Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.6 LAccepted-AOC 00 C O PARMOD SINGH BAKTA BARHI CHINTAMAN SITAMARHI BIHAR 843315 | SITAMARHI | BIHAR | 843315 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹45.8 L+₹2.2 L (4.97%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST | |
| 3 | L3₹46.1 L+₹2.5 L (5.64%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST | |
| 4 | L4₹47.3 L+₹3.7 L (8.51%)Rejected-AOC B 12 VISHAKARMA JYOTI SUBHASH LANE MALAD E MUMBAI 400097 | MUMBAI SUBURBAN | MAHARASHTRA | 400097 | L4 | Rejected-AOC NOT LOWEST | |
| 5 | L5₹48.6 L+₹5.0 L (11.4%)Rejected-AOC 38 30 92 SAI NAGAR MARRIPALEM VISAKHAPATNAM 530 018 | VISAKHAPATANAM | ANDHRA PRADESH | 530018 | L5 | Rejected-AOC NOT LOWEST |
Tender Value
₹47.6 L
EMD Value
₹95,200
Closing Date
30 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) MANKHURD
GE (NW) MANKHURD MuMBAI
ADD/ALTN AND SPL REPAIRS TO ROOF BUILDING NO P-130 (1167 DSC IN-LIVING BLOCK) AND P-92 (52 B DSC IN-LIVING BLOCK) AT HQ 31 WEU THANE UNDER GE (NW) MANKHURD
2023_MES_615982_1
8238/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) MANKHURD
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE (NW) MANKHURD
₹95,200
Yes
7 Dec 2023
5 Sept 2023
2 Oct 2023
5 Sept 2023
30 Sept 2023
13 Sept 2023
Amount
Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed.
M&L for Ready mix plaster 10mm thick on faces of bricks or concrete surface including necessary scaffolding upto 18m height, including preparation of wall surfaces etc complete all as specified and directed,
M&L for Ready mix plaster 15mm thick on bricks or concrete surface including dubbing coat to match with existing with necessary scaffolding upto 18m height including preparation of wall surfaces etc complete all as specified and directed,
Chipping, removing carefully loose/damaged concrete incl plastering (total thickness upto 60mm ) from RCC surfaces of columns, beams,Chajas, soffits of slabs etc by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land, complete all as specified and directed. Note: Hard concrete shall not be removed by force.
M&L for cleaning existing reinforcement by sand blasting with suitable pump as directed by the GE and wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)
M&L for Anticorrosive Treatment to Reinforcement Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed. Note:- Mode of measurement: superficial area of concrete will be measured.
M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.
M&L for building up the profile of structural members by using Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 20mm thickness including levelling, profiling etc complete all as specified and directed.
M&L for building up the profile of structural members by using Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 40mm thickness including levelling, profiling etc in two layers, each layer not exceeding 20mm, complete all as specified and directed.
M&L for casting & repairing of excessively damaged distressed RCC members (exceeding 60mm in thickness) with prebatched, prepacked, single component ready to use microconcrete from Fosroc (Renderoc RG) or equivalent of Dr. Fixit as approved by GE, at any level/ height and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications and all other relevant worksincl scaffolding upto 18 mtr height complete all as specified and directed. (Note : Reinforcement only shall be measured and paid separately).
Demolition of brick/cement concrete (unreinforced) / pcc tiles from existing roof/terrace etc in any position including cleaning the surfaces of roof etc with wire brush complete and removing the retreived debris out side MD land, all as specified and directed.
M&L for PCC (1:2:4) type B-0, using 12.5mm graded stone aggregate as in levelling course over RCC roof surface to achieve required slope, benching etc including making rounded or chamfered on edges mixed with WPC as per manufacturer's instructions, complete all as specified and directed.
M&L cement plaster (1:3) with 10 mm thick to be finished smooth without using extra cement mixed with WPC @ 2% by weight of cement, , complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only.
M & L for APP modified roof treatment over existing roof slab etc including taking down to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sq cm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%. (d) Over the membrane provide a finishing with solar reflective bitumen aluminium paint @ 0.10 Kg/Sqm as prescibed by manufacturer.
