GE 874/EWS-29/2023-24

Amount

BR and EM Portion

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed by Eng-in-charge.

Dismantling wall and ceiling boards ( fibre, pulp, insulation, etc) or insulation ards/slabs/blankets, any thickness including cover fillets. all as specified and directed by Eng-in-charge.

Dismantling boarding, any description, fixed in any position with nails all as specified and directed by Eng-in-charge.

Demolition of brick work built in cement mortar of any description.

Dismantling floor, hearth or wall tiles including cement mortar bedding complete.

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Taking down chowkats or frames with shutters (W/O taking off shutters ) exc 1.5 sqm but n exc 4 sqm each and removing from site.

Taking down chowkats with shutters (without taking off shutters from the frame) n exc. 1.50 sqm each & removing from site.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft / loose soil complete.

M&L for cement concrete Type D2 1:4:8 (40 mm graded graded graded graded in foundations, filling and mass concrete all as specified and directed.

Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete.

M & L for RCC type B-1, 1:2:4 (20 mm Graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified

M & L for RCC type B-1, 1:2:4 (20 mm Graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified

M & L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

M & L for TMT mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

M & L for 15 mm thick rendering on other fair faces of brick work or concrete surfaces in CM 1:6, rendering finishes even and smooth (without using extra cement) complete all as specified

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, on external wall finished even and fair mixer with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacture and in the propartion indicated all as specified

Supply only integral water proofing compound all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete.

M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in 75 mm thick sub base for floor finieshes all as specified and directed by Eng-in-Charge

M&L for Vitrified ceramic tiles dark coloured area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in flooring, set & jointed in neat cement slurry and pointed in white or colured cement to match over and including 15mm thick screed bed in CM 1:6 etc complete all as specified and directed.

M&L for non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, pointed in white or coloured cement to match thick as in flooring, set & jointed in neat cement slurry and pointed in white or colured cement to match over and incl 15mm thick screed bed in CM 1:6 etc complete all as specified and directed.

All as per item above but on vertical surface suck as skirting/daddo etc set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick in 1:4 cm backing coats etc complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Pre- painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L for Second class clean sawn soft-wood in scantlings unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.

M & L 2nd class soft wood wall paneling of good quality wood planed one side and edge tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall paneling 15 mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed. Note :- Frame work shall be measured & paid separately.

M&L for Dark/ Shade/ Double/ charged/ ultracharged colour virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles 0.42 sqm but not exceeding 1.00 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match in neat cement slurry and pointed in white or colured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for providing and fixing 6mm thick denmica ceiling decorative type sunk or raised designer to flat/curved surface over 2nd class soft wood scantling complete all asspecified and directed by Eng-in-Chagre. (Scantling shall be measured & paid separately under respective item).

M & L for 6mm thick plywood, grade BWR, type BB, fixed with screws to timber frame with nails complete all asspecified and directed work as in ceiling complete all as specified and directed by Eng-in-Charge

Providing and fixing factory made uPVC white colour Sliding window Three track area not exc 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (big series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if equired) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F for 12mm thick plain toughened glass fixed on aluminium frame with glass door handle(IGH-11),glass connector (IGC-1) , patch fittings & door closing(IPF-2), device & locks ( all are made of high grade stainless steel grade S.S.304 ( make of fitting:Insta)) including, iteching , carving as directed by Engineer -in -Charge.

S & F Flush shutters 35 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete.

S&F aluminium handles 150 mm size cast type, anodised complete

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete

S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

S&F 125 mm size stainless steel butt hinges, medium weight, cold rolled etc complete.

Dismantling stone slabs and tiles laid, bedded and pointed in any cement mortar of any description or thickness in floors, aprons etc.

S & F granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

S & F 4.8 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete.

S & F 4.8 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area exc 0.5 Sqm in each pane complete.

