SPECIAL REPAIR TO CERTAIN BUILDINGS P 39 MTR and S STATION WORKSHOP AT AF STN AMLA

Amount

B/R PORTION

Taking down cement or cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.and disposing of the rubbish material in low lying areas of Defence land complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and directed.

Material and labour for rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material and labour for rendering 10 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 3mm thick putty finish on wall surfaces with wall care putty all as specified and directed

Material and labour for rendering 5 mm thick in CM 1:3 on ceiling, RCC facia and Chajjas, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer all as specified and directed

Material and labour for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer all as specified and directed

Material and labour for preparing new plastered surfaces of ceiling and applying three coats of white wash all as specified and directed

Taking down carefully existing bitumen tar felt including plaster concrete/brick coba/tiling from the roof/parapets to depth upto RCC slab, and roughening the surface, wire brushing, cleaning and washing with water etc, removing the rubbish to a distance & depositing where directed .

Material and labour for rendering over roof slab 15 mm thick in CM 1:4 on concrete surfaces including and mixed with water proofing liquid @ 200ml per bag of cement complete all as specified and as directed.

Supply only liquid water proofing chemical as specified and directed.

Material and labour for cleaning the new screed bed surfaces thoroughly with wire brushes and providing water proofing treatment all as specified here in after : (a) Bituminous primer @ 0.30 liter per sqm conforming to IS 3384-1986 (b) Applying evenly one tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces. (c) Polymeric water proofing membrane, 3 mm thick reinforce with polyster non wooven fabric weight 3.0 Kg per square metre laid over roof surface with 100 mm over lap traverse direction and 75 mm at longitudinal direction and including vertical surface upto required height and tucking into grooves and sealing complete with thermofusion laid by torch application method all as specified in application manual of the company. (d) Applying bituminous based aluminum paint at 0.2 kg per square metre in two coats over membrane. Make : M/S TEXSA Ltd or M/S STP Ltd or M/S TIKI ASPHALT HYDROSTOP

Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and as directed

Supply and fix Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings and hanging, also fastening and fixing conforming to Fe-290, Gde-E-165 complete all as specified and directed.

Supply and fix mild steel, plain, black sheet 1.6mm thick but in hearths, covering to door shutter, covering to door chokats (frames), chullah hoods, water tanks, water thoughts, ducts, urinal thoughts and funnels etc, cut to size edge bedded if directed , holes punched, including round headed screws, clout nails or riverts and fixed to wood or steel members etc with plain 40mm lap joints or welded/riverted seams including bending,ends, outlets etc complete all as specified and directed.

Supply and fix mild steel flat iron, round or sqaure bars in available lengths complete all as specified and directed.

Material and labour for preparing new surfaces of steel of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed

Supply and fix, MS rolled framed work such as grills, gratings, etc, with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters walk ways, railings, framework of water tanks and similar work conforming to Fe 290. Gde-E- 165 all as specified and directed.

Supply and fixing steel windows with side hung shutters including box type hinges, with steel handles, steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and fixing steel windows with side hung shutters including box type hinges, with steel handles, steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and fixing steel ventilators with top hung shutters including hinges, with steel peg stay complete complete all as specified and as directed.

Supply and fix, sheet glass 3mm thick, ordinary quality not exceeding 0.5 sqm in each pane and in square and glazing with oil putty all as specified and as directed.

Supply and fix, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

Material and labour for cutting holes in brick walls built in cement mortor for inserting hold fast and making good dismanled portion in cement concrete 1:2:4 type B-1, depth exceeding half brick but e.exc one brick complete all as specified and directed.

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Material and labour for joint free Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Material and labour for Non Skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Material and labour for Non Skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces, set and jointed in neat cement slurry & painted in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in CM 1:4 omplete all as specified and directed.

Material and labour for digital glazed coloured ceramic tiles of size 350mm x 250mm/450mm x 300mm, 7mm thick, laid on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile over and including 10mm thick rendering or backing coat in CM 1:4 complete all as specified and directed .

Material and labour for machine cut kota stone slab, 20-25mm thick, laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed

Supply and fixed in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including provision of Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and directed. Make : CERA/Parryware/Hindustan Sanitary Ware

Supply and fix, PVC (SWR) S trap 110mm bore of pipe, including connecting to outlet with solvent cement all as specified and directed.

Supply and fixed in repairs, 75mm dia PVC nahani trap, with grating including jointing waste pipe fixed in cement concrete type B-1 (1:2:4) with solvent cement complete all as specified and as directed.

Supply and fixed in repairs 10 litres capacity PVC valveless low level flushing cistern, syphonic action type with inlet, ball valve, float and handle fixed to wall with brackets and screwed including PVC flush pipe and connecting to WC complete all as specified and directed. Make : CERA/Parryware/Hindustan Sanitary Ware

Supply and fixed in repairs PVC connection 15 mm size of length 450 mm with PTMT nuts all as specified and all as directed.

Supply and fixed in repairs, vitreous china wash hand basin, white, flat back, size 550 X 400 mm, excluding taps, chain and plug and porcelain stopper but including CI brackets and 32mm CP waste fittings and PVC waste pipe of 32mm dia including pillar tap 15mm bore dia of pipe cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixed in repairs tubular towel rail, 20mm dia, 'D' type, brass, chromium plated, 600mm long between flanges and fixed, complete all as specified and directed.

Supply and fixed in repairs, 15mm bib taps chromium plated cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed all as specified and directed

Supply and fixed in repairs, 15mm dia stop valves, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed all as specified and directed

Supply and fixed in repairs hand shower (Health faucet) stainless steel with 1.50 meter long flexible tube & wall hook of same finish, suitable for 15mm bore dia of pipe, screwed down for iron pipe or for brass ferrule complete all as specified and directed

Taking up or down steel tubing 15mm dia and connections, complete all as specified and directed.

Supply and fixing GI tubing,15mm dia 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 type B-1 using 40mm graded stone aggregate as in plinth protection, laid in bays, bay area not exceeding 2sqm each, finishing the surface even and smooth without using extra cement including necessary formwork and filling the joints with mastic filling comprising 1 part of heated bitumen and 3 parts of sand (all by weight) complete all as specified and directed.

Material and labour for 150mm thick Cement concrete 1:2:4, type B2 using 40mm graded stone aggregate as in floor, finished even and smooth without using extra cement complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards /slabs /blankets, any thickness including cover fillets complete all as specified and as directed.

Supply and fix, Aluminium anodised snap grid false ceiling using standard aluminium sections of size 38mmx25mmx2.4mm weighing 0.36 Kg/Rm as in wall angle, 36.5mmx25mmx1.4mm weighing 0.24 Kg/Rm as in Main/Cross Tees and grid of size 605 x 605mm suspended with 4mm dia. GI wire at an intervals of n.exc. 600mm centre to centre and fixed to roof slab by means of ceiling ceats made out of GI flat 40mmx3mm and fasteners 12.5mm dia and 60mm long complete all as specified and directed

Material and labour for 6mm thick non asbetos fibre cement building baord fixed in cement ceiling flat or sloping to GI/aluminium frame work complete all as specified and directed.

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings all as specified and directed.

Material and labour for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved by GE, having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws all as specified and directed.

Material and labour for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour as approved by GE, having tensile strength of 550Mpa as in ridge/cladding to wall, fixed with self tapping screws all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

Material and labour for walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in cement mortor 1:6 complete all as specified and directed.

Material and labour for walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in cement mortor 1:6 complete all as specified and directed. Note : Old serviceable stone obtained from demolition shall be used

Material and labour for raised poinnting to random rubble masonary built in CM 1:4 including racking out joints in existing stone masonanry complete all as specified and directed.

Dismantling unserviceable water tank of capacity 500 ltr nexc 1000 ltrs. Complete all as specified and as directed.

Supply and fix, 1000 litres capacity rotational moulded polyethylene water storage tank, triple layered (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed .

Material and labour for preparing old painted surfaces of wooden of any description not otherwise described 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Material and labour for preparing new surfaces of steel of any description not otherwise described 10cm width or girth and applying two coats of synthetic enamel paint complte all as specified and directed.

Material and labour for complete removal of existing treatment of old external decorative surface of walls and applying two coats of cement base paint over a coat of cement primer including crack filling with exterior wall care putty complte all as specified and directed.

Material and labour for preparing of old decorative surface of walls and applying one coat of white wash on ceiling including cornics etc complete with crack filling with wall care putty complte all as specified and directed.

Material and labour for preparing of old decorative surface of walls and applying two coats of oil emulsion distemper over a coat of primer complete complte all as specified and directed.

Demolition of reinforced cement concrete of any description & any position and disposing off the rubbish materials in low laying areas of defence land complete all as specified and directed.

