15th Finance commission 2025-26 (Tied) Ist Installment

Amount

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A (Sl.No.358)

Labour charges for removing the existing Damage Hand Pumpset including all labour charges etc. complete.

Charges for developing the bore well with air compressor of 300 cfm capacity including transportation, labour and fuel charge for compressor etc. and conducting yield test by ‘V’ notch method

Supply and delivery of wet type submersible pump set with a duty conditions of 15 lpm discharge against the head 90 suitable for 70mm dia bore well etc. complete.

Supply and delivery of wall mounting type control panel board suitable for 1.5 H.P pumpset including all tax etc. complete.

Labour charges for erection of 1.5 HP submersible pumpset in the bore well and erection of panel board laying and jointing of cable and testing the pumpset etc. complete

Supply and delivery of HDPE tank of capacity 1000 liters.

Supply and delivery of submersible pumpset having a duty condition of 200 lpm discharge against the head of 75M confirming to IS specification with ISI marking suitable for installation in open well

Supply and delivery of wall mounting type control panel board Star Delta Starter with two level guard suitable for 10 H.P pumpset

Labour charges for erection of 10 HP submersible pumpset in the bore well and erection of panel board laying and jointing of cable and testing the pumpset etc. complete

Supply and delivery of following PVC/ GI Pipes and Specials. 65mm U PVC Column Pipe

65mm M.S Clamp set

65mm Sub Adopter

32mm U PVC Pipe

32mm C.I Sub Adopter

32mm GM Gate valve

32mm GM N.R. Valve

32mm G.I Pipe Nipple

MS Bore cover

32 mm MS Clamp

32mm G.I Pipe 'B' Class

32mm G.I Hex Nipple

32mm G.I Coupling

32mm G.I Elbow

32mm G.I Union

32mm G.I Bend

40mm PVC Pipe 10KSC

40mm PVC Th. Adopter

40mm PVC Bend

32mm CPVC Tank Connector

32mm PVC Pipe 10KSC

32mm PVC Elbow

25mm PVC Pipe 10 KSC

25mm PVC Elbow

25mm GM Ball valve

20mm Tank Connector

20mm G.I Pipe Nipple

20mm G.I Coupling

20mm Tap

2.5Sq. mm Submersible Cable

4 Sq. mm Submersible Cable

Nylon Rope

7/20 Cable wire

Earth work excavation and depositing on bank with an initial lead and lift in all soils for narrow trench cutting ietc. for pipe line work

Refilling or backfilling trenches with excavated soil after pipe laying in layers not exceeding 20 cm in depth, ramming and consolidation of each layer, watering etc. all complete as per standard specifications and as directed by the Departmental Enginee.

Supply and fixing of TNEB meter board suitable for 32 A single Phase service connection with fuse unit neutral link and earth link and TW plank on wall with earth connection and inner connection with 7/20 PVC insulated copper wire from E.D meter to fuse unit (SD 125)

Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour (SD 58)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil) (SD 20)

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD 234)

Supply and fixing of 32A DP switch of 500V with metal clad with fuse and neutral (side handle) on suitable TW board with earth connection only (SD 144)

Labour charges for fixing of HDPE tank of capacity 1000 liters as per standard specification.

Labour charges the providing inlet, outlet, scour, overflow pipe and tap connection to the HDPE tank as per standard specification

Labour charges for Fixing of Gate Valve in proper grade and alignment etc. complete.

Earth work excavation and depositing an bank with an initial lead and lift in all soils for foundation

Plain cement concrete 1:3:6 mix using 40mm ISS metal including all cost and conveyance etc. Complete.

Plain cement concrete 1:2:4 mix using 20mm ISS metal including all cost and conveyance of all materials etc. Complete.

Brick works in cm 1:5, using country burnt bricks including its cost and conveyance of materials etc. Complete.

Supply and Delivery of Steel rods

Centering for soffits of reinforced cement concrfete slabs or plain surface including strutting upto 3M ht. using MS sheet of size 90m x 60cm x and BG 10 gauge stiffened with welded MS angles of size 25mm x 2mm x 3mm laid over sliver oak (country wood) joints of 10cm x 6.5cm spaced at about 90cm c/c and supported by Casurina props of 10cm to 13cm dia. At 75cm c/c complying with standard specification and as directed by the department

Supply and fixing of RCC precast slab in cement concrete 1:2:4 mix ( One cement two sand four aggregate ) using 20mm ISS metal including cost of moulding charges mixing laying and curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification but excluding cost of rein forcement (150mm)

Plastering with c.m 1:5, 12mm thick including its cost and conveyance of materials etc. Complete.

Supply, fabricating & fixing in position of M.S door of size 1.20 x 0.90m. The outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications.

Painting two coats over new iron work with ready mixed paint of apprved quality and colour including cost of all materials and labour charges etc complete as per SS

Special Design Art work with first class Quality enamel paint including wall putty ,priming coat etc… complete other incidentiial charges if any as per standared specification Asume for 100 Sq.ft

SAHAYA THAYTHEYOUSH (BID ID -1433733)