footing | 70.94 | m2 | 745 ₹52,850.3 | 730 ₹51,786.2 Lowest |
Tender Value
₹78.4 L
EMD Value
₹49,300
Closing Date
10 Dec 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AC/EO
Arulmigu Angalamman Temple at Othakalmandapam, Madukkarai Taluk in Coimbatore District.
Construction of Kitchen cum Dinning for Arulmigu Angalamman Temple at Othakalmandapam, Madukkarai Taluk in Coimbatore District.
2025_HRCE_625952_1
02/2025
Open Tender
Civil Works
Lump-sum
Otthakalmandapam
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹49,300
12 Dec 2025
24 Nov 2025
10 Dec 2025
24 Nov 2025
10 Dec 2025
24 Nov 2025
Amount
Earthwork excavtion for foundation by manual means for isolated combined and other type foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring ,shuttering ,bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10mts and initial lift of 2.00mts and clearing and leveling the site etc complete complying with standard specification and as directed by departmental officers
Supplying and filling in foundation and basement with filling crushed stone sand in layers of not more than 15cm thick well watered rammed and consolidated etc complete complying with standard specificationand as directed by departmental officers
Cement concrete 1:5:10 (One Cement five crushed stone sand and Ten hard broken granite jelly) using 40mm gauge HBG stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15cm thick well rammed ,consolidaed and including curing etc complete complying with standarad specification and as directed by the departmental officers - Mixing by manual means
Supplying and filling in foundation and basement etc with conveyed earth in layers of not more than 150mm thick layers well watered, rammed with surface vibrator and consolidated including conveyance charges etc complete complying with standard specification and as directed by departmental officers
Providing and laying in position ,standardised concrete mix M25 grade by insitu machine mix concrete adopting weighing batchmethod in accordence with IS 456-2000 using 20 mm and down gradedhard broken granite stone jelly for all RCC items of works with minimum cement content of 350kg/m3 and maximum watercement ratio of 0.50 ,including admixture (plasticizer /super plasticizer ) in recommended proportion as per IS: 9103 to accelerate , retard setting of concrete ,improve workablity without impairing strenght and durablity with about (5 cum ) 7730kg of 20mm machine crushed stone jelly and with about ( 3.3cum ) 5156kg of 10-12mm machine crushed stone jelly and with about ( 4.79cum) 7670 kg of crushed stone sand ,but excluding cost of reinforcement grill and fabricating charges ,centering and shuttering and also including laying ,vibrating with mechanical vibrators finishing ,curing etc and providing fixtures like fan clamps in the RCC Floor/roof slabs wherever necessary without claiming extra etc complete complting with standarad specification and as directed by departmental officers
Upto basement level
For super structure
For First Floor Superstructure
Supplying and erecting Steel centering including necessary supports for plain surface for Reinfored cement concrete works such as column footing ,column pedestral ,plinth beams , grade beams ,staircase steps ,sill slabs etc which require only nominal strutting using mild steel sheets of size 90cmx60cmand 10BG stiffened with welded mild steel angles of size 25mmx25mmx3mm for boarding laid with silver oak joists of size 10cmx5cm & 7.5cmx5cmas supports runner ,vertical stiffener ,side supports and Top horizontal stiffener spaced at about 60cmto 90cm center tocenter or at suitable intervals etc complete complying with standard specification
For column footing
For grade beam
Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square ,circular Rcc columns etc which require only nominal strutting using mild steel sheets made of 10gauge thick weided with MS angle size 40mmx40mmx5mm and supported by steel adjustable telescopic props of size 2mx2mx2m made with outer steel pipe with dia 50mm and inner steel pipe with dia 40mm etc complete in all floors complying with standard specification- For columns
Supplying and erecting centering for plane surfaces such as RCC floors/roof beams ,lintels ,cantilever beams ,bed blocksetc with necessary supports and strutting upto 3.60m height in all floors with all cross bracing using MS sheets made of 10 gauge thick weided with MS angle of size 25mmx25mmx3mm for boarding laid over steel adjustable span of size 2mx2m and silver oak joists of size 10x5cm spaced at 50cmto60cm c/c and supported by steel adjustable telescopic props of size 2mx2m made with outer steel pipe with dia 50mm and inner steel pipe with dia 40mmspaced at not more than 50to 60cm c/c etc complete complying with standard specification . steel adjustable span and steel adjustable telescopic props shall be provided as directed by departmental officers For lintels & Roof beams
For lintels
For Roof beams
Supplying and erecting centering for plane surfaces such as RCC floor slab ,roof slab ,loft ,landing slabs ,etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracing using MS sheets made of 10 gauge thick weided with MS angle of size 25mmx25mmx3mm for boarding laid over steel adjustable span of size 2mx2m and silver oak joists of size 10x5cm spaced at 50cmto60cm c/c and supported by steel adjustable telescopic props of size 2mx2m made with outer steel pipe with dia 50mm and inner steel pipe with dia 40mm etc complete complying with standard specification . steel adjustable span and steel adjustable telescopic props shall be provided as directed by departmental officers For Roof slabs & Kodungai
For Roof slabs
For Kodungai
Supplying fabricating and placing in position of mild Steel /Ridded Tor steel Reinforcement grills of all variety like HYSD/CTD/TMT and all grade like Fe 500 ,Fe 550D ,Fe 500D etc for all RCC works as per design given including cost of steel ,reinforcment and GI binding wire ,wastage etc complete complying with standard specification and as directed by the departmental officers ( contractor has to make his own arrangments for the supply of steel reinforcment and binding wire ) .