S & F 3 mm thick plain sheet glass ordinary quality and glazing with oil putty /wooden beads/rubber gasket in square area exc.n 0.5 Sqm in each pane complete.

S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Eng-in-Charge.

M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed

Fabrication & fitting in repair of modular kitchen with cabinet/ shelves & wardrobe/ cupboard made out of 18 mm thick PVC board plain colour & laminated sheet with piano hinges (sheet shall be laminated over PVC board with solvent adhesiv at external faces) including providing cabinet for keeping baskets/ cutlery basket with handles/ door shutters all as specified and directed NOTE : PVC sheet fittings & fixture will be measured and paid seperately as supply only.

Supply only 18 mm thick solid PVC board one side prelam sheet colour (Saluca sheet) of Make : Rajshree or equivalent all as specified and approved by Accepting Officer laminated with suitable cement solvent adhesive for shutter/ kitchen cabinet/ cup-boards/ partition wall/ wall cabinet and similar complete.

Supply only 100 mm size Double action spring brass, with phosphor bronze wire spring, bright polished hinges complete all as specified and directed.

Supply only 150 mm dia brass handles, cast type, polished bright finish complete all as specified and directed.

Vitreous china counter top wash and basin, oval type, of size 560mm x 410mm with chromium plated waste coupling long shank type, PVC waste pipe 32 mm bore 600mm long, fixed in repairs, complete all as specified and directed.

Vitreous china one peice European type water closet of size 700mm x 370mm x 760mm and making necessary connection to drain or out going pipe fixed on floor, fixed in repairs, complete all as specified and directed.

Central hole basin/sink mixer, 15mm bore, with popup waste, chromium plated, screwed down for galvanised iron pipes, fixed in repairs, complete all as specified and directed.

S & F in repair wall mixture, 15mm bore, chromium plated, screwed down for galvanised iron pipes, complete all as specified and directed.

S & F in repair chromium plated towel rack with lower hanger ,brass raling , including brass screw complete all as specified and directed.

S&F in repair brass chromium plated toilet paper holde complete all as specified and directed

S & F in repair chromium plated towel ring including brass screw complete all as specified and directed.

S & F in repair Chromium plated corner glass shelf with bracket and 6.3 mm sheet glass including circular cutting, grinding polishing & rounding edges of glass etc. complete all as specified and directed.

S & F for clean sawn 25mm thick 2nd class softwood with butt joints boarding, fixed with nails in any situation complete all as specified and directed

S&F in repairs PVC connection 600mm long with check nut etc complete all as specified

Grating round 100 mm dia of CP (minimum weight 100 gms) fixed in repair complete.

S & F stainless steel drappery or curtain rods, 25 mm dia, with end brackets, decorative type, cut to length as required size, colour coating including matching socketed brackets, complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store.

M&L for galvanised steel tubes medium grade 15 mm dia fixed to wall or ceiling or laid under floor, complete with necessary fittings all as specified and directed.

M&L for galvanised steel tubes medium grade 20 mm dia fixed to wall or ceiling or laid under floor, complete with necessary fittings all as specified and directed.

S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) complete all as specified and as directed.

M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.

M&L for complete removal of existing treatment plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed.

M&L for applying two coats of cement base paint over one coat of cement primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for preparing old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coat of cement base paint on wall surface complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Eng-in-Charge.

S & F in repair, sink with drainage board made out of stainless steel 1mm thick with plugs, washers and waste pipe including bedding in CM to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915mmx460mm bowl size 410mmx330mmxx160mm.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, Bracke sketch fitting, ceiling roses, lamp holders, brackets, pendants, regulators, sockets, light fitting etc. removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by EIC. Note:- The damaged surfaces to be made good with plastering (1:6). & applying colour wash in required coats to matching with existing surfaces as directed by Engineer-in-charge. Cost of the same deem to be included in quoted rates and nothing extra on this account admissible.

M & L for Modular point wiring for one light/one fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC concealed conduit ISI maked heavy duty for one light fan/bell point controlled by one switch including modular cover plate of suitable way matching with surrounding modular boxes with suitable size including PVC green insulated unsheathed 1.5 sqmm multistrand copper conductor FRLS cable as continous earthwire and connecting to earth duly, complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)

All as per item above but MODULAR call Bell point complete all as specified and directed.

All as per item above but MODULAR 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

All as per item above but MODULAR 3 pin 5 amps socket outlet on independent Board complete all as specified and directed.

All as per item above but MODULAR 15/16 Amps socket outlet on inependent board with 2.5 sqmm copper conducter FRLS cale and 2.5 sqmm PVC insulated unsheathed coper onductor cable FRLS (Green Colour) as earth lead complete all as specified and directed.

S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.

M & L for ceiling rose, PVC/Polycarbonate, insulated body, surface Bakelite 65mm dia three terminals all as specified and as directed.

S & F Modular switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular switch 1 way 16A, 1 module complete all as specified and directed.

S & F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular bell push 6 A, 1 Module, Complete all as specified and directed

S & F Bell AC,230 Volts, Single pole complete all as specified and directed by E-in-C.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F in replacement mirror light 10 Watt LED 2' length prewired with all accessories including lamp and connected electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor 3core cable of size 0.50Sqmm.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 7.5 W LED filament lamp complete with drivers, holders, x 7.5 W LED filament lamp LHFOAJD1TZ1I060 9405 including connecting up with three core flexible copper conductor cable of suitable size complete.

S & F LED smart Lamp, B22 type ,14 watt,complete all as specified and directed.

S&F 20W surface / wall mounted batten LED luminair, extruded aluminium housing with PC diffuser and ind electronic driver with high efficiency long life, CRI = 80 (Minimum), PF > 0.95, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, CCT (K) > 6500, THD < 10% complete including 20W LED tube rod with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directedories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete Make of LED Fitting:- CROMPTON DMLN1LT8-16 or Technocommercially equivalent to Philips/ GE.

S&F in replacement Energy saving, surface mounted, bulk head LED luminaire 10 W with PDC aluminium housing and polycarbonate diffuser with IP 66 protection complete including connecting up with three core twisted flexible copper conductor cable of suitable size.all as specified. Make :- CROMPTON CAT Part No. LBHP-10-CDL

M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.

S & F of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.

S&F MCB SP 240V, 50Hz, 10 KA, 'B' curve of rating 6 to 32 Amp all as specified and directed.

S&F MCB SPN 240V, 50Hz, 10 KA, 'B' curve of rating 6-32 Amp all as specified and directed.

M & L sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps complete all as spd and directed. Make:- Hager/ Legrand/ ABB

M&L for sub Main Wiring with 2 run of single core, 6 Sqmm FRLS PVC insulated and unsheathed, multi starndedcopper conductor cable using colour code for phase red and neutral black with and including 6 Sqmm FRLS PVC insulated and unsheathed copper conductor cable in green colour as earth conductor connected to common earth dolly, drawn in and including concealed PVC rigid conduit of suitable size having thickness not less than 1.8mm (ISI marked) with and including all accessories complete and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface including taking down of existing unserviceable surface/cocealed sub main wiring any type complete all as specified and directed. Note: Two run of submain wire (phase and neutral), and one run of earth including PVC conduit and accessories will be measured as one run.

S&F distridution board iron clad vertical DB double door with IP-43 protection and mechanical strength as IK-09 suitable for MCCB as incomer an MCB as outgoing 415V 3Phase 50Hz 4 Way complete with appropriate size of copper bus bar and neutral link complete with one MCB TPN 4 Pole 415V 100 Amps rating,16kA with adjustible thermal and adjustible magnetic release of the same make as of distribution board complete all as specified and directed. Note: (MCBs will be measured and paid saperately)

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.25 metre deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as showin in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150 mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40 mm thick RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregrate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including test on completion. (Note :- The rate quoted include cost of min 7.5 metre earthing wire)

