VP AD Mines 21-22-Thirumalapuram-PDF renovation

Amount

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 ( one cement Two sand and four aggregate ) using 10

Plastering with cement morter 1:5 12 mm thick in all floors including curing etc., complete complying with standard specification and as directed.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams sunshades facia canopy slab staircase waist slab landing slab etc., with cement mortor 1:3

Pastering with cement morter 1:3 (one cement and three sand 20 mm thick mixed with water proofing compound conforming to BIS at 2 % by weight of cement used including finishing, curing etc., complete.

Supply and fixing in position indian water closet (Oriya type) of size 580*440 mm white glazed earthern ware of approved quality and brand with "p" or "s" tran conforming to BIS with sand cushion

Supplying and fixing in position best quality PVC soil / wastepipes of various dia having 6 kg /sq.cm. pressure BIS mark and prividing leak proof joints using PVC adhesives including fixing to the wall with special PVC /MS clamp ,Teak wood plugs , brass screws,etc., and making connection to all sanitary fittings

110 mm dia PVC soil/ waste pipe

75 mm dia PVC soil / waste pipe

Supply and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks ,dismantling the masonry or RCC works and redoing the dismantled the portion to orginal condition etc., complete complying with standard specifications.

110 mm Dia

Elbow

75mm Dia

Elbow

Fabrication, Supplying and fixing if steel door made out of 40X40 X6mm M.S angle section for outer frame and shutter made out of 35x35x5mm M.S angel section with necessary stiffner 32x6mm flats not exceeding at 30em intervals and necessary cross diagonal M.S flat of size 32x6mm. A tie bar of 32x6mm M.S flat it used in bottom fo frame in order to avoid twisting of door frame. The shutter frame shall be fully covered by 18 gauge C.R.CA sheet and provided. A tiebar is privided at the bottom of the outer frame toprreven twisting of frame during transportationa and fixing. (1.00x2.10) All memvers should be given one cost of materials labour charges and all incidential charges and fixing charges.

Fabrication, Supplying and fixing if steel door made out of 40X40 X6mm M.S angle section for outer frame and shutter made out of 35x35x5mm M.S angel section with necessary stiffner 32x6mm flats not exceeding at 30em intervals and necessary cross diagonal M.S flat of size 32x6mm. A tie bar of 32x6mm M.S flat it used in bottom fo frame in order to avoid twisting of door frame. The shutter frame shall be fully covered by 18 gauge C.R.CA sheet and provided. A tiebar is privided at the bottom of the outer frame toprreven twisting of frame during transportationa and fixing. All memvers should be given one cost of materials labour charges and all incidential charges and fixing charges( 0.90x2.10)

Solid PVC door shutter using 19 gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm Thick soild PVC sheets (0.90.X2.10)

Manufacturing, Supplying and fixing in position of steel windows with the following specifications, Outer frames of windows made of 'Z' section F7D of size 33X25X3 mm at 1.419 kg/m and mullion 'J' Section (F4B) of size 64X25X3mm at 2.28 kg/m and shtter section of made of F7D of 33X25X3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter

Two leaves (1.00X1.30)

Supplying, fabricating and placing in position fo steel glazed ventilator wit two panes in all floors with aluminium section of the following sized with

Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18GI sheet. He shutter shall be painted with

White washing on coat with freshly burnt white shell lime in allfloors including cost of lime, blue powder fevicol type gum, grushes, scaffolding charges, etc.,

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning

plastic emulsion painting the walls with two coats of paint over the one coat of cement primer as instructed by the departmental officers including

Painting new iron works such as steel doors, windows ventilators windows bars balustrades etc., with two coats of best approved first quality and colour

Provision for Water Supply Arrangement

Provision for 500 liter HDPE tank

25 mm PVC pipe

25 mm PVC Elbow

25 mm PVC Ball valve

25 mm PVC Tee

20 mm Tap

Provision for Electrifcation

Light point / fan point

Plug point

Service Wire

Tube Light

Ceilling fan

16 AMPS unit

street Light

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

R. Valarmathi