PROVN OF HARDSTANDING NEAR COMPRESSED GASSES STORE AT VARIOUS LOCATIONS, WATER STORAGE TANK NEAR POST OFFICE, IRON GRILL ON MAIN ENTRNACE DOOR AND WINDOWS AND TOILET WITH CHANGING ROOM NEAR CC OFFICE AND ADDN/ALTN TO CERTAIN SES BLDG AT AFS HAKIMPET

Amount

NOTES :- In case description of any two or more items of the schedule ‘A’ is same and the tenderer quotes different rates for such items, only lowest rate of such items will be considered for acceptance and subsequently payment will be made upon execution of the items accordingly.

Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed

M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed

M&L Cement concrete type B2 1:2:4 using 40mm graded aggregate in foundations, filling and mass concretecomplete all as specified and directed

M&L for 50mm thick sand cushion in flooring below interlocking tiles complete all as speified and as directed .

M&L for Machine pressed precast concrete inter locking paver blocks any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as speified and as directed .

M & L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as directed.

M&L Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

Excavating in trenches hard/dense soil nexc 1.5 m wide and nexc 1.5 m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type all as specified and directed.

All as per Item above but exc 1.5m depth and n exc 3.0m depth and getting out any type of soil all as specified and directed.

M&L Cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete all as specified and directed.

M&L for TMT bars 10 mm dia and over ,cut to length bent to shape required including cranking, bending, spirally hooping for columns and binding with MS wire (annealed) not less than 0.90mm dia wire etc complete all as specified and as directed.

M&L RCC M20 (Nominal mix) type A1 (20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams plinth beams; bases for columns, etc basement slabs, under-reamed piles and mass concrete all as specified and directed.

M&L RCC M20 (Nominal mix) type A1 (20mm graded stone aggregate) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and as directed.

M&L Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter all as specified and as directed.

M&L Rendering 15 mm thick in CM 1:4 on concrete or brick massonry surfaces of walls with WPC compound, finished even and smooth with out using extra cement all as specified and directed. Note : WPC to be measured and paid seperately.

Supply only water proofing compound to above item.

M&L Applying evenly 2 coats of polyurathane sealent, providing and applying cold applied elastomeric smart care damp proof ultra (fiber reinforced elastomeric liquid applied water proofing membrane) complete all as specified and as directed. Make : Asian Paints smart care waterproofing/Pidilite or equivalent.

M& L brick work with fly ash bricks straight or curved on plan exceeding 6 M mean radius built in CM 1:4 etc Complete all as specified and as directed

M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or all as specified and directed.

M&L Providing precast reinforced perforated concrete slabs type B1 (1:2:4) using 20mm aggregates set in CM 1:6 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

Excavating in post holes in soft or loose not exc. 0.50 cum and getting out, return filling and removing surplus soil to a distance not exc. 50 mtrs and making good disturbed ground Complete all as specified and as directed

M&L for PCC 1:2:4 type B2 ( using 40 mm graded aggregate) for angle iron post Complete all as specified and as directed.

S&F MS Angle/ flate iron/chanel framed work such as iron gate, ladder, SWT frame, grills, gratings, framed guard bars, hold fast ,incl necessary locking arrengement etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165 completed all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L for preparation of Newly Steel Surfaces of any description, over 10cm in width or girth,and applying 2 coat of Synthetic enamel paint over a coat of Redoxide primer complete all as specified.

S&F Stainless steel ladder anti corrosive 10 ft height complete all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dense soil as directed.

M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. all as specified and directed.

M&L 50mm sand filling under floor or in foundations including watering and consolidation all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed

Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-In-Charge

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-In-Charge

M&L 25mm thick Plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) laid in flooring as specified and directed by Engineer In charge.

M&L for non skid colour ceramic tiles of 300mm x 300mm of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles all as specified and as directed.

M & L Virified Ceramic tiles double charged/ultracharge shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm (size 600mmx 1200mm) , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles all as specified and as directed.

M & L Virified Ceramic tiles double charged/ultracharge shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm (size 800mmx 800mm) , for skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering coat/backing layer in CM (1:3) complete all as specified and directed

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water and removing the debris out of MOD land etc complete all as directed.

M & L for digital coloured glazed ceramic tiles of sizes 300mm x 600 mm X 7 mm thick jointed in neat cement slurry, in vertical surfaces laid over including 10 mm thick rendering coat/backing layer in CM (1:3) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting complete all as specified and as directed.

S&F Repair false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fiber Reinforced Gypsum ) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than2%, humidity resistance of 99%, NRC 0.5-0.75 as per IS 8225:1987, Non combustable as per BS 476 (part 4 )-1970 and light reflectance 85% min to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120 grams per sqm including both sides) comprising of main -T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15x32 mm of length1200mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm , suspended from ceiling using galvanised mild steel items ( galvanising @ 80 gms per sqm) i.e. 50mm long, 8 mm outer diameter M6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall SS screws all as specified and directed by Engr-in -charge.

S&F Plywood, grade BWP, type BB of 12mm thick with 7 Nos of plys, fixed with screws to timber frame including 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 40 mm complete all as specified and as directed.

S&F brass magnet for cupboard with locking system complete all as specified and as directed.

S&F 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed.

M & L for 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rounding edges,grinding and polishing complete all as specified and as directed.

S&F in counter top wash hand basin oval shaped 550x430x195mm with all fittings as waste coupling , CP bottle trap,waste pipe PVC connection etc complete all as specified and directed. Make: Parryware Cat Part No. 4715/CERA / Hindware

S&F 15mm bore pillar taps of swan neck type CP brass chroium plated fancy type screwedd down high pressure with CP screwed shanks and fly nuts complete screwed for pipe all as specified and directed Make : Prayag Catpart No 6314N /Hindware/CERA/Parryware

S&F water closet 'S' trap Ivory colour 680 x 370x 750mm with soft close seat cover with twin flusing cistern fittedon floor with wall distance 225mm +/- 10mm from the wall complete all as specified and directed. Make : Hindware / CERA/Parryware or equivalent

Taking down chowkats or frames not exc. 1.5 Sq mtr each with shutters without taking off shutters from the frames complete all as specified and as directed by the Engineer-in-Charge

All as per ser Item as above but exc 1.5 Sqm and not exc 4 sqm each complete all as specified and as directed by the Engineer-in-Charge

S&F Toughened glass door (Frame less) with 12mm toughened glass,swing type with 25mmx450mm H type handle both side with soft door closer system with all fittings which are necessary for installation complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.complete all as specified

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 100 mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed by the Engineer-in-Charge

S&F 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge

S&F 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge

S&F alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed by the Engineer-in-Charge

S&F 32mm Dia PVC waste pipe for sinks or wash basines etc,. in repairs complete all as directed by the Engr-in-Charge.

S&F 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed in repairs complete all as directed

S&F 15mm bore angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair

S&F 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.

S&F in Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in repairs all as specified and directed.

S&F in repair sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) and fixed in repairs all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) and fixed in repairs all as specified and directed.

S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe. Make : Parryware Cat No 19941A1 /Hindware/Cera

S&F in repair for 15mm dia Two way bib cock CP fancy type fixed to GI pipe complete all as specified and direted Make: Parryware Cat No G3167A1/ Hindware/ Cera.

S &F 75 mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 all as specified and directed.

Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed.

S &F 75mm bore PVC(SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.

S &F 110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.

S &F 75mm bore PVC(SWR) bend all as specified and directed.

S &F110mm bore PVC(SWR) bend all as specified and directed.

S&F 75mm bore PVC(SWR) junction single (Single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC(SWR) junction single (Single T) equal or unequal complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed

Taking up or down steel tubing and connections 20mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed

Supplying and laying 16mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F in repair 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including dismantling existing old water tank all as specified and directed.

S&F in repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe all as specified and directed.

S&F in 25 mm dia mild steel, chromium plated curtain rods with fixing brackets, stops, rollers etc.and taking down old pipe complete all as specified and as directed by the Engineer-in-Charge.

Rendering 5mm thick in CM 1:3 on ceilings fcomplete all as specified and directed

M&L 3 mm thick wall care putty on wall surfaces finished even and smooth all as directed.