Point wiring with 2.5sqmm copper conductor FRLS multi strand pvc insulated ISI marked unsheathed cable in PVC casing caping, med grade, ISI marked not less than 20mm dia with all fittings/accessories and also including PVC insulated ISI marked unsheathed 1.5sqmm copper stranded conductor as earth wire connected to common earth dolly and including sunk cast iron/pressed steel terminal junction boxes, junction boxes, other boxes made from 1.60mm thick sheet of suitable sizes for mounting of switches sockets, fan regulators, light fittings etc, covered with 3mm thick plastic laminated sheet (Make Hylum or equivalent ISI marked) for one 5pin 15/16 amps socket outlet independent or one power point by 15/16amp switch complete all as specified.

Switch socket combination,2in (multipurpose) 1, 3 pin, 5 and 15amps, flush type universal, 230volt, all as specified and directed.

Supply and lay M S Pipes of size 50 mm, heavy grade with all fittings laid in floors or fixed to walls and ceilings etc all as specified and directed by Engr-in-Charge.

Supply and lay M S Pipes of size 25 mm, heavy grade with all fittings laid in floors or fixed to walls and ceilings etc all as specified and directed by Engr-in-Charge.

M & L for Insulation of M S Pipe 50 mm with PUF slab 30 mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet complete all as specified and directed by Engr-in-Charge.

M & L for Insulation of M S Pipe 25 mm with PUF slab 30 mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet complete all as specified and directed by Engr-in-Charge.

3-layer PP-R P o l y p r o p y l e n e random copolymer) of size 15/16mm concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

Supply and fixing polyurethane pipe for hot water flow suitably connecting at inlet and outlet of FCU of size 16mmx12mm capable of of taking over 10 bar pressure ISI marked and temp 85 deg celsius all as specified and directed. Make K N K or as directed and specified.

Supply and fix air release valve (ARV) to automatically release trapped air from a heating system 20 mm dia. complete all as specified and as directed. Make - C&R/ kirloskar/ Zoloto.

Supply and fixing Nitrile foam insulation over CHS PPR Pipeline heating pipes, of size 3/4" ID X 1/2 " TK ( 19 mm x 13mm ) all as specified and directed .Make-Superlon/Sant.

Supply, Installation, Commissioning and testing of Nozzle Sets for inner units for FCU of make Western model No WFC-04/ WFC-3000, as per sample.

Supply, Installation, Commissioning and testing of Steel Rings for units pipe for FCU of make Western model No WFC-04/ WFC-3000, as per sample.

S&F Butterfly valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 50 mm complete all as specified and directed by Engr-in-Charge.

Supply, installation, testing and commissioning of Fan coil unit constructed out of 20 G Pre-coated GI, with 3 Rows Deep cooling coil 3/8" construction incl 12 mm thick pre - filter, DIDW Centrifugal blower with single phase direct driven motor and drain tray made out of sandwich type in 18G GI constructions with 25 mm PUF/ Thermocole insulation and 24 G GI covering complete of nominal capacity 1.5 TR all as specified and directed.

M/S SAJAA CONSTRUCTION COMAPNY

M/S MOHAMMAD JAMAL WANI

M/S AK CONSTRUCTION

M/S AB AHAD RATHER

M/S MYL CONSTRUCTION COMPANY

M/S MOHD YOUSUF CONSTRUCTION CO

M/S LONE CONSTRUCTION COMPANY

M/S ASMATULLAH SHAH

Bidder Name

M/S MOHAMMAD JAMAL WANI

M/S RJ BUILDERS

M/S AB AHAD RATHER

M/S SAJAA CONSTRUCTION COMAPNY

M/S ASMATULLAH SHAH

M/S AK CONSTRUCTION

M/S MOHD YOUSUF CONSTRUCTION CO

M/S LONE CONSTRUCTION COMPANY

M/S MYL CONSTRUCTION COMPANY