For Basement level
For Super structure
Brickwork in cement mortar 1:5 ( one cement ,five crushed stone sand )using best quality Burnt clay brick of size 9"x 43/8'' x 23/4'' with class designation of 12.5 conforming to IS 1077-1992 for foundation and basement including cost of mortar plasticizer curing etc.,complete complying with stanard specification and as directed by departmental officers
Upto basement level
For super structure
Plastering with cement mortor 1:5 one cement and five piastering sand ), 20mm thick in all floors including mortar plasticizer at 200ml per 50kg of cement used ,curing etc complete complying with standard specification and as directed by the dep officers
Plastering with cement mortor1:3 ( one cement and three plastering sand ) 12mm thick mixed with wter proofing compound conforming to BIS at 2% by weight of cement used including mortor plasticizer at 200ml per 50kg of cement used ,finishing ,curing etc complete in all floors complying with standard specification and as directed by the departmental officers
Weathering course in broken jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layers of required slope and finished by beatin the concrete with wooden beaters of approved pattern ,keeping the surface constantly wet by springling lime jaggery water etc complete as per standard specification and as directed by the departmental officers
Finishing the top of roof with one course of machine pressed tiles 23x23x(1.6 -1.8) cm of approved quality laid in cement mortor 1:3 ,12mm thick mixed with water proofing compound 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortor mixed with red oxide and water proofing compound including curing etc complete complying with standard specification and as directed by the departmental officers
Paving the floor with best approved quality fine polished granite stone slabs of following size and synthetic grey ,paradise and similar varieties with machine cut edges laid over a cement mortor bed of 20mm thick using cement mortor 1:3 with required cement slurry and mortor plasticizer and laid in truepointing the joints with white cement mixed with matching colouring pigments etc complete complying with standard specification and as directed by departmental officers
Dadooing walls with printed design colour glzed tiles of size 300x200x6mm incement mortor 1:2 thick with mortor plasticizer and pointing the joints with water resistant tile epoxy grout at the rate of 0.27kg /sqm neatly in all floors ,curing etc complete complying with standard specification and as directed by departmental officers
Supplying and fixing UPVC (Un-Plasticized polyvinyl chloride) Windows of casement type (open) from the profile the size of outer frame 60x58mm and shutter profile are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter.the shutter will be provided with espag multi power point locks and also it operates as handle.The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of watereven at most ranging storms and in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work
Supplying and erecting pull and push type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc.,( Manually operated )
Supplying and fixing Mild Steel Grill for windows including cost & conveyance of all materials and fixing in position including priming coat etc., complete.