M&L for applying one coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm over APP membrane for non accessible roof complete all as specified and directed.
M&L for leakage / seepage proof coating consisting of preparing the new surfaces of existing exterior walls, parapet walls, chajjas etc. and applying Primeseal primer of M/s Dr Fixit or equivalent chemical of M/s STP Ltd as approved by the GE or one coat of Chemstic PDE 600 elastomeric coating (and allowing to dry for 8hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system Raincoat of M/s Dr Fixit with DFT 100microns or Shalicryl 215 of M/s STP Ltd or Chemstic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8hours before application of next coat) including necessary scaffolding etc complete all as per manufacturer instructions and all as specified & directed. Notes: (i) The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE.
M&L for prepration of newly plaster/concrete surface of wall and applying two coat of distemper oil emulsion on walls with one coat of primer ( chalk white on plastered surfaces) and including 3mm thick putty applying complete all as specified and directed
M & L for preparing old decorated surfaces of wall (plastered or unplastered or previously white washed ) & applying one coat of white wash complete all as specified
M& L for preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed
M& L for complete removal of existing treatment on surfaces of walls and applying two coats of oil bound distemper over chalk whiting including one coat of primer applying on walls for smooth finish complete all as specified & directed
Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or thicknes in floors , aprons etc
M&L for coloured glazed ceramic tiles 300x200x6 to 7mm thick set and jointed in neat cement slurry and pointed with coloured cement as in skirting/dados including 10mm thick rendering in CM 1:4 as in backing coats of tiles finished the surfaces rough to receive tiles etc complete all as directed and specified.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick CM 1:6 screed bed for laying floor finishes all as specifed and directed..
M&L for coloured glazed ceramic tiles Glazed ceramic tiles invertical surface 350x 250x 6-7 mm/ 450X 350X 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dados including 10mm thick rendering in CM 1:4 as in backing coats of tiles finished the surfaces rough to receive tiles etc complete all as directed and specified.
M&L for 10 mm thick vitrified tiles (square/rectangualr) light shade polished area of each tiles not exceeding 0.36 Sqm, in floors over screed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete including 15 mm thick CM 1:6 screed bed for laying floor finishes all as specifed and directed..
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75mm thick, with expansion joints & top surface finished even and smooth without using extra cement etc complete all as specified and directed.
S&F in repair 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including dismantling if any
Taking up or down steel water tubing and connections of size 15mm bore, complete all as specified and directed.
Taking up or down steel water tubing and connections of size 20mm bore, complete all as specified and directed.
Supply and fixing of 16 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (including provision of special fittings i.e. brass elbow, brass tee, Male brass threaded adaptor, female brass threaded adaptor etc required for fixing of bib tap, stop valve with CPVC pipes) concealed in walls/ ceiling or laying in floors etc., also including cutting chases, grooves and making good the same in CM 1:3 after fixing of pipes / fittings, complete all as specified and directed.
Supply & fix 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
Supply & fix 40mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, including taking down and removal complete all as specified and as directed.
S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia out let including grating connecting jointing to waste pipe and taking out existing unserviceable traps by hacking out concrete joints and making good of surfaces complete all as specified and as directed .
S&F PVC connections 15mm size with PTMT nuts of length 600mm
S&F in repair towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (Min wt 190 gms)
S&F in repairs high level/low level PVC flushing cistern with PVC flush pipe, brackets, and PVC connection complete of 10 Ltr capacity.
S&F in repairs 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated.
