Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.2 LAccepted-AOC SHATYAM APPARTMENT 35 BALAI DAS CHATTERJEE ROAD HAKIMPARA SILIGURI 1 | JALPAIGURI | WEST BENGAL | 734001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹30.7 L+₹1.3 L (4.31%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹30.7 L+₹1.3 L (4.34%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹31.3 L+₹2.0 L (6.65%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹31.9 L+₹2.5 L (8.39%)Rejected-Finance SREE COLONY BAGDOGRA PO BAGDOGRA DIST DARJEELING WB | L5 | Rejected-Finance Not Lowest |
Tender Value
₹30.8 L
EMD Value
₹61,560
Closing Date
12 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
SPL REPAIR TO ROOF OF ADM BLDG OF AAO SILIGURI UNDER GE SEVOKE ROAD
2024_MES_637530_1
8301/SEV OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹61,560
Yes
29 Feb 2024
15 Jan 2024
20 Feb 2024
15 Jan 2024
12 Feb 2024
30 Jan 2024
16 Jan 2024 - 25 Jan 2024
Amount
Demolition of cement concrete (un reinforced) of any description and in in any position not otherwise specifically provided for, removing rubbish off the premises etc complete all as specified and directed.
Taking down PVC rain water pipe (any size or pattern) including all fittings head shoes etc complete all as specified and as directed.
Demolition of brickwork built in cement mortar and removing rubbish off the premises etc complete all as specified and directed
Dismantling timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed.
Materials and Labour for plain cement concrete (1:2:4) type B-1, using 20mm graded stone aggregate as in coping, kerbs, roof padding, water tank platform and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed.
Materials and Labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240
Supply & fixing rolled mild steel section including hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates FE-290 Gde E-165. Complete all as specified and directed.
Supply & fixing Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.
Supply & fixing mild steel expanded metal cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel memberss n .exc 4 kg/sqm complete all as specified.
Supply & fixing 0.56mm thick plain, aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (as in crumple joint) complete all as specified and as directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including dismantling old AC sheets complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , including dismantling old AC sheets complete all as specified and directed.
Materials and labour for preparing of new steel surfaces of any description , below 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Materials and labour for preparing of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Materials and labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in floors, plinth protection, path etc. finished the surface of concrete even and smooth without using extra cement, complete all as specified and directed.
Materials and labour for brick work with fly ash bricks old size straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
Materials and labour for brick work with fly ash bricks old size straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.
Materials and labour for rendering 20mm thick in two layers of 10 mm thick each in cement mortar (1:4) on fair faces of brick work or concrete surfaces,WPC shall be mixed with morter of top layer, finished even and fair, complete all as specified and directed. (Note: WPC shall be measured and paid separately as supply only)
Supply only integral Water Proofing Compound of approved make.
Materials and labour for preparation of new plastered surfaces of wall and applying 1mm thick wall care putty of approved make complete all as specified and directed.
Materials and labour for preparation of new plastered surfaces of walls and applying two coats of weather proof antifungal exterior emulsion paint (as per manufacturer instructions) of approved colour over a coat of damp proof primer complete all as specified and directed.
Materials and labour for complete removal of existing paint from surfaces of wall and applying two coats of weather proof antifungal exterior emulsion paint (as per manufacturer instructions) of approved colour over a coat of damp proof primer complete all as specified and directed.
Supply and fixing PVC (SWR) pipes 150mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 150mm bore with access door, complete all as specified and directed.
Supply and fixing PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 110mm bore with access door, complete all as specified and directed.
Expansion Joint Treatment:- Materials and labour for opening the existing installed system from expansion joint. Rain water pipeline also need to treated with polymer modified mortar. The existing surfaces shall be cleaned properly so as to free from dirt, oil grease, etc Apply mixed Thixotropic epoxy adhesive (Nitobond PC40 or equivalent of ASIAN/ BERGER/ SHALIMAR) using a serrated spreader. Remove central masking tape immediately and position non reinforced Hypalon membrane with release tape (Fosroc :-Expoband one or equivalent of ASIAN/ BERGER/ SHALIMAR ) into the high strength repair mortar (Fosroc Nitomortar PC40 or equivalent of ASIAN/ BERGER/ SHALIMAR ) adhesive. Roll firmly to displace trapped air and to ensure extrusion of thixotropic epoxy adhesive through the edge perforations. Apply a second layer of epoxy adhesive to the full width of the top surface of membrane. Remove central release film from membrane. Finally remove outer edge masking tapes and feather edge the epoxy adhesive ,Put an Aluminum strip 3mm thick and 15mm width at the edge of “L” portion to make the membrane in proper shaped and puncture from lapping portion, Protect the membrane with Aluminum strip (1.2mm STD) followed by nailing system complete as per manufacturer instructions and as directed.