M&L for two or more coats of 1st quality acrylic distemper (ready mix) havind VOC content less than 50gms/litre,of approved manufacturer,of required shade and colour complete as per manufacturers specification including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge.

M&L preparation of old destempered or painted surfaces of ceilings including cornices and applying one coat of oil bound distemper,white or tinted including removing of nails,making good holes,cracks,washing floors,cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy including necessary scaffolding required at site complete all as specified.

M&L preparation of old painted surfaces of walls/stone surfaces and finishing walls with two coats of premium acrylic smooth exterior paint with silicone additives of required shade @ 1.43 Ltr/10Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10Sqm) using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified

S& F MS Powder Coated Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165(cut to ordinary lengths complete all as specified and directed by engineer in charge.

Cutting holes into or through brick walls built in cement mortar or cement lime mortar Superficial area Exc. 150 sq. cm but n exc 400 sq. cm. and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed by engineer in charge.

M&L for PCC 1:2:4 type B-0 mix (using 12 mm graded stone aggregate) for back filling of hold fasts to wall

Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed.

S&F brass CP shower rose with arms 75 mm size fixed all as specified and directed.

S&F Chromium plated (CP) Toilet paper holder of vitreous china fixed to walls brass screws complete all as specified and directed

S&F Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and directed

S&F CP Towel ring for WHB complete all as specified and directed

S&F concealled stop valves 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.

Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as directed.

M&LComplete Removal Of Existing Surfaces and applying two coats of Ist Quality acrylic distemper ready mixed having VOC content less then 50 gms/ltr of approved manufactures over a coat of primer and chalk whiting with using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge.

M&L preparation of newly plastered surfaces of walls including cornices and applying two coats of cement based paint over a coat of chalk whiting primer with using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge.

S&F Repair false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fiber Reinforced Gypsum ) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than2%, humidity resistance of 99%, NRC 0.5-0.75 as per IS 8225:1987, Non combustable as per BS 476 (part 4 )-1970 and light reflectance 85% min to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120 grams per sqm including both sides) comprising of main -T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15x32 mm of length1200mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm , suspended from ceiling using galvanised mild steel items ( galvanising @ 80 gms per sqm) i.e. 50mm long, 8 mm outer diameter M6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall SS screws all as specified and directed by Engr-in -charge.

M&L Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) laid in base, mass concrete all as specified and directed by Engineer In charge.

S&F Steel work as in tubular / L post trusses,plates, purlins including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified.

Rendering 15mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces on walls finished even and smooth without using extra cement complete all as specified and as directed.

M&L 3 coats of white wash over a coat of primer on newly plastered surfaces on ceilings complete all as specified and as directed.

S&F mild steel work as in Joist, channel, angle, or tee sections,Gusset plate, nut and boltsetc fixed independently of grade Fe 410-W(Gde-E- 250)quality-A, without connecting plates, etc. (cut to ordinary lengths complete all as specified and directed by engineer in charge.

M&L 75mm thick Plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) Laid in base of flooring as specified and directed by Engineer In charge.

M&L for Heavy Duty Pavement tiles of size 400x400x12 mm/300x300x12 mm thick for out door spaces any colour/pattren of anti skid , anti bactiarial stain resitance and scratch resitant tiles(Endora tiles) and pointed in chemical laid over 15 mm thick screed bed or bedding layer in CM 1:6 Complete all as specified and directed.

Supply and lay pipe galvanized, "Medium class", ISI marked, including fittings 80mm dia, conforming to IS 1239:latest complete all as specified and directed by Engineer-in-charge

Supply and lay pipe galvanized, "Medium class", ISI marked, including fittings 65mm dia, conforming to IS 1239:latest complete all as specified and directed by Engineer-in-charge

Supply and lay pipe galvanized, "Medium class", ISI marked, including fittings 50mm dia, conforming to IS 1239:latest complete all as specified and directed by Engineer-in-charge

Supply and lay pipe galvanized, "Medium class", ISI marked, including fittings 25mm, conforming to IS 1239:latest dia complete all as specified and directed by Engineer-in-charge

M & L Gun metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm dia, class-2 withstanding pressure upto 1.6MPa, conforming to IS 778:latest complete all as specified and directed by Engr-in-charge.

M & L Gun metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe and fixed of size 50mm dia, class-2 withstanding pressure upto 1.6MPa, conforming to IS 778:latest complete all as specified and directed by Engr-in-charge.

Supply and fix butterfly valve 65 mm (2.5”) dia conforming to IS 13095 all as directed and specified by Engineer-in-charge

Supply and fix Foot valve 80 mm (3”) dia, cast iron, flanged type conforming to IS 4038 all as directed and specified by Engineer-in-charge

Supply and fix non-return valve 65 mm (2.5”) dia, flanged type, PN 1.0, Cast iron all as directed and specified by Engineer-in-charge

Supply and fix 15mm GI nipple complete all as specified and directed by Engineer-in-charge

Material and labour for cutting of road / hard standing not exc . 1.5 mtr wide and not exc. 1.5 mtr deep for laying and taking out water pipe line including making good the disturbed portion as per existing earlier complete all as specified and directed .

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mps working pressure etc complete in all respect as specified specified and as directed by Engr-in-charge.

Supply, install, testing and commissioning of centrifugal monoblock pumpset electric driven 415V TP suitable for suction and discharge pipe 80 x 65 mm size , 5 HP Capacity head 16- 28 mtr and flow rate of 858 -384 LPM complete all as specified and directed by Engr-in-charge.

Supply and fix pressure gauge, range -0-21 Kg/cm², 4" dial including getting pipe ready for gauge installation complete all as directed.

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed

M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable in accordance with IS 694 with proper colour coding, 1100 volts grade drawn in ISI marked MMS non-metallic PVC conduit of size not less than 20mm dia conforming to IS 9537:latest, concealed type terminated in sunken type GI sheet metal flush boxes of 16 Gauge (i.e. 1.6mm thickness) including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. In case the flush box needs to be installed on surface, prior approval must be taken from the Engineer-in-charge and surface modular boxes made of FR grade ABS of minimum 1mm thickness with rounded corners need to be used instead of metal flush boxes. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

All as per item here-in-before but with 2.5 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

All as per item here-in-before but with 4 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for ACs and geysers

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

S&F modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

S&F modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

S&F modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

S&F modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

S&F modular fan regulator 100 W 2 module, socket type and capacitive type all as specified and directed by Accepting officer

S & F earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for PoP ceiling, Flicker-free operation, <5% THD including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-charge

S & F 4ft 20W LED batten tubelight surface/wall mounted with powder coated Aluminium housing, high optically efficient polycarbonate diffuser, inbuilt electronic driver duly wired upto terminal block, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 all as specified and directed. Model: Crompton Linea Pro LDLLPM20-CDL/NW/WW or Wipro garnet D552040 or similar

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt 240 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete, all as specified and directed.

Taking down distribution boards / main switches of any type, size and capacity complete all as specified and directed by Engr-in-charge

Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and directed by Engr-in-charge

Fixing of sheet metal enclosure powder painted for MCCB DB VTPN 04 way double door with MCCB incomer, IP-42 protection, Din rail and busbar complete all as specified and directed by Engr-in-charge.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 4 Sqmm drawn through PVC conduit/casing capping including accessories with 4 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge. Model: Havells ENDURASUNDOWNSL35WLED765PASYBOPC or Philips BRP331 LED42 CW R5N PC PSU S1 /CG

S&F ceiling fans complete with blades, anti-suicide down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) without remote control complete all as specified and directed by Engineer-in-charge.

S&F ceiling fans complete with blades, anti-suicide down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) with remote control complete all as specified and directed by Engineer-in-charge.Model: Havells stealth air

S&F electric water heater, vertical storage type with ferroglass coated anti-rust inner container and heating element upto 2 KW capacity 25 litre, heavy duty anode rod, preset thermal cutout, BEE 5 Star rated as per latest BEE norms (i.e. standing losses ≤ 0.465 kWh/24 hour/45°C which is only valid till 31st Dec 2025, material shall be supplied as per latest revision at the time of supply, complete with all accessories such as safety valve, thermostat, NRV, connection piece(hot and cold water connection pipe) etc complete all as specified and directed by Engr-in-charge. Model: Havells Monza GHWAMOSWH025 or Crompton Arno Neo ASWH-3025 or similar

S&F stop valve of dia 20 mm with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed by Engr-in-charge.