S&F in repairs 15mm bib taps two way cock, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated. Make : Jaquar or Equivalent
S&F in repairs pillar taps 15 mm; of cast copper alloy with capstan; head chromium plated screwed downend with pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe& fixed complete all as specified
S&F in repairs stop cock 15mm cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass chromium plated with fancy type shank and cup(concealed type)
S&F in repairs Grating doom 100mm dia of PTMT
S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) ® Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms
S&F hand shower (health Faucet) with 8mm dia 1 mtr Long flexible tube & wall hook complete all as specified
S&F in repairs Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe flat back, size 580x450irun (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets
S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm
M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over screed bed or bedding layer of morar 15 mm in cement mortar 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including dismantling of existing tiles all as specified and directed
M&Lfor Marble work 18 to 20mm thick of any any colour as directed (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over screed bed or bedding layer of morar 15 mm in cement mortar 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including dismantling of existing tiles all as specified and directed
M&L for 35 to 40 mm thick machine cut, prepolished cuddappa stone slab as in plateform for fixing oval shape wash hand basin(including cutting the slab to oval shape to accomdate the sink and WHB), pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of stone slab etc,also including moulding/rounding to edges of the slab, including dismantling of existing tile slab complete as specified and directed.
M&L Machine cut kota stone slab flooring 20-25mm thick as in flooring, treads, risers, landing etc over 15mm thick cement screed base CM 1;6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing floor complete all as directed.
All as item above but except stone (for mirror polished only)
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations
Hacking out old broken glass (any thickness, size, quality or description) from metal frame/aluminium frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.
Taking down carefully existing aluminium sliding window shutters, taking down of existing broken 4 mm thick plain sheet glass from aluminium sliding window shutters including existing rubber gasket complete, supply and fixing 4 mm thick plain sheet glass with and including provision of new rubber gasket and re-fixing the shutters in existing position, complete all as specified and directed.
Taking down carefully existing aluminium sliding window shutters, taking down of existing stainless steel wire mesh from aluminium sliding window shutters including existing rubber gasket complete, supply and fixing stainless steel wire mesh of dia 0.36 mm and average width of aperture 1.40 mm with and including provision of "U" clip, re-fixing the shutters in existing position, complete all as specified and directed.
Taking down carefully aluminium sliding window shutters from the frames or chowkhat and supply and fix New locking arrangement in place of old one and re-fixing the same shuters in existing position etc, complete all as specified and directed
S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all complete all as specified and directed.
All as per item no. 60 above, but 75mm bore in repair
S&F in repair Vitreous china squatting pan orrisa pattern of size 580 x 440mm with integral foot rest and 'P' or 'S' trap including lime concrete bedding connecting flushing pipe and taking out old WC pan & lime concrete and unserviceable connections and making good for floor etc complete all as specified and as directed
S&F in repair Vitreous china Wash down water closet (Pedestal pattern), complete white (excluding fixing bolts, flushing cistern and flush pipe) and 'P' or 'S' trap including lime concrete bedding connecting flushing pipe and taking out old WC pan & lime concrete and unserviceable connections and making good for floor etc complete all as specified and as directed
S&F 110mm bore PVC (SWR) bends
S &F PVC (SWR) bends, 75 mm bore,
S &F PVC (SWR) junction single(single T), 110 mm bore, equal or unequal
S &F PVC (SWR) junction single(single T), 75 mm bore, equal or unequal
S &F PVC (SWR) branch piece,double( Singe Y) 75mm bore equal or unequal
S &F PVC (SWR) branch piece,double (single Y) 110 mm bore equal or unequal
Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) exceeding 1.5 Sqm but not exc 4 Sqm each including complete all as specified and directed.
Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) Sqm but not exc 1.5 Sqm each including complete all as specified and directed.
S& F second class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good disturbed surfaces of wall complete all as specified and directed
S&F Glazed and skelton shutters, 30 mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) )complete all as specified and as directed.
S&F stainless steel wire cloth 0.36mm mm nominal dial of wire and average width or aperature 1.40mm for fixing to wooden door/ window shutters in any position with new beads/ steel section as required for securing including dismantling of old jalli and painting to match with existing complete all as specified and as directed.
S&F Factory made Plain framed, panelled shutters, 35 mm thick of second class hard wood (Hollock) (any numbers of panels) with panels of 12 mm thick veneered particle board exterior grade medium density with commercial veneering on both faces with sheesham wood beading all round the panel made out of 20 by 15 mm , on one side and fitted to chowkhats complete all as specified and as directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with Square tube, supply and fixing in opening as per specification given under SSR Part II 2010 including making good the disturbed surface all as specified and directed. Make: SYNTEX/SHALIMAR/RAJSHRI
M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2020 complete all as specified and directed. Make : SYNTEX/SHALIMAR/RAJSHRI
S&F 100 mm long stainless steel butt hinges fixed with stainless steel screw
S&F aluminum anodised barrel tower bolts of extruded section of size 150 mm length
S&F aluminum anodised barrel tower bolts of extruded section of size 200 mm length
S&F 150 mm extruded aluminum alloy handles, fabricated type anodised
S&F aluminum anodised sliding door, bolts with hasp and staple ( bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, length of bolts 250 mm.
M&L PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in hold fast, bed plate, coping, surface chanels etc including necessary form work complete all as specified and as directed.
M& L for preparation surfaces of new or previsouly untreated wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
M& L for preparation old surfaces of wood of any description over 10 cm width or girth and applying One coat of synthetic enamel paint as specified.
M&L Preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 centimetre width or girth and applying One coat of synthetic enamel paint complete all as specified and directed.
Taking down existing aluminium joinery and windows of any description (frame/ shutters) with all fittings (but excluding grills) complete all as specified and directed.
S&F standard aluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE ) as in frame, shutters for doors, window / ventilators, fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes, shall be measured and paid separately as supply only under respective item.
Supply only 4mm thick sheet glass, ordinary quality fixed in aluminium window along section all as specified and directed
Supply only Stainless steel wire cloth.0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples in aluminium windows or along with 'F' section complete all as directed by EIC.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc, complete all as specified and directed.
S&F bands, straps , supports or stays for rain water, ventilating pipes including bolts, clamps, hold fasts etc and similar small articles to Fe-410-0 or Fe-310-0 all as specified & directed.
S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of roof sheet any type complete all as specified and directed
M&L two coat of synthetic enamel paint over red oxide over preparation of new steel surface complete all as specified.
M & L Cement Concrete Type D2 1:4:8 (40 mm graded aggregate) in subbase 75 mm thick
M & L Chequered cement concrete Endura tiles 25mm thick glossy finished , set, jointed and pointed in neat cement slurry in floors over 15 mm thick screed in CM (1:6) all as directed
Dismantling of brick work /stone boulders built in cement mortar including all quins, arches, pillars etc complete all as specified and as directed.
M & L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius built CM 1:4 complete all as specified.
S& F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. 20 mm dia
M & L for preparation of existing water proofing treatment at the top of G+4 bldg and over Projected Chajjas by providing and laying Shali Urethane BTD of STP Ltd or equivalent, Poly Urethane based for water proofing treatment using high elongation based (>500%) liquid applied elastomeric water proofing membrane with separate wearing course as per ASTM C-836, Thickness of the membrane shall be 1.5mm incl re-inforcement. After surface cleaning prime the surface with mixture of Shali Urethane BTD: water 50:50 ratio and apply @ 400gm@ Sqm. After complete drying the surface has to be dampend with coating. Subsequently apply 2 coats of Shali Urethane BTD by brush or roller on prime surface @ 1Kg/Sqm to get required thickness with non woven FG reinforcement surface complete all as per manufacturer instruction all as specified and directed.
Taking down existing aluminium grills from balcony/ any locations complete all as specified and directed.
S&F aluminium anodised Grills of approved design for window / ventilators and fixing with F/U channel including drilling as required in RCC sections in rectangular or architectual type balcony opening in existing building, complete all as specified and directed. Note: The Grills shall be of Model DG-100/DG-102 of Make Deco or equivalent make as approved by the GE.
M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces using CM 1:4, finished the surface even and smooth all as specified and as directed.
S&F cast iron covers and frame grade FG 150 unmachined as in manhole covers etc including locking arrangement,and removing old Unsv covers complete all as specified Note : A sum of Rs 48080.00 towards sch of credit shall be deducted to arrive the contract sum.
venus enterprises
AM ENTERPRISES
Vishal Builders
Anjali Constructions
Joy builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .