Repair/maintenance of various Govt. Residential House (Type VI and Type IX) under maintenance booth Sector 19 Chandigarh. (Ch. to 2216 (N.P) Mtc. and repair)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. DSR 2.8

All kinds of soil. DSR 2.8.1

Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level :DSR 4.1

1:2:4 (1cement :2coarse sand :4graded stone aggregate 20mm nominal size) DSR 4.1.3

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 above plinth in:.DSR 6.4

Cement mortar 1:4 (1 cement : 4 coarse sand).DSR 6.4.1

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31 size 600x300mm

Providing and fixing pressed steel door frames confirming to IS:4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm,or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by EIC DSR No.10.14

Profile B

Fixing with adjustable lugs split end tail to each jamp DSR No. 10.14.1.1

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. DSR 10.25

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works .DSR 10.25.2

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easilyDSR 11.41.A

Glazed Vitrified tiles Matt/Antiskid finish of size DSR 11.41.

Size of Tile 600 x 600 mm DSR 11.41.2

12 mm cement plaster of mix :DSR 13.4

1:3 (1 cement: 3 fine sand) DSR 13.4.1

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade DSR 13.81

Old work (one or more coats)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR 13.88

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge DSR 15.2

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) -- c.c. Flooring DSR 15.2.1

Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required DSR 12.8

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10

Kitchen sink without drain board DSR 17.10.2

610x460 mm bowl depth 200 mm.DSR 17.10.2.2

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.DSR 17.15

Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto1 Mtr long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16.A

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete DSR 17.20

White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.DSR 17.28

32 mm dia DSR 17.28.1.1

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge DSR 17.81

Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21

15 mm nominal bore DSR 18.21.2.1

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 DSR 18.49

15 mm nominal bore. DSR 18.49.1

Providing and fixing C.P. brass long body bib cock 15 mm dia DSR 18.51.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points . DSR 18.53

15 mm nominal bore. DSR 18.53.1

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge DSR 18.53A

Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62

15 mm nominal bore, DSR 18.62.1

20 mm nominal bore, DSR 18.62.2

Prov.& fixing of looking Glass with PVC Beeding with Plastic hard board or with Stods complete all respect of approved make

Providing and fixing of Wall hung wash basin with full pedestal complete with C.I./MS brackets 32mm C.P. brass waste as per standard pattern including cutting and painting of brackets and making good the walls Make Cera Model CONCORD (Basin - 1022 & Pedestal 1121 ) or equivalent in the same price range or AOR

Providing and fixing of Bib cock with wall flange, make Jaquar range Continental Model CON-047KN or equivalent in the same price range or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of Anglular stop cock, with wall flange, make Jaquar range Continental Model CON-059KN or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC .

Providing and fixing of Long Body bib cock with wall flange, make Jaquar range Continental Model CON-107KN or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of Central Hole Mixer with 450 mm long braided hoses, make Jaquar range Continental Model CON-167KNB or equivalent in the same price range or AOR

Providing and fixing of Sink Mixer with Swiniging Casted Spout ( Wall Mounted Model ) with connecting legs and Wall Flanges complete make Jaquar range Continental Model CON-309KN or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of Wall Mixer 3 in 1 System with provision for both Hand Shower and Overhead Shower complete with 115 mm long bend pipe,Connecting Legs and Wall Flange make Jaquar range Continental Model CON-281KN or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing & fixing of Overhead Shower 180 mm Make Jaquar Model 1759 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing Shower Arm 450 mm long make Jaquar Model SHA-479L450 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing & fixing Hand Shower 100 mm Round Shape Single/Multi Flow Make Jaquar Model HSH-1937or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing Flexible tube for Hand Shower Make Jaquar Model SHA-549 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of Wall Bracket for Hand Shower make Jaquar or equivalent in the same range of AOR

Providing and fixing of C.P. Towel Ring Square with round flange complete in all respects make Jaquar range Continental Model ACN-1121N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of C.P. Soap Dish Holder complete in all respects make Jaquar range Continental Model ACN-1131N or equivalent in the same price range or AOR Make Jaquar

Providing and fixing of Glass Corner ( with bracket ) make Jaquar range Continental Model ACN-1171N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of Glass Shelf make Jaquar range Continental Model ACN-1173N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of C.P. Towel Rail 600 mm long complete in all respects make Jaquar range Continental Model ACN-1111NM or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing C.P. Toilet Roll Holder complete in all respect make Jaquar range Continental Model CAN-1151N or equivalent in the same price range or AOR

Providing & fixing Hand Shower (Health Faucet) (ABS Body) with 1-Meter-Long Easy Flex Tube in Chrome Finish & W all Hook Complete Make Jaquar Model ALD-585 or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Providing and fixing of C.P. waste complete in all respect

32mm dia for WHB

40mm for S.S. Sink

Providing and fixing of PVC tank cover

500/300 ltr cap.

Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal

Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO

Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO

Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO

Providing and fixing of one piece EWC Seat cover make Hindware , Model ELEMENT Complete in all respect or equivalent model of approved make to the satisfaction of EIC

Providing and fixing GI Tank Nipple 20 mm dia complete in all respect of approved make

Providing & Fixing CP Nozzel Tap any approved make complete in all respect

Providing and fixing of CP/SS Long Bend /short bend for OWC

Providing and fixing of C.P. pillar cock of approved make

Providing and fixing of fitting for low level flushing cistern of approved make.

Providing and laying of UPVC pipe, IS-4985 marked, Pressure 6 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation.

Providing and fixing white vitreous china water closet squatting pan (Indian type) : DSR 17.13

Orissa pattern W.C. pan of size 580x440 mm DSR 17.13.2

Providing and fixing of C.P. Tumbler Holder complete in all respects make Jaquar range Continental Model ACN-1141N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC

Please Enable Macros to View BoQ information