Material and labour for reinforced cement concrete 1:2:4, type B1 (nominal mix) using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like all as specified and directed. Note : Reinforcement and form work will be measured and paid separatety.

Use and removal of steel shutters as in form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), fair finished surfaces complete all as specified and directed.

Material and labour for mild steel TMT bars, 10 mm dia and over cut length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia complete all as as specified and directed.

Material and labour for mild steel TMT bars, 5mm dia and over up to including 10 mm dia in stirrups cut length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia complete all as as specified and directed.

E/M PORTION

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc and makiing good distrubed surface of wall/ floor etc complete all as specified and directed.

Material and labour for point wiring with FRLS PVC insulated unsheathed 1100 volts grade, conforming to IS-694, 1.5 Sq mm (nominal area) multi stranded copper conductor cable down though in and including non metallic medium grade rigid PVC conduit 20mm dia heavy grade, ISI marked, including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes, switch plates of suitable make and FRLS PVC 1.5 Sq mm copper earth continuity wire connected to earth dolly complete for the following all as specified and as directed. .

One light point controlled by one, one way switch

One Fan point controlled by one, one way switch

One 3 pin 5 Amps Socket outletpoint controlled by one, one way switch on same board.

One 3 pin 5 Amps Socket outletpoint controlled by one, one way switch on independent board.

All as per item No 72 above but for point wiring with 2.5 sqmm two single core copper cable and earth continuity wire with 2.5 sqm single core cable for one three pin 15 Amp socket outlet point on independent board complete all as specified and directed.

Material and labour for sub main wiring with single core 4 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit medium grade and fittings including 4 sq mm FRLS PVC insulated unsheathed stranded copper earth cable concealed in wall and connected to common earth dolly complete and including cutting, chasing by using machine and making good the disturbed surface complete all as specified and directed Note: 2 runs of 4 sq mm cable and 1 run of 2.5 sq mm and one run of heavy duly PVC conduit shall be measured as one unit.

Supply and fix modular switch, 6 Amps, one way, 1 module all as specified and directed.

Supply and fix modular switch, 16 Amps, one way, 1 module all as specified and directed.

Supply and fix modular socket outlet, 6 Amps, 2/3pin combined, 2 module complete all as specified and directed.

Supply and fix modular socket outlet, 6 Amp/16 amps, 2/3pin combined, two I one, 2 module complete all as specified and directed.

Supply and fix modular fan regulator, electronic step type 120 Watt, 2 module complete all as specified and directed.

Supply and fix ceiling rose, surface type, PVC/ Polycarbonate insulated body of size 50 x 28 mm two to three terminals all as specified and directed.

Supply and fix lamp holder, PVC/ Polycorbonate type with back plate suitable for batten fitting complete all as specified and directed.

Supply and fix highly efficient LED retrofit Lamp 09 W used as a ready replacement for existing GLS/CFL complete all as specified and directed. Make : Havells, Cat No. LED Adore 9 W E27 CDL or equivatent model in Crompton/ Bajaj.

Supply and fix wall mounted LED 08 W/10W CRCA fitting 230V with extruded aluminium heat sink provided for efficiient heat dissipation and integral LED rod, electronics driver and connector block etc complete with all accessories internally prewired including necessary mounting arrangement , provision of new 2 core multistranded copper conductor of size 0.5 sqmm from ceiling rose to fitting including necessary LED polycarbonate tube 2 FT 8 W complete all as specified and directed. Make : Crompton, Cat No. LCTLN-10-CDL or equivatent model in Havells/ Bajaj.

Supply and fix for suspended type 4FT 36/40W LED fitting linear in sleek design 230 V with integral electronic driver connector bloc etc complete with all accessories internally prewired including necessary mounting arrangement, provision of of 2 core 0.5mm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Make : Crompton, Cat No. LCLP54-36-CDL or equivatent model in Havells/ Bajaj.

Supply and fix for wall mounted LED 18 W/20W CRCA fitting 230V with extruded aluminium heat sink provided for efficiient heat dissipation and integral LED rod, electronics driver and connector block etc complete with all accessories internally prewired including necessary mounting arrangement , provision of 2 core multistranded copper conductor of size 0.5 sqmm from ceiling rose to fitting including necessary LED polycarbonate tube 4 FT 18/20 Wcomplete all as specified and directed. Make : Havells, Cat No. LED Adore 20 W E27 WW or equivatent model in Crompton/ Bajaj.

Supply and fix MCB DB VTPN 4 way double door sheet metal enclosures comprising of OEM/manufacturer specified bus bar 415 volts, 50 Hz bus bar and neutral link suitable for MCCB incomer & MCBs outgoing complete all as directed. Make : Legrand Cat No 507670 or equivalent model in L & T/Seimens.

Supply & Fix MCB TPN, 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002, integrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and as directed. Make : Legrand Cat No. 408683 or equivalent model in L & T/ Seimens.

Supply and fix MCB DB SPN 12 Way double door sheet metal enclosures with OEM specified common bus bar and neutral link complete to fixture complete all as directed. Make : Legrand Cat No 507612 or equivalent model in L&T /Siemens

Supply and fix MCB DB SPN 8 Way double door sheet metal enclosures with OEM specified common bus bar and neutral link complete to fixture complete all as directed. Make : Legrand Cat No 507611 or equivalent model in L&T /Siemens

Supply and fix MCB DB SPN 4 Way double door sheet metal enclosures with OEM specified common bus bar and neutral link complete to fixture complete all as directed. Make : Legrand Cat No 507610 or equivalent model in L&T /Siemens

Supply and fix MCB SPN 240 Volts 32/40 Amp 'C' curve complete all as directed. Make : Legrand Cat No 408617 or equivalent model in L&T /Siemens

Supply and fix 'C' curve MCB SP 240 Volts 6 to 30 Amp complete all as directed. Make : Legrand Cat No 408587 or equivalent model in L&T /Siemens

Taking down Exhaust fans of any size and/sweep after disconnecting the wire from existing ceiling rose and refixing the same after cleaning dust, oiling, greasing including providing flexible cable from ceiling rose to connector of fan complete all as directed.

Taking down Ceiling fans of any size and/sweep after disconnecting the wire from existing ceiling rose and refixing the same after cleaning dust, oiling, greasing including providing flexible cable from ceiling rose to connector of fan complete all as directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cables and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each in soils, complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed.

Material and labour for sand filling with dry river sand, cushioning below/above and around cable in trenches all as specified and directed. Note : Punned thickness only shall be measured.

Supply and laying Un-reinforced precast concrete cable covers, class LV, type 1, falt of size 250mm x 150mm x 40mm thick complete all as specified and as directed.

Supply, lay, joint, test and commissioning LT UG XLPE insulated armoured multistranded heavy duty electric cable with aluminium conductor, 1100 volts grade is 7098-I marked laid in trenches, under the road, drain, path, culvert or passing through pipes, fixed to pole and jointing & testing including necessary glands, lugs etc.,of size 10 sqmm, 2 core all as specified and as directed.

Supply and fix GI pipe bracket bent to shape drilled/welded made out of 32mm dia bore light grade GI pipe 0.9 meter long for fixing of building security light fitting of any type and description including suitable size of MS clamps, nuts, bolts & washers including two coat of Aluminium paint over one coat of red oxide primer all as specified and as directed.

Supply and fix in repair Energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP66 protection and Impact resistance of IK 07 etc complete with all accessories internally prewired including necessay mounting arrangement , provision of 2 core 1 Sqmm multidtranded copper conductor from ceiling rose to fitting complete all as specified and as directed. Make : Havells, Cat No. ENDURACITYLITEPLAT PLUSSL30WLED757SASYBOPC or equivatent model in Crompton/ Bajaj.

Material and labour for Earthing complete with galavanized steel earth electrode, 600 x 600 x 6.00 mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to GI wire of 4 mm dia through GI pipe 15 mm dia light grade by means of bolts, nuts, check nuts and washers of galvanised iron or steel with adequate quantity of charcoal and salt, proper watering arrangements including 20 mm dia medium grade GI tubing all as shown in electrical plate No.5 connected to earthing test point all as specified or indicated including testing on completion including necessary earth work and excavation in any type of soil, PCC pit 1:3:6, type C1 using 20mm graded stone aggregate, 40 mm thick precast RCC cover 1:2:4, type B-1 using 20mm graded stone aggregate reinforced with 8 mm dia TMT bar @ 75 c/c both ways with 02 Nos lifting handles of 12 mm dia MS plain bar, with funnels & wire mesh complete all as specified and directed. Note: GI earth lead & protection pipe upto 7.5metres long shall be deemed included in the rate quoted.

Note : The amount against Schedule of Credit on Page No. 47 shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.

Vee kay construction

M/S J J ENTERPRISES

M/s Prayag Construction