Converting existing store at basement to kitchen with SS Cabinets other allied works at Raj Niwas under AE II, PBSD, APWD, Port Blair

Amount

Reinforced cement concrete work in beams, suspended foors, roofs having slope up to 15* landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to foor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

12 mm cement plaster of mix :

1:4 (1 cement: 4 fine sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

25 mm nominal dia Pipes

50 mm nominal dia Pipes

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Two coats

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying hollow cement concrete block walling upto floor five level 200mm thick consisting of hollow block of size 400x200x200mm of mix 1:3:6(1 :cement 3 :coarse sand 6 :graded stone aggregate 10mm nominal and down size) having a crushing strength of 3.5N/sqmm at 28 days as per IS:2185 (part-I) 1979 laid in cement mortar 1:6(1 :cement 6 :coarse sand) upto floor five level.

Providing and fixingUPVC (SWR) soil, waste and vent pipe (6 kg/Sqm)

110 mm dia

Providing and fixing UPVC moulded door bend of required degree for upvc soil pipes conforming to IS: 13592 type (B ) i/c jointing with solvent.

Providing and fixing UPVC (SWR) plain bend of required degree (6kg/Sqm)

Providing and fixing complementary angle valve in F gold K-80158IN-9-AF of make Kohler as per direction of engineer-in-charge.

Providing and fixing linear floor drain in polished chrome product code K-97739T-NA of make Kohler as per direction of engineer-in-charge.

Providing and fixing Kumin single Handle Wm kitchen mixer 99483 IN-4-CP of make Kohler as per direction of engineer-in-charge.

Providing and fixing SS (grade 316) kitchen cabinet of size 2400x600x850+150mm, top of the cabinet made up of 16 G, door/drawers at front side made of 18G and three side cover made of 22G and U/S made of 18G, CNC cutting, bending, TIG welding 5 stages of matt finish including SS (grade 304) soft close telescopic sliders, Handles & 13 Nos SS kitchen baskets of size 480x505x200/150/100 mm for cup & Saucers, Cutleries, Thali & plain baskets of make Hafele/ Sleek or equivalent and SS handles and the cabinets should be connected with SS bolts or welding as directed and approved by Engineer in Charge. (CABINET NO. 1)

Providing and fixing SS (grade 316) kitchen cabinet with sink splash and double layer plate rack of size 2400x600x850+600mm, sink size 1200x450x300mm made of 1.5 mm thick plate top of the cabinet made up of 16 G, door/drawers at front side made of 18G and three side cover made of 22G and U/S made of 18G, required number of doors as per the stability requirements and adjust of door moulded property and the doors fixed with SS butt hinges, SS Handles, splash extended upto 600 mm above cabinet top02 Nos plate rack fixed one above other with 30cm distance between them CNC cutting, bending, TIG welding 5 stages of matt finish and the cabinet should be connected with SS bolts or weldings as directed and approved by Engineer in Charge. (CABINET NO. 2)

Providing and fixing SS (grade 316) kitchen cabinet of size 2400x600x850+150mm, top of the cabinet made up of 16 G, door/drawers at front side made of 18G and three side cover made of 22G and U/S made of 18G, CNC cutting, bending, TIG welding 5 stages of matt finish including SS (grade 304) soft close telescopic sliders handles & 05 Nos SS kitchen baskets of size 480x505x200/150/100 mm for cup & Saucers cutleries bottle pull out and plain baskets of make Hafele/sleek or equivalent and 08 Nos doors of required size beneath drawers and all fixed with Ss bullets hinges and the cabinets should be connected with SS bolts or welding as directed and approved by Engineer in Charge. (CABINET NO. 3)

Providing and fixing SS (grade 316) kitchen cabinet of size 2400x600x850+150mm, top of the cabinet made up of 16 G, door/drawers at front side made of 18G and three side cover made of 22G and U/S made of 18G, CNC cutting, bending, TIG welding 5 stages of matt finish including SS (grade 304) soft close telescopic sliders handles &12 Nos SS kitchen baskets of size 480x505x200/150/100 mm for cup & Saucers cutleries, Thali bottle pull out and plain baskets of make Hafele/sleek or equivalent and SS handles and the cabinets should be connected with SS bolts or welding as connected as directed and approved by Engineer in Charge. (CABINET NO. 4)

Providing and fixing SS (grade 316) kitchen cabinet of size 2400x600x850+150mm, top of the cabinet made up of 16 G, door/drawers at front side made of 18G and three side cover made of 22G and U/S made of 18G, CNC cutting, bending, TIG welding 5 stages of matt finish front side area equally devided into 08 Nos doors and all fixed with SS bullet hinges and SS Handles as directed and approved by Engineer in Charge. (CABINET NO. 5)

Providing and fixing SS (grade 316) kitchen cabinet of size 1819x600x850+150mm, top of the cabinet made up of 16 G, door/drawers at front side made of 18G and three sides cover made of 22G and U/S made of 18G, CNC cutting, bending, TIG welding 5 stages of matt finish. Including SS (grade 304) soft close Telescopic sliders, Handles & 13 Nos SS Kitchen baskets of size 480x505x150mm for Cup & Saucers, Cutleries, Thali & plain baskets of make Hafele / sleek or equivalent and SS Handles and the cabinets should be connected with SS Bolts or welding as directed and approved by Engineer-in-Charge. (CABINET NO. 6 &7)

Providing and fixing SS (grade 316) kitchen Wall cabinet of size 2400x400x600, top of the cabinet, door at front side and three sides cover and U/S made of 1 mm thick plate, CNC cutting, bending, TIG welding 5 stages of matt finish. Front side area equally divided in to 08 nos doors and all fixed with SS bullet hinges and SS Handles and the cabinets to be fixed to the wall necessary boths and fasters as directed and approved by Engineer-in-Charge.(CABINET NO. 8)

Providing and fixing extra corner SS 316 Sheet (600x600 mm)

ANAND TRADERS AND CONSTRUCTION (BID ID -44653)