Materials and labour for Supply and applying concrete surface with single component, fibre reinforced shrinkage compensated, polymer modified structural grade repair mortar at a thickness of 40mm. The repair mortar should have a compressive strength 45 N/mm2, flexture strength 7 N/mm2 and tensile strength 2.5 N/mm2 at 28 days and curing the treated surface with polymer based curing agent having moisture retention : <0.55 kg/ sqm as per ASTM C156 Drying time 3 hrs @ 23 degrees complete as per manufacturer instructions. Make:- FOSROC/ASIAN/ BERGER/ SHALIMAR. Note:- (i) Application shall be done by the authorized applicator of manufacturer as approved by GE.
Surface Preparation work prior to water proofing treatment of RCC roofs completely as directed, surface to be free from frost, surface laitance and contamination free from loose aggregate or other sharp protrusions with fairly smooth finish for applicaion of water proof coating primer, the surface thoroughly washed with water including removal of all existing treatment, bituminious membrane, tarfelt.screed concrete etc from RCC roof slab.
Materials and labour for Coving Treatment: Coving (50mm X 50mm ) to be done at all junctions with Styrene butadiene latex to be mixed with cement complete as per manufacturer instructions and as directed. Make:- FOSROC/ASIAN/ BERGER/ SHALIMAR. Note:- (i) Application shall be done by the authorized applicator of manufacturer as approved by GE.
Materials and labour for water proofing treatment on roofs, chajja etc., surface to be prepared free from frost, surface laitance and contamination free from loose aggregate or other sharp protrusions with fairly smooth finish for applicaion of water proof coating including removal of all existing treatment, bituminious membrane, tarfelt.screed concrete etc from slab, prime the surface with water, after that surface must be primed for sound, dry concrete prime using Primer and pitch free green/ white colour PU Based Liquid applied single component elastomeric waterproofing membrane with Nil Water permeability to be applied with brush at a minimum wet film thickness of 1.5 mm in 02 coats . The second coat should be applied in perpendicular direction to the first coat. The newly applied membrane must be cured by reaction with atmospheric moisture for a minimum 24 hrs to give a tough elastomeric waterproof membrane , including necessary ponding test to ensure impermeabilty after drying complete all as specified and directed including material and labour for necessary scaffolding and safety arrangement, complete as per manufacturer instructions and as directed. Make:- FOSROC/ASIAN/ BERGER/ SHALIMAR. Note:- (i) Application shall be done by the authorized applicator of manufacturer as approved by GE.
Materials and labour for providing and applying average 15 mm thick plastering with cement mortar (1:4) mixed with Integral waterproofing compound confirming to IS 2645 at the dosage of 200 ml/bag of cement over waterproofing system as per site requirement complete all as specified and directed. (Cost of waterproofing compound shall be included in quoted rate)
Taking out old existing APP membrane or any other roof treatment work, roughening surfaces of existing roof and removing debris from site including cleaning and washing down with water to remove all dust/dirt etc complete all as directed.
Materials and labour for brushing neat cement slurry with 3.0 kg of cement per sq metre all as specified and as directed.
Materials and labour for 10 mm thick rendering in cement mortar (1:4) over RCC roof surface to receive roof treatment finished even and smooth without using extra cement mixed with water proofing compound as per manufacturers instruction (WPC shall be measured and paid separately).
Materials and labour for for priming the roof surface by applying 0.40 ltr per sqm of bituminous primer conforming to IS-3384 for water proofing treatment applying evenly a coat of bituminous primer complete all as specified and as per manufacturer's instruction. ( Make of primer:-M/S TEXSA INDIA LTD / M/S STP LIMITED / IWL INDIA LIMITED /M/S Tiki Tar Danosa (India) Pvt Ltd )
Materials and labour for providing, laying water proofing treatment over plastered surfaces of RCC roof with following steps of work to be carried out through authorised person/applicator of manufacturer :- (a) Over the primed surface a layer of APP based polymeric membrane minimum weight of 3 kg/sqm of approved manufacturer minimum 3mm thick, reinforced with polyster non woven fabric (weighing not less than 150gms/sqm) shall be laid by torch application method. The side over laps of membrane shall be minimum75mm and the end laps shall be minimum 100mm and sealing all overlaps and joints shall be done as per manufacturer's instruction. (b) Make of primer and APP shall be of same manufacturer. (c) Application shall be done by the authorized applicator of manufacturer as approved by GE. ( Make of APP:-M/S TEXSA INDIA LTD (MOPLY-FP) / M/S STP LIMITED (SUPER THERMOLAY) / IWL INDIA LIMITED (HYPERPLAS)/M/S Tiki Tar Danosa (India) Pvt Ltd (Hydro Stop)
Materials and labour for providing 20-22mm thick hydraulically pressed concrete roof tiles (300mmx300mm/250mmx250mm) as per IS 1237, on roof/terrace, laid over 15mm thick bedding in cement mortar (1:4), joints grouted and flush poined in cement mortar (1:3) including mixing of WPC as per manufacturers instruction complete all as specified and directed.
BIJAN KUMAR DHAR
LIBERAL ENGINEER CONSTRUCTION
M S ALOK SAHA
M/S S.B. CONSTRUCTION
ASHOK MUKHERJEE
ANJALI CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .