Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹17.4 LAccepted-AOC COLABA MUMBAI | 1st | Accepted-AOC Th M/s Monarch Enterprises is being L1 accepted pl. | |
| 2 | 2nd₹23.1 L+₹5.7 L (32.6%)Rejected-Finance COLABA MUMBAI | YAVATMAL | MAHARASHTRA | 445001 | 2nd | Rejected-Finance Not being L1 | |
| 3 | Rejected-Technical 15 401 PREM JOT COMPLEX ANIKET CO OP HSG SOC LTD NEAR INDIAN OIL NAGAR GHATKOPAR MANKHURD LINK ROAD GOVANDI CHEMBUR W MUMBAI 400043 | MUMBAI | MUMBAI | MAHARASHTRA | 400043 | - | Rejected-Technical Lift licence not uploaded |
| Sl No | Description | Qty | Unit | Escon Elevators Pvt Ltd L2 | Monarch Enterprises L1 |
|---|---|---|---|---|---|
| 1.00 | Dismantling carefully and taking down of old BER Goods lift from the existing lift well of 500 kg complete with all accessories, control panels etc and deposit the same to AGE E/M store yard/ inside old AC plant room or as directed and making good the disturbed surface of wall/floor etc with necessary civil works for installation of new lifts all as directed by Engr-in-charge. | 1 | Each Job | 40,000 ₹40,000 | 25,000 ₹25,000 Lowest |
| 2.00 | Design supply, install, testing and commissioning of Goods cum Passenger Lift in the existing lift well, speed 1 metre/sec, with automatic micro stroke button control, microprocessor based controller, simplex selective/ collective control suitable for 3 phase, 415 volts, 50 Hz, AC supply, independent operation, lift with single speed motor of 415 volts conforming to IS- 14665, suitable to serve G + 3 upper floors i.e. 4 stops and 4 landings with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, infra red sensor in full height of door & built in announcing system without hand set (01 Nos, one each in car, Machine room & near Ground floor landing door), including necessary civil works for fixing new system in existing well and provision for wooden door shutter for landing doors for safety of the users till installation of new lift complete all as specified and as directed. | 1 | Each Job | 19,00,000 ₹19,00,000 | 15,09,000 ₹15,09,000 Lowest |
| 2.10Make & Type : Traction Gearless with Machine room Type of lift : Goods cum Passangers lift Load capacity : 544KG/08 Passenger including operator Speed : 1.0 Meter per second Power Supply : 415 Volts, 3 Phase AC, 50 Hz Type of drive : AC variable voltage & variable frequency (VVVF) Type of machine : Gearless permanent magnet synchronous motor ( including suitable capacity of electrical cabling FRLS with PVC conduits of suitable size and control & MCB/ MCCB). Car size : 1300 mm wide X 1100 mm depth x 2200 mm height (or as per existing size) OR (AS PER IS not less than 1.43 sq.m area) Shaft size : 1800 mm wide x 1600 mm depth (or as per existing size) OR (AS PER OEM) Car and landing doors : centre opening , sliding type, stainless steel hair line finish for car and landing at all floor. | |||||
| 2.20Flooring : Aluminium chequered sheet flooring 5 mm thick(Standard pattern) as per existing cabin size Or (As per OEM) Signal System : (a) Combined luminous hall push button with (LED) TFT hall position indicators with stainless steel hairline face plate at all floors. (b) LED Car position indicator in car and over load warning in the car. (c) One No. car operating panel with stainless steel hairline with etched borders and luminious button in car. (d) Car direction indicator in car and landing. (e) Battery operated Alarm bell and Emergency light along with inverter of suitable capacity having power back up for a period of minimum 1/2 hour( 30 minutes). (f) Fireman switch at ground floor. (g) All signal fixture & COP will have stainless steel face plate. (h) Infra red sensor sorting edge of edge of door for entire height. (j) Bult in announcing system without hand set. Car indicator : Shall be proivided with audio announcing system with music. Stop and Opening : 04 Stops and 04 Openings all on the same side. Car Enclosures : Standard manufacturing with MS Sheet Platform & Stainless steel, hairline finish paneling of 1.5 mm thick, with light fitting LED type ceiling light of 09 watts, Cabin Fan 300mm sweep with auto start function ( incl wiring with suitable stranded copper conductor cable FRLS), stainless steel false ceiling of 1.2 mm thick, mirror finish, stainless steel hand rail, mirror etc. Terminal buffers : Special spring buffers as per manufacturer's design. Door opening : 800 mm wide x 2000 mm height clear opening (or as per existing size) (or as per OEM only) | |||||
| 2.30Emergency services : (a) Automatic Rescue Devices (ARD), to be operating with maintenace free batteries to bring the car to the nearest floor level and auto opening for evacuation of passengers in the event of power failure. (b) Overload Relays, Contactor and Fuses, Electrical terminals of high quality, Limit switch with accessories on each floor, Gravity Counter weight as well as over hoisting/ over lowering limit switches for top most position and Phase sequence corrector, (c) Fire emergency operation. (d) Emergency operation for power failure. (e) Earthquathquake emergency operation. System backup function : (a) Hall call malfunction recovery system. (b) Individual signal malfunction recovery system. (c) Group management control system, malfunction recovery system, (d) Individual control malfunction recovery system Service function : (a) Mischievous call cancellation. (b) Automatic door time adjustment. (c) Floor deselect function. (d) Automatic return function (e) Car floor button flashing.(f) Inter facing with BGM speaker. | |||||