Painting new plastered wall surfacewith Two finishing coat of ready mixed (Emulsion ) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc complete complying with standrad specification and as directed by departmental officers
Painting New iron works such as gate, steel doors, windows, ventilators bars ,balstrades etc with two coats of best approved first quality and colour of synthetic enamel over the existing red oxide priming coat in all floors excluding cost of priming coat etc complete complying with standard specification and as directed by departmental officers
Paving prepolished concrete anti skid steps tiles of 20mm thick of approved quality and colour laid in accordance with IS 1443 in cement mortor 1:3 with required cement slurry and mortor plasticizer ,20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40kg/sqm curing etc complete complying with standard specification and as directed by departmental officers
Supplying laying andjointing UPVC pipes ( having working pressure 10kg/sqm ) of approved quality and best variety conforming to BIS of the following dia including cutting ,threading and fixing pvc specials using pvc adhesives (but excluding cost of specials ) and fixing into wall with teak wood plugs ,pvc clamps and screws making holes on wall or drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work /cement concrete and plastering neatly wherver necessary with necessary scafoldings charges etc complete complying with standard specification
50mm dia UPVC Pipe
20mm dia UPVC Pipe
15mm dia UPVC Pipe
Suppling and fixing in position best approved of BIS pvc rain water down fall pipes having a pressure of 4kg/sqcm including cost of necessary pvc shoe ,pvc bend ,cast iron gratings of required diameter and specials clamps ,brass screws ,nails etc and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc complete . The rate shall be inclucive of cast of removable cast iron grating . The pvc pipe line shall be fixed in wall with specials type of U clamp at the center of the pipe line in addition to the those for more than 3.0m pipe lenght etc complete complying with standard specification and as directed by departmental officers
Wiring with 2x1.5sqmm PVC insulated single core unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Module switch with module front plate and making good of the concealed portion with suitable colour for concealed PVC light point /fan point ( for electronic regulator ) (5 points / coil ) higher end etc complete complying with standard specification
Supply and fixing of 4 feet 20W single LED fitting with higher end complete on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting etc complete complying with standard specification
Supply and fixing of 1200mm (48" 0 Sweep AC Ceiling fan high speed complete with 2 module 100W fan step regulator ( H igher end ) with 600mm down rod on the existing fan ciamp etc complete complying with standard specification
Supply and fixing of 48 W LED street light fitting with LED ( H igher end ) with 32mm dia GI pipe (class B) with 1no 32mm GI bend complete on the rxisting post / on wall with PVC unsheathed copper leads with MS clamps and with painting etc complete complying with standard specification
Supply and fixing of 2nos 6A two module 5 pin socket ,2nos 6 A one module switch on suitable module surface mounting Box (GI) with module cover plate ( piastic ) on wall with connections Higher end (set piug ) etc complete complying with standard specification
Supply and fixing of 1 no 6/16A two module socket ,1 no 16A one module switch with module cover plate ( piastic ) on suitable module concealed box (GI) in flush with wall with connections Higher end etc complete complying with standard specification
Supply and Run of 2 of 6sqmm PVC insulated unsheathed FRLS copper conductor of 1100 v grade in suitable PVC rigid pipe concealed in wall and ceiling with continous earth wire connection of 6 sqmm copper wire and making good of the concealed portion etc complete complying with standard specification
Supply and Run of 2 of 4sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100 v grade in suitable PVC rigid pipe concealed in wall and ceiling with continous earth wire connection of 4 sqmm copper wire and making good of the concealed portion etc complete complying with standard specification
Supply and Run of 2of 2.5sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100 v grade in suitable PVC rigid pipe concealed in wall and ceiling with continous earth wire connection of 2.5 sqmm copper wire and making good of the concealed portion etc complete complying with standard specification
Supply and fixing of DP sheet enclosure with 40A30 Ma DP RCCB in flush with wall with earth connection etc complete complying with standard specification
Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no 32 A DP MCB switch as incoming and 10 nos 6A to 32 A SP MCB as outgoing in flush with wall with earth connection only Higher end etc complete complying with standard specification
Supply and fixing of 4 way vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (METAL) with 1 no 40A 4P MCB switch as incoming and 12 nos 6A to 32A SP MCB as outgoing in flush with wall with earth connection only HIGHER END etc complete complying with standard specification
Supply and run of 4 x 6sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100 v grade in 32 mm dia GI pipe( class B ) suitable bent at both ends with necessary angle iron up right and end supports for mains etc complete complying with standard specification
Supply and run of 4 x6 sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100 v grade in 32mm dia GI pipe ( class B) suitably bent at both ends with necessary angle iron up right and end supports for mains etc complete complying with standard specification
Supply and fixing of 32A (500v ) three phase meter box fabricated with 16 CRCA sheet comprising of with 3 nos of 32 fuse units 1 no 32 A neutral link ,1 no p 30mA ELCB/RCCB( Legrand) with earthconnection and copper wire for interconnections and with required accessaries on wall etc complete complying with standard specification
Earthing as per the ISI specification with an earth electrode of 2.10 meter class B GI pipe of dia not less than 40 mm with copper earth plate of size 125mm x 50 mm x 6mm with necessary funneling arrangments with necessary masonry work and with 38 mm RCC cover slab for the brick masonry etc complete complying with standard specification
Supply and Run of 1 of NO 8 SWG copper wire in suitable PVC rigid pipe on wall /floor/ground for earth connection etc complete complying with standard specification
GST 18 % in Figures
MNM CONSTRUCTION (BID ID -1530516)
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_748508.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.13 MB
BOQ_748508.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .