REPAIR/ REPLACEMENT OF UNSV SUMMER/ WINTER APPLIANCES AND OLD VINTAGE WIRING AND CONNETED WKS AT MIL STN RATNUCHAK

Amount

Taking down carefully existing aluminium conductor point wiring (light / fan / socket or power point) complete, with all fittings such as switches, socket, regulator, ceiling rose, utility light fittings and lamp holders etc and removing materials from site and making good the disturbed surfaces of walls roof and floor etc as per existing specification complete all as specified and as directed.

Taking down existing unserviceable distribution board, switch fuse unit, enclosure for MCB / DB (inclusive of MCBs of any type and capacity) and making good the disturbed surface all as specified and as directed.

Taking down existing unserviceable submain wiring any size and making good the disturbed surface all as specified and as directed.

Taking down Electric meter any type including disconnection electrically and refixing the same at same or new location as directed and specified by the Engineer in charge.

Material and labour for point wiring for one light controlled by one,one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes ,Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface all as specified and as directed.

All as per item no-05 above but for one fan/Exh point controled by one piano switch on the same board with other switches or independent all as specified and as directed.

All as per item no-05 above but for one bell point controled by one bell push on the same board with other switches or independent all as specified and as directed.

All as per Item no 05 above but for one three pin switch socket outlet, 5 Amp on independent board all as specified and as directed.

All as per Item no 05 here-in-before but for one switch socket outlet, 5 Amp on same board with other switches all as specified and as directed

All as per Item no 05 here-in-before but for one15 Amp 5/6 pin switch socket outlet, independent with 4 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

Supply and fixing switch piano made of urea formaldehyde flush button single pole one way 6 amps all as specified and as directed .

Supply and fixing socket out let single made of urea formaldehyde 3 pin 6 Amp, flush type, 240 volts 50Hz, ISI marked complete all as specified and as directed at site by the Engrs-in-Charge.

Supply and fixing bell push, made of urea formaldehyde ,flush type 6 amps all as specified and as directed.

Supply and fix in replacement of Switch socket out let combination universal type, 2 in 1, 2 and 3 pin 5 Amp, piano flush type, 240 volts, complete all as specified and as directed at site by the Engrs-in-Charge.

Supply and fix in replacement of Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and as directed at site by the Engrs-in-Charge.

Supply and fixing in replacement single pole and neutral enclouser with two pin and earth plug and socket complete with one single pole MCB 20 Amps ,240 volts complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite three terminals made of urea formaldehyde all as specified and as directed.

Supply and fixing Lamp holder PVC case body of Bakelite with back plate made of urea formaldehyde suitable for batten fittings , all as specified.

Supply and fixing Electronic fan regulator stepped type with five step ,two module, 100Watt 240 volts , made of urea formaldrhyde complete all as directed.

Supply and fixing electronic ding dong door bell musical sound 230 volt ,AC single pole complete all as specified.

Supply and fixing LED light fitting 1x20 watt, 220 volts AC decorative box type with driver, holder including LED tube linght connecting up with three core flexible copper conductor cable suitable size from ceiing rose and taking down existing unserviceable luminaire complete all as specified and directed .

Supply and fixing fully diffused recessed mounted luminaire 2'x2' LED 36Watt suitable for POP/Gypsum false ceiling complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed.

S& F linear & compact 9/10 Watt mirror light with aluminium housing & integrated electronic driver having THD<20% .

Led Bulkhead fitting suitable for 7/9watt Led bulb designed non PIR as well as PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface including taking down old unserviceable submain wiring complete all as specified and as directed.

All as per item No- 25 but two single core 6 sq mm FRLS PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in concealed PVC conduit including 6 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete. Note:- Cost of PVC conduit, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted.

All as per item No- 25 but in existing conduite two single core 6 sq mm FRLS PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in concealed PVC conduit including 6 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete. Note:- Cost of PVC conduit, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted.

S&F in repair factory made epoxy powder coated Distribution board vertical TPN 4 ways (TPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one FP-MCCB 160/250 Amp as incomer and SP/TP MCBs outgoing including taking down of existing of unserviceable DB, complete all as specified and confirming to IS : 8623.

Supply and fix in repairs factory made epoxy powder coated Distribution board SPN 4 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing including taking down of existing of unserviceable DB, complete all as specified and confirming to IS : 8623.

Supply and fix in repairs factory made epoxy powder coated Distribution board SPN 8 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing including taking down of existing of unserviceable DB, complete all as specified and confirming to IS : 8623.

Supply and fix in repairs factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing including taking down of existing of unserviceable DB, complete all as specified and confirming to IS : 8623.

Supply and fix in replacement of Thermal magnetic release MCCB 4 pole 415 volt rapturing capacity 25 KA 0f size 63 amp complete all as specified.

Supply & fixing MCB Single Pole and Neutral (SPN) of capacity 40 Amps , 240 volts in proper position all as specified and as directed by the Engineer-in-Charge. (Make : Legrand , schneider Electric)

Supply & fixing MCB Single Pole (SP) of capacity 6 to 40 amps , 240 volts in proper position all as specified and as directed by the Engineer-in-Charge. (Make : Legrand , schneider Electric)

Supply and fix in repairs Single core unsheathed 1100 volts PVC-FRLS insulated wire with copper conductor(multistrand) ISI marked of size 1.5 Sqmm , complete all as specified and directed.

Supply and fix in repairs of Single core unsheathed 1100 volts PVC-FRLS insulated wire with copper conductor(multistrand) ISI marked of size 2.5 Sqmm , complete all as specified and directed.

Supply and fix in repairs Single core unsheathed 1100 volts PVC-FRLS insulated wire with copper conductor(multistrand) ISI marked of size 4.00 Sqmm , complete all as specified and directed.

Supply and fix in repairs of Single core unsheathed 1100 volts PVC-FRLS insulated wire with copper conductor(multistrand) ISI marked of size 6.00 Sqmm , complete all as specified and directed.

Supply and fix in repair of plug top 3 pin 16 Amps,240 volts.Make: Anchor/Philips

Supply and fix in replacement fan capacitor of 2.5/3.5 mfd suitable for ceiling fan and exahaust fan complete all as specified and directed.

Supply and fix PVC casing capping 20mm wide on wall/roof (ISI marked, interlocking type), with all fittings complete all as specified.

Supply and fix PVC casing capping 25mm wide on wall/ceiling (ISI marked,interlocking type) , with all fittings complete all as specified.

Supply and fix Laminated sheet bakelite 3mm thick, cutting to 9"x11" size, drilling holes for mounting switch socket/regulators, fixing screws and GI covers with cup head washers complete, all as specified.

Supply and fixLaminated sheet bakelite 3mm thick, cutting to 5"x7" size, drilling holes for mounting switch socket/regulators, fixing screws and GI covers with cup head washers complete, all as specified.

Supply and fix Laminated sheet bakelite 3mm thick, cutting to 7"x9" size, drilling holes for mounting switch socket/regulators, fixing screws and GI covers with cup head washers complete, all as specified.

Taking down carefully Solar heater water tank of any make, type & size, disconnecting water connection inlet and out let of tank and plug water flow, for repairs, descaling inner tank, replacement of heating elements thermostat, anti anode, refilling of distilled water as required including painting of water tank and refixing the same to original position after repairs and marking of MES No complete all as specified and directed.Note:- Cost of heating element with thermostat, inlet outlet adopter, air release valve, toughened glass will be paid in relevant items.

Taking down carefully Solar collector plate before taking down disconnecting water connection inlet and out let of collector plate plug water flow, descaling, with dilute acid, including replacement of unserviceable collector inlet and outlet flange with rubber gasket, refilling of distilled water as required and refixing the same to original position after repairs complete all as specified and directed.

Material & Labour for insulation to hot water pipe of size 15 to 25 mm by using glass wool and aluminium cladding, complete all as specified and as directed.

Material & labour for PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) for making rectangular cube of size 20X20X45cm for installation of solar collectors and support of hot water tank/ hot water pipes etc including frame work and demolition of old PCC blocks complete all as specified and directed.

Supply & fix 200 LPD Solar Hot Water Storage inner tank with insulation & MS supports including taking down old one complete all as specified and directed by Engr-in-charge

Supply & fix 100/125 LPD Solar Hot Water inner Storage tank with insulation & MS supports including taking down old one complete all as specified and directed by Engr-in-charge

M&L for cleaning including de-scaling of flate plate collector tubes and arresting leakages by using Dummy gaskets/Hole gas kits, Threaded flange / normal flange complete for solar panel suitable of 200LPD capacity of solar water heater complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning including de-scaling of flate plate collector tubes and arresting leakages by using Dummy gaskets/Hole gas kits, Threaded flange / normal flange complete for solar panel suitable of 100/125LPD capacity of solar water heater complete all as specified and directed by Engineer-in-Charge.

M&L for Pressurised hose pipe including O'rings suitable for 200LPD capacity of solar water heater complete all as specified and directed by Engineer-in-Charge.

M&L for Pressurised hose pipe including O'rings suitable for 100/125LPD capacity of solar water heater complete all as specified and directed by Engineer-in-Charge.

Supply and Fix Electric heating element 3KW threaded/cup type to SS tank of solar water heating system 200 ltrs capacity with necessary fixtures including taking out unserviceable one complete all as specified and directed by Engr-in-Charge.

Supply and Fix Electric heating element 2KW threaded/cup type to SS tank of solar water heating system 125/100 ltrs capacity with necessary fixtures including taking out unserviceable one complete all as specified and directed by Engr-in-Charge.

S&F Thermostat of temperature range 0-80 degree C suitable for Solar water heating system of any capacity with necessary fixtures including taking out unserviceability one complete all as specified and directed by Engr-in-Charge.

Supply and fix solar flat plate collector panels suitable for of 125/100 liters capacity with MS Supports stands including taking down complete all as specified.

Supply and fixing GI 25mm dia for hot & cold water supply incl fittings including taking down of old GI pipe of any description complete all as specified and directed by Engineer-in-Charge.

Supply and fixing GI gate valve with iron wheel head, screwed both ends for following sizes of pipes :-

(a) 25 mm dia

(b) 20 mm dia

Supply and fix Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down old one complete all as specified and directed by Engineer-in-Charge.

M&L for trimming of tree branches by manual labour for clearing the shades over the solar panels complete including shifting of cut pieces trimmed branches to a distance not less than 50mtr but up to a 100mtr from distance the point of operation complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 6 Sqmm PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade up to 1100 Volts as per IS: 694:1990 complete all as specified and directed by Engineer-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60cmx60cm.x6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point, 20 mm bore medium grade GI watering pipe, 15mm bore light grade GI protection pipe, PCC chamber with RCC cover, funnel with wire mesh etc including necessary test on completion all as specified and as directed.

S&F in repairs of MCB SPN 6 to 32A,B-Series, 10KA rupturing capacity complete all as specified and as directed.

REPAIR TO DESERT COOLER

Labour for day to day maintenance and servicing for desert cooler for GE Kaluchak (excluding sundays and holidays) with skilled refrigerator mechanic and helper including detecting fault of desert cooler complain and servicing all unserviceable parts for desert cooler and replacement of unserviceable parts & repair of all necessary items and handed over to user for serviceable condition , all as specified and directed by Engineer-in-Charge. Note: (a) Contractor has to employee skilled refrigerator mechanic with helper and necessary T&P for attending day to day complaints of ref and AC failing which recovery shall be made at two times of quoted rate. (b) Rate quoted shall be inclusive of transport to work shop & back shifting within permises. ( c) Any parts required to be replaced shall be replaced and paid separately as "supply only " against relevant item (s) of this schedule.

Shifting of desert cooler including submain/point wiring all electrical items and drilling ,making good on surface of PCC concreting, white cement plastering and iron frame /angle all necessary items and transporting complete from one location to other location in GE kaluchak area and Kaluchak area and handing over the machine/ equipment in serviceable condition to the user including fixing to new location all as specified and directed by Engineer-in-Charge

Supply only the following items ( PROVISIONAL) to incorporate against item No 67 & 68 here-in-before.

Grass wool pads (set of three).

Switch piano single pole one way 6 amps.

Indicator lamp 6 amps.

Submersible tulu pump single phase 230 Volt.

Front grill for desert cooler.

Desert cooler fan motor with fan complete.

Supply only the following capacitors to incorporate against repairable summer appliances window / split type AC,desert cooler, water cooler: -

Running capacitor 45 MFD.

Running capacitor 50 MFD.

Running capacitor 4 MFD.

Running capacitor 6 MFD.

Running capacitor 10 /15 MFD.

Starting capacitor 100 / 120 MFD capacity

Note:- For item 60 & 71 : Labour component for inspection, dismantaling, repair and testing of equipments including T&P, vehicle convenience involved for transportation of equiptment from MES store/site to civil work shop shall be carried out by the firm without any extra cost to the department and labour component for these items is deemed to be included in item No 2.00 here-in-before.

Supply and fixing plug and socket for single phase application complete with plug and socket in sheet metal enclosure including MCB SP 20 amps complete fixed in repairs all as directed.

Supply and fixing plug top 15 amps capacity, fixed in repairs complete all as specified and as directed.

Supply and fixing plug top 5 amps capacity fixed in repairs complete all as specified and as directed.

REPAIR TO REFRIGERATORS

Supply only the following Items to incorporate against repairable summer appliances refrigerator: Note:- Labour component for inspection, dismantaling, repair and testing of equipments including T&P, vehicle convenience involved for transportation of equiptment from MES store/site to civil work shop shall be carried out by the firm without any extra cost to the department and labour component for these items is deemed to be included.

Auto defrost thermostat switch for refrigerator of capacity upto 310 Ltrs.

Open type relay for refrigerator of capacity upto 310 Ltrs.

Over load protector for refrigerator of capacity upto 310 Ltrs.

Replacement of door rubber gasket with magnetic strip for refrigerator of capacity upto 310 Ltrs.

Bulb screw type/ pin type for refrigerator of capacity upto 310 Ltrs. .

Material and labour for System fusing, welding, soldering, vaccumising and gas charging to refrigerator of following capacities: - Note:-Refrigerant gas for charging of equipment compressor shall be provided by the firm and cost thereof shall deemed to be included in the unit rate quoted against this Item.

Capacity 170 Ltrs.

Capacity 285 to 310 Ltrs.

Supply and fixing as in replacement hermetically sealed compressor unit for refrigerator: -

Capacity 170 Ltrs.

Capacity 280/310 Ltrs.

REPAIR TO DEEP FREEZERS

Supply and Fix the following items to incorporate against repairable summer appliances deep freezers here-in- before: -

Thermostat switch suitable for deep freezer of capacity up to 500 Ltrs.

Open type relay for deep freezer of capacity upto 500 Ltrs.

Over load protector for deep freezer of capacity upto 500 Ltrs.

Material and labour for system fusing, welding, soldering, vaccumising and gas charging to Deep freezer of capacity upto 500 Ltrs complete all as directed.

Supply and fixing as in replacement (hermetically) uncut sealed compressor unit for deep freezer of capacity upto 500 Ltrs.

REPAIR TO WATER COOLERS Capacity 40/80 Ltrs & 60/120 Ltrs

Supply only the following items to incorporate against repairable summer appliances water cooler Here-in- before: -

Relay box type suitable for water cooler capacity 40-80 Ltr and 60-120 Ltr.

Relay open type suitable for water cooler capacity 60-120 Ltr

Relay open type suitable for water cooler capacity 40-80 Ltr.

Over load protector suitable for water cooler capacity 40-80 Ltr and 60-120 Ltr.

Condenser fan motor single phase 230 volt complete with fan suitable for water cooler 40 to120Ltr.

Automatic thermostat switch suitable for water cooler 40/80 Ltr and 60-120 Ltr.

NOTE : For srl item No 85.01 to 85.06 : -Labour component for inspection, dismentaling, repair and testing of equipments including T& P, vehicle convenience involved for transportation of equiptment from MES store/site to civil work shop shall be carried out by the firm without any extra cost to the department and labour component for these items is deemed to be included in item No 2.00 here-in-before.

Supply and fixing as in replacement ( hermetically ) uncut sealed compressor unit for water cooler including gas charging.

Capacity 40 / 80 Ltrs.

Capacity 60 / 120 Ltrs.

Material and labour for System fusing, welding, soldering, vaccumising and gas charging to appliances water cooler of following capacity: - Note:-Refrigerant gas for charging of equiptment compressor shall be provided by the firm and cost there off shall deemed to be included in the unit rate quoated against this item.

Capacity 40 / 80 Ltr.

capacity 60/120 Ltr.

Supply and fixing as in replacement plato brass push type bib cock chromium plated fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore 15mm, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement PVC connections 15 mm size with PTMT nuts of length 600 mm and washers, complete all as specified and as directed by Engr-in-Charge.

S&F brass stop cock, chromium plated, screwed down for iron pipe or for brass ferrule for bore of pipe 15 mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge

Supply and fixing as in replacement PVC drain water hose pipe for water cooler of suitable length as directed complete with fixing clamps and elbows/ nipple etc.

Repair to rusted worn out body of water cooler comprising cutting, taking out of rusted MS Sheet from body and providing new MS Sheeet of 1.6 mm thickness including necessary cutting, bending, welding and fixing with screws including testing for leakage by filling water for 24 hours complete along with complete descaling of condenser unit with acid and making it neat and clean as all specified and as directed by Engineer-in-charge.

Supply and fix wall mounted stand for mounting of outer unit of split ac made of heavy duty GI steel of size upto 2.0 ton with angle height 450 mm and bracket length 485 mm complete all as specified and directed.

Supply and fix 5 metre transparent drain pipe for split ac and window ac leak resistant all as specified and directed.

REPAIR TO CEILING FAN/ EXHAUST FAN

Taking down carefully ceiling fans at any height of any sweep/ make /model after disconnecting electric connection and dismantling and opening the body of ceiling fan and examine for repairs including servicing,overhauling, greasing etc and cleaning the complete body both internal & external parts with cleaning agent and renewal of minor spare parts such as split pins,cater pins,coupling bolt, capacitor holder,terminal adoptor, screws, nuts, spring washers for blade/body etc and replacement of components/accessories such as ball bearings, gun metal bushes, capacitor, canopy top & bottom, shackle clip assembly and assembling of all parts, remetalling of worn out shaft of fan cutting brazing machining and polishing to make the shaft suitable for fixing of new ball bearing and fixing ball bearing in replacement of bushing system in ceiling fan and assembling the same and testing to the engineer in charge to ensure smooth and noise free operation(bearing shall be measured and paid seperately) including hanging and fixing back in existing location and connecting of electrical connections and testing for its satisfactory performance complete all as specified and directed. (Note:- (i) Spare parts will be measured and paid separately under relevant item of schedule as supply only (ii) Rewinding of fan motor,painting will be measured and paid separetly under relevant item of schedule. (iii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate. (iv) All repair works will be carried out at ON site/ workshop E/M yard as directed by EIC. (v)Repair works of fans should completed and refixed the same within 12 hours after receipt of complaint slip.If the complaint not attended /not completed on same day recovery will be done from RAR bill as follows: a) For first day Rs 200 b) For second day Rs 300 c) For next every day Rs 500

All as per serial item No.97 here-in-before but for exhaust fan of size 300mm/450mm sweep

Material and labour for taking out and removing burnt copper winding, cleaning the armature, rewinding the ceiling fan (1200/1400mm sweep) armature/motor with new super enamelled copper wire of existing gauge including supply and fixing necessary E class insulating materials etc and varnishing with approved grade of insulation varnish and heating up and testing all as specified and as directed.

M&L for rewinding of heavy duty exhaust fan motor of 300 mm sweep of any make/model/type with new supper enamelled copper winding wire of similar gauge and number of turns and assembling of fan motor and rotor and testing including removing burnt out copper winding wire from fan motor complete all as specified and directed.

All as per Item No.93 above but 450mm.

Supply only gun metal bush suitable for ceiling fan/Exhaust fan/Air circulator fan /wall mounted fan of any sweep/type of any size (Make - TATA/MSP).

Supply only Ball bearing No.6201/6202/6203/6204 for ceiling fan (Make - TATA/SKF /NBC/NRB).

Supply only fan condensor 2.5 mfd,230 volt,AC 50Hz confirming to IS 1709 for ceiling fan,exhaust fan,wall mounted fan and pedestal fan (Make - USHA/UNIVERSAL/Havells)

Supply only fan condensor 3.15 mfd (Make - USHA/UNIVERSAL/Havells)

Supply & fixing Electronic fan regulator stepped type with five step ,two module, 100Watt 240 volts complete all as directed.

Supply only flexible multi stranded copper wire three core of size 0.75 sqmm all as specified and as directed.(Make:Havells/Plaza/Polycab)

Supply only PVC connector 4 way 6Amp with connection screws nuts etc complete all as directed.

Supply only PVC canopy set of two pieces for ceiling fans of any size complete all as directed.

Supply only rubber reel with nuts bolts clamp and washers of suitable size for ceiling fan complete all as specified and as directed.

Supply only down rod made of MS pipe medium grade 15mm bore of 900mm long including drilling hole both ends & making slot in one end for fixing of ceiling fan of any sweep/type including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

REPAIR TO GEYSER

Comprehensive repair/maintenance of storage type electric water heater (Geyser ) vertical or horizontal type of capacity 35 Ltrs comprising of the following :-

(a) Inspection, taking down , opening or dismantling, de-scaling,brushing and thoroughly cleaning the storage tank up to the satisfaction of the Engineer-in-charge.

(b) checking of all stop cock, pressure release valves, fusible plugs for its serviceability etc. in situ to ensure free movement of the parts including supply and replacing the washers/gasket nut etc.

(c) Checking and rectify earth continuity of the Electrical circuits of the Geysers and power point.

(d)Checking,and re-fixing thermostat and re-adjust.

(e) De-scaling the immersion type heating element and siphon assembly with diluted Hydro chloric acid or clear pedette solution.

(f)Checking of indicator lamp for it serviceability .

(g)Re-assembling the Geyser, re-install and testing complete.

(h) The rate for above ietm are deemed to include for transportation of geyser to the work shop as approved by Engr-in-Charge for necessary repairs and testing of Geyser at workshop.

(j) All repair works will be carried out at ON site/ workshop E/M yard as directed by EIC..

(k)Repair works of geysers should completed and refixed the same within 12 hours after receipt of complaint slip.If the complaint not attended /not completed on same day recovery will be done from RAR bill as follows: a) For first day Rs 200 b) For second day Rs 300 c) For next every day Rs 500

Note : Parts / components of geysers found unserviceable shall be replaced by the contractor. New parts/components required shall be measured and paid separately under item here-in-after as supply only and labour charges required for replacement are deemed to be included in the quoted rate of item no. 19

All as per item No.113 to 123 here-in-above but Geysers of capacity 25 ltrs .

Supply only thermostat(Adjustable type) of Rod/stem Type EST-11EM,20A resistive , 250 Volt, opening on temperature rise of approved make and having ISI mark all as specified.

Supply only steel inner tank suitable for storage type water heater (geyser) 25 litre capacity.

Supply only steel inner tank suitable for storage type water heater (geyser) 35 litre capacity.

Supply only steel siphon geyser assembly 6/9 hole suitable for 35 ltr capacity geysers any make as required at site of approved make complete with inlet and outlet and provision for thermostat pipe with drain pipes with drain plug, screws, studs, clamps for fixing heating elements etc. including gasket all as specified and as directed

All as per item No.110 here-in-above but siphon assembly suitable for 25 ltrs capaity Geysers.

Supply only heating elements of capacity 1.5 KW AC 240 volts suitable for storage type electric water heater as per site requirement (press type /screw type/triangular/circular base or ceramic cartige type),ISI marked all as specified and as directed.

All as per item No.112 here-in-above but of capacity 2 KW AC 240 volts

Supply only glass wool for geyser 25/35 litres capacity all as directed.

Supply only gasket of thickness 5mm for geyser assembly of 09 holes/09 holes complete all as specified and as directed.

Supply only geyser indicator pilot lamps(red and green lamps) with wiring round/square/rectangle suitable for geysers of any type.

Supply & fixing PVC connection pipe 15 mm dia, 450mm long with end nuts and washer, suitable for cold/hot water outlet of geyser complete all as specified and directed.

Supply & fixing PVC connection pipe 15 mm dia, 600mm long with end nuts and washer, suitable for cold/hot water outlet of geyser complete all as specified and directed.

Supply only safety valve suitable for 25 Ltr/35 Ltr geyser all as specified and as directed.

Supply only non return valve 15mm bore as in replacement of old one and connection and testing complete all as specified and as directed.

Supply only plug top 3 pin 16 Amps,240 volts.

Supply only flexible multi stranded copper wire three core of size 2.5 sqmm all as specified and as directed.(Make:Havells/Finolex/Polycab)

Supply only fastner mild steel 100/150/200mm long complete all as directed.

Supply and fix in repair Single pole and neutral enclosure(1P+N+E ) with a two pin and earth plug and socket complete with one double pole 20A MCB all as directed.Make Schneider cat No A9HMS220

Supply and fix in repairs Switch socket combination universal type, 3 pin 16 Amp, flush type, 240 volts, ISI marked complete all as specified and as directed at site by the Engrs-in-Charge.Make: Anchor

REPAIR TO SPLIT AC AND WINDOW AC

Supply of Labour only for attending and rectification of daily complaints for day to day maintenance and servicing for split AC/ window AC / watercooler / refrigerator / deep freezer/ hot & cold air conditioner/ dual inverter air conditioners of any capacity and make installed in various locations of GE KALUCHAK (excluding sundays and holidays) with skilled refrigerator mechanic and helper including detecting fault of split/window air conditioner complain and servicing all unserviceable parts for split/window ac and water cooler, deep freezer, refrigerator and replacement of unserviceable parts & repair of all necessary items and handed over to user for serviceable condition within 24 hours for minor faults and within 48 hours for major faults all as specified and directed by Engineer-in-Charge. Note: (a) Contractor has to employ skilled refrigerator mechanic with helper and necessary T&P for attending day to day complaints of Ref and AC failing which recovery shall be made at two times of quoted rate. (b) Rate quoted shall be inclusive of transport to work shop & back shifting within permises. ( c) Any parts shall be replaced and paid separately as "supply only " against relevant item (s) of this schedule.

M&L for shifting of split type AC/ window type AC capacity upto 2 ton including submain/point wiring all electrical items and drilling, making good on surface of PCC concreting, white cement plastering and all necessary items and transporting complete one location to other location GE Kaluchak area replacing unserviceable parts and handing over the machine/ equipment in serviceable condition to the user including fixing to new location all as specified and directed by Engineer-in-Charge.

Supply only the following items to incorporate against repairable summer appliances window / split type AC against relevant items No 126 and 127 here-in- before.

Blower motor complete suitable for window type AC upto 2.0 ton all as specified and directed by Engr-in-Charge.

Indicator suitable for window type AC up to 2 ton.

Thermostat switch suitable for window type AC up to 2 ton.

Relay along with box suitable for window type AC upto 2 ton.

Plastic air filter suitable for window AC upto 2 TR.

Outer unit condenser fan motor suitable for window type AC up to 2 ton.

Fan for outer unit condenser motor suitable for window type AC up to 2 ton.

Front grill as per existing suitable for window type AC upto 2 ton.

Plastic air filter suitable for split AC indoor unit AC upto 2 TR.

Wiring kit suitable for split AC and window type AC upto 2 ton.

Condenser fan motor complete with fan suitable for out door unit of split type air conditioner upto 2 ton.

Fan for condenser motor suitable for split type air conditioner out door unit.

Relay suitable for split type AC upto 2 ton.

Cooling coil evaporator fan motor complete suitable for indoor unit of split type air conditioner upto 2 ton.

Blower for indoor unit of Split AC upto 2 ton .

Foaming insulator for AC suction/ cooling line,7/8" (Approx - length 5.9 ft).

S&F of condenser outdoor unit capacity 2TR/1.5TR of split AC and also removing old unserviceable condenser complete all as specified and directed by Engineer-in-Charge.

Supply and fixing as in replacement ( hermetically ) sealed compressor unit for window type air conditioner for the following capacity including gas charging: -

Capacity 2 TR.

Capacity 1.5 TR.

Suppy and fixing suction and dischagre valve suitable for split type air conditioner out door unit complete all as specified and directed.

Supply and fixing as in replacement ( hermetically ) uncut sealed compressor unit for split type air conditioner for the following capacity including gas charging: -

Capacity 2 TR.

Capacity 1.5 TR.

Material and labour for system fusing, welding, soldering, vaccumising and gas charging to split type air conditioners for the following capacity: - Note-Gas charging at one location will be counted and paid as one job inspite of charging it number of times at same location. (ii) Necessary T & P for gas charging of appliances for mechanic shall be arranged by the contractor at his end without any extra cost to the department.

Capacity 2 TR.

Capacity 1.5 TR.

Material and labour for system fusing, welding, soldering, vaccumising and gas charging to window type air conditioners for the following capacity: - Note-(i)Gas charging at one location will be counted and paid as one job inspite of charging it number of times at same location. (ii)Necessary T & P for gas charging of appliances for mechanic shall be arranged by the contractor at his end without any extra cost to the department.

Capacity 2 TR.

Capacity 1.5 TR.

Repair to power control board (PCB) of inverter type/hot and cold split type AC/window AC for the following capacity: -

Capacity 2 TR.

Capacity 1.5 TR.

Supply and fixing as in replacement ply board 6 mm thick, grade BWR, type BB, fixed with nails to timber frame work as in cover for window where desert cooler / window type AC/split type AC are installed complete all as specified and as directed.

S&F by flushing to walls MCB distribution board double door 240 volts 2 way making good to disturbed surfaces of floors walls including taking down the old DBs etc complete all as specified and directed.

S&F MCB SPN upto 32 amps, 240 volts complete including taking down old unserviceable complete all as specified and directed.

M&L for industrial type metal socket enclosure with 240 volt MCB 20 amps, with metal plug top complete all as specified including taking down old unserviceable one.

Supply&Fixing PVC insulated sheathed service wire twin core 10 sqmm aluminium solid conductor 1100 volts grade including taking down old unserviceable one complete all as specified and directed.

S&F copper pipe 5/8" and removing old unserviceable copper pipe complete all as specified and directed by Engineer-in-Charge.

S&F copper pipe 1/4" and removing old unserviceable copper pipe complete all as specified and directed by Engineer-in-Charge.

REPAIR TO VOLTAGE STABILIZER

M&L for day to day maintenance and servicing for voltage stabilizer for GE Kaluchak with skilled refrigerator mechanic and helper including detecting fault of voltage stabilizer complain and servicing all unserviceable parts for voltage stabilizer and replacement of unserviceable parts & repair of all necessary items and handed over to user for serviceable condition, all as specified and direted by Engineer-in-Charge Note: (a) Contractor has to employee skilled refrigeration mechanic with helpers and necessary T&P for attending day to day complaints of Ref and AC failing which recovery shall be made at two times of quoted rate. (b) Rate quated shall be inclusive of transport to work shop & back shifting within permises. ( c) Any parts required to be replaced shall be replaced and paid separately as "supply only " against relevant item (s) of this schedule.

Supply only the following items ( PROVISIONAL) to incorporate against item No 142 here-in-before.

Trigger transformer (Control step down transformer) 12-0-12 volts for 03 KVA to 06 KVA.

Power relay 24 volts / 250 ohms 30 amps ( 03- Nos) for 03 KVA to 06 KVA.

Bakelite terminal strip 4 way up to 40 amps for 03 KVA to 06 KVA.

IC control cord for timer suitable for 03 KVA to 06 KVA.

Rewinding transformer of voltage stabalizer of capacity 03 KVA with existing guage copper winding of capacity range 90 to 280 Volts complete all as specified and as directed.

Rewinding transformer of voltage stabalizer of capacity 05 KVA with existing guage copper winding of capacity range 90 to 280 Volts complete all as specified and as directed.

Supply and fixing rolled mild steel joist, channel, angle or tee sections ( Gde Fe 290 ) as in framing for stand for voltage stabilizer/ window AC/desert cooler or for any other purpose with riveted bolted or welded attachment etc and inclusive of one primer coat , one under coat and one finishing coat of synthetic enamel paint, including taking down of old broken steel complete all as specified and as directed.

Pyramid constructions (BID ID -3434685)