S&F bib tap of dia 20 mm cast iron alloy with crutch or butterfly handle screwd for iron pipe to outlet pipe of geyser complete all as specified and directed by Engr-in-charge.

S&F of any length CPVC pipe of dia 20 mm dia manufactured as per IS : 15778 including connection sockets, elbow and brass tee for connecting pipes etc and connecting pipe to inlet and outlet of the geyser complete all as specified and directed by Engr-in-charge

S&F in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 25 sqmm 4 core complete all as specified and directed

Excavation in trenches not exc 1.5 wide and not exc 1.5 mtr deep and getting out in hard /dense soil for laying pipes complete all as specified .

Supply and fill riddled soil obtain from excavated soil upto depth of 30cm (8cm below cable and remaining above cable) for cushioning of cable complete in respect all as specified and as direcred by Engr-in-Chrage. Note : (i) Excavated soil shall be riddled by using sieve to seperate composite particles etc as per IS 1255:1983 and refilling in trenches as in cable cushioning. (ii) Punning thickness shall be measure for payment.

Returning and filling in soils , including spreading ,levelling ,watering and well ramming in layers not exc 25 cm thick complete all as specified and directed .

Removal of excavated material to a distance not exc 50 mtr away from starting point and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed .

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed by the Engineer-in-charge

Supplying, installing, commissioning and testing of split type air conditioning unit indoor / outdoor complete with cordless remote control unit and with in built with BEE 5 star rating inverter type with CFC refrigerant 2 tonne capacity, BEE 5 star rated (As per latest BEE norms as applicable, ISEER must be atleast 5.0 ) including the complete all as specified and directed Note :- The unit rate quoted by the contractor shall deem to be inclusive of (i) Cutting holes in walls / windows of any thickness for installation of AC, connection and making good the disturbed surface to match with the thickness for installation of AC etc, connection. (ii) Electric cable of size 4 sqmm copper conductor PVC sheathed and of required length to connect outdoor unit and outdoor unit to voltage stablizer. (iii) Copper piping with insulation and drain piping.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by Engr-in-charge

M&L for cutting holes suitable for fixing of exhaust fan of size 250 mm into through stone walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete all as specified and directed by Engr-in-charge.

S&F of wall mounted fans of 400 mm sweep with all accessories 230 V, air delivery 95cum/min complete all as specified and directed by Engr-in-charge. Model: Havells Swing HS or similar in Bajaj/Crompton

Supply only of rechargeable desk light with brightness control , 5W, shade material polycarbonate, brightness of 400 lumens, adjustable arm complete, all as specified and directed.Model: Philips Orbit

Supply 12" gold life smart down rod (Anti suicide fan rod) MS pipe zinc plated, 19mm OD, 1.8+/- 0.05mm thick, spring set grade 3 carbon steel material zinc plated, MSME tested for performance test and opening at impact load of 22 kgf + and spring hidden in pipe will expand to about 1 mtr or more, powder coated white colour for ceiling fans of any size with all accessories complete all as specified and directed by Engineer-in-Charge.

Removal and refixing of earth plug sockets after cleaning externally complete all as specified and directed by Enigneer-in-charge

Disconnecting of recess type 2x2ft LED light fittings and refixing the same after ceiling work complete all as specified and directed by Engr-in-charge.

Disconnecting of air conditioners along with stabilizers and accessories and refixing the same after wall work complete all as specified and directed by Engr-in-charge.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-charge

S & F sheet metal enclosure powder painted for MCCB DB VTPN 08 way double door with MCCB incomer, IP-42 protection, Din rail and busbar complete all as specified and directed by Engr-in-charge.

Supply and fixing MCCB , 415V, 125 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 4 Sqmm drawn through PVC conduit/casing capping including accessories with 4 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessories with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed

S&F in replacement Ceiling fans, complete with three blade, anti-suicide down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor, Non-BLDC, power consumption not to exceed 40W, BEE 3 star rated as per latest BEE norms complete all as specified and directed by Engr-in-charge. Model: Havells ES40

Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 50 sqmm 3.5 core complete all as specified and directed

VACON INFRASTRUCTURES (BID ID -3352325)