| 2.40(g) Emergency battery operated power supply in the event of light failure, this emergency service allows operation of a fan, light and alarm/hooter bell. (h) Multi beam doorsensor. (j) Nearest landing operating. (k) Maintenance operation and all connected items which is use in lift and lift machine room. Operation : Collective control system VVVFD Main drive : Make -Fuji, yaskawa, Monarch or as per OEM Control system : precision microprocessor logic control Door control : Multi beam door control covering full length of car and landing door, safety door return system Civil Works : MS Structural work & Plates etc grouting complete with bolts and nuts and including RCC / PCC foundation, dismentling old machine beam, earthing , aluminium strip and reconstruction machine beam , old U/S cable, machine , panel and good make distrubed floor plastering, wall plastering where removing old unserviceable cable , machine , panel etc and reconnect the all earthing strip with all electric/ mechanical connections. | |||||
| 2.50Electrical work : Machine room new wiring as existing site incl all fittings /fixture with new PVC casing / caping & point wiring for tube lighting, socket , exhaust fan point, will be done by the contractor at time of new lift install and before completion of site work incl provn of switch /socket /iron box /sheet/screws etc ceilingrose or as per existing only, remove debries/old unserviceable item/machine/ old cables and from machine room area will be cleaned before handing over the lift and all work cost included in lift cost , no extra payment will be given by the Department complete all as directed by Engr -in-Charge Note: (i) Contractor must obtain the necessary permission & licence from State Govt Electrical lift inspector before erection of lift and the rate quoted deems to be inclusive of all the expenditure incurred for the same. (ii) The make shall be approved by Accepting Officer with considering criteria as specified in Particular Specifications. (iii) Necessary testing / IEM Commissioning to be carried out by the contractor on his own arrangement and submit the copy of report for record. (iv) If anything missed above but is technically required for efficient working of the lift is deemed to be included in the quoted rates. | |||||
| 3.00 | supply and fixing of 20 mm thick (table rubbed & mirror polished) granite slab machine cut over 15 mm thick bedding of cement mortar and jointed with grey cement slurry and pointed with white cement(1:2) using marble dust with admixture of pigment to match the shade of the granite stone on all around the lift entrance door fascia including grinding and polishing complete as all specified and as directed by Engineer in Charge. | 25 | Sqm | 5,000 ₹1,25,000 | 4,000 ₹1,00,000 Lowest |
| 4.00 | M&L for earthing with MS galvanised earth plate 600mmx600mmx6 mm thick, burried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level, connecting to GI Plate with 25 X 4 mm GI earth strip upto 7.5 Mtr long from earth point to test point by means of bolts, nuts, check nuts, washers and provision of charcoal, salt etc including watering arrangement with 15 mm dia GI medium grade pipe, and 40mm dia GI pipe for protection of GI strip ,MS funnel, PCC chamber in cement concrete 1:3:6 type C1 and finished even and smooth without using extra cement, 50 mm thick RCC cover 1:2:4 type B1 including 10 mm dia deformed bars @100 mm c/c on both ways for full size of chamber complete all as per electrical plate No 5 including necessary excavation and earth work in any type of soil complete all as directed. | 2 | Each set | 10,000 ₹20,000 | 9,860 ₹19,720 Lowest |
| 5.00 | M&L for GI earth conductor or main earthing strip 32X6 mm thick GI strip fixed to wall on batten/ buried in ground/ paased through PVC pipe , extension of existing earthing lead all as per specified and directed by Engr - in - charge. | 30 | RM | 350 ₹10,500 | 180 ₹5,400 Lowest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
1 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Vinay Kumar, IDSE, SE (SAG), CWE
Headquarters Commander Works Engineer (Army) 24 Assaye Building, Colaba Mumbai-400 005
REPLACEMENT OF GOODS LIFT 1 NOS AGAINST BER IN P 2 BLDG 2ND WING AT DGQA COMPLEX VIKHROLI UNDER GE NORTH SANTACRUZ MUMBAI
2025_MES_720802_1
85176/N/E8
Open Tender
Civil Works
Item Rate
180 days
Santacruz Mumbai
As per NIT
8 documents required · 8 mandatory
₹500
GE North Santacruz
₹50,000
Yes
11 Nov 2025
16 Jul 2025
3 Sept 2025
16 Jul 2025
1 Sept 2025
18 Aug 2025
16 Jul 2025 - 23 Jul 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .