Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.0 Cr
EMD Value
₹5.4 L
Closing Date
27 Feb 2024, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
Shanthala.J.G
Construction of Government Industrial Training Institute Building at Karkala in Udupi District
PWD/2023-24/BD/WORK_INDENT7742
PWD/2023-24/BD/WORK_INDENT7742
Open
Buildings
Two Tender Document System(Two Cover)
PWD Division Office Udupi
4 documents required · 4 mandatory
Section 2: ITT 3.2 - To qualify for award of this contract, each Tenderer in its name should have in the last five years (b) Satisfactorily completed as prime contractor, at least (i.e. 2018-19 to 2022-23 )one similar work such as Building construction work of value not less than Rs 179.08Lakhs
Executed in any one year the following minimum quantities of work (Earth Work Excavation in 1.Hard Soil With Blasting -1391Cum,2. Earth Work Excavation in all Kinds Of Soil -380Cum, 3.PCC / RCC Concrete -887 Cum, 4.Solid Blocks/ BBM/ Latrite Masonary-693 Sqm,5. TMT Steel Reinforcement -50 Tonne, 6.Plastering -4859Sqm, 7.Granite/Vitrified/Ceramic Flooring and Cladding -1175Sqm .
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical Building works of Rs. 13.00lakhs (not less than 50% of electrical works) n any one year)
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar water supply/ sanitary for Buildings works totallng Rs.5.80lkhs(not less than 50% of water supply/sanitary engineering works) n any one year.
Section 2: ITT 3.3 - Each Tenderer should further demonstrate: (b) Machineries could be on Lease/Hire/Ownership:1.Self Loaded Concrete mixer-1 No, 2.Excavator / JCB -1 No, 3.Tipper -3 Nos, 4.Water Tank -5000 liters Capacity -1 No, 5.Self operating lift -1 No,6.Steel Centering/ Scaffolding Materials -500sqm.
List of works for which tenders already submitted
Section 2: ITT 3.3 Each Tenderer should further demonstrate: (a) Machineries to be owned:1.Concrete mixture machine -2 Nos, 2.Self Loaded Concrete mixer -1 No, 3.Excavator / JCB -1 No, 4.Tipper -2 Nos,5. Water Tank -5,000 liters Capacity-1 No,6. Steel Centering/ Scaffolding Materials -500sqm.
The bidder should be a Class-II and Above KPWD contractor.
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Section 2: ITT 3.2 - To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2018-19 to 2022-23 ) (a) achieved in atleast two financial year, a minimum financial turn over (in all classes of civil engineering construction works only) of Rs 716.35 Lakhs.
Section 2: ITT 3.3 - Each Tenderer should further demonstrate : (b) Liquid assets and /or availability of credit facilities of no less than Rs. 107.45 Lakhs (Credit lines/ letter of credit/ certificates from nationalized / scheduled banks in prescribed format for meeting the fund requirement etc.
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of Financial Resources with Certificates
List of existing commitments and ongoing works
Banker Details for reference
₹5,000
₹5.4 L
12 Feb 2024
12 Feb 2024
29 Feb 2024
22 Feb 2024
22 Feb 2024
Construction of Government Industrial Training Institute Building at Karkala in Udupi District - Ground Floor A Block
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and fixing in position 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 600 mm. Long and at 300 mm. C/C and wherever directed including handling, straightening, ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundationsand other similar works etc. in layers not exceeding 20cm in depth, consolidatingeach deposited layer by ramming and wa...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door frame t...
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approvedmake in all colours, shades except burgundy, bottle gree...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corner...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
(S.R.I.No.12.58, P.105, Vol-2 PWD SR 2023-24)
---- including cost and...
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250 x 10mm
---- including ...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)
---- including...
Providing and fixing bright finished brass handles with screws etc. complete: Brass handles 125 mm with plate 175x32 mm
(S.R.I.No.12.79.1 P.108, Vol-2 PWD SR 2023-24)
---- including ...
Construction of Government Industrial Training Institute Building at Karkala in Udupi District - First Floor A Block
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/...
Construction of Government Industrial Training Institute Building at Karkala in Udupi District - Ground Floor B Block
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and fixing in position 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 600 mm. Long and at 300 mm. C/C and wherever directed including handling, straightening, ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundationsand other similar works etc. in layers not exceeding 20cm in depth, consolidatingeach deposited layer by ramming and wa...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door frame t...
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free wit...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing & fixing of 3track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) ...
Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of nea...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing 15 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
(S.R.I.No.12.58, P.105, Vol-2 PWD SR 2023-24)
---- including cost and...
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250 x 10mm
---- including ...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)
---- including...
Providing and fixing bright finished brass handles with screws etc. complete: Brass handles 125 mm with plate 175x32 mm
(S.R.I.No.12.79.1 P.108, Vol-2 PWD SR 2023-24)
---- including ...
Construction of Government Industrial Training Institute Building at Karkala in Udupi District - First Floor B Block
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/...
Construction of Government Industrial Training Institute Building at Karkala in Udupi District - Sanitary and water supply works
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS w...
Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS w...
Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS w...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing brass bib cock of approved quality : 20mm nominal bore
(S.R.I.No.13.2.2 P.117, Vol-2 PWD SR 2023-24)
---- including cost and conveyance of all materials with all...
Providing and fixing brass bib stop of approved quality : 20mm nominal bore
(S.R.I.No.13.3.2 P.117, Vol-2 PWD SR 2023-24)
---- including cost and conveyance of all materials with all...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
(S.R.I.No.13.4.2 P.117, Vol-2 PWD SR 2023-24)
---- including cost...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
(S.R.I.No.14.22A P.135, Vol-2 PWD SR 2023-24)
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with ...
Providing and fixing 100 mm sand cast Iron grating for gully trap.
(S.R.I.No.14.29 P.136, Vol-2 PWD SR 2023-24)
---- including cost and conveyance of all materials with all lead and ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Detailed Sub Estimate for Providing to Govt. Industrial Training Institute Building at Karkala Town, Udupi District
Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The...
Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The...
Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The...
Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...
Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...
Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...
Supplying and fixing PVC/metal conduit Deep junction box. ( COMMON Electrical SR of 2023-24, Part - III , Utilization ( PWD Electrical ) )
19/20 mm deep Junction box
---- including cost and conveyanc...
Supplying and fixing PVC/metal conduit Deep junction box. ( COMMON Electrical SR of 2023-24, Part - III , Utilization ( PWD Electrical ) )
25 mm deep Junction box
---- including cost and conveyance o...
Supplying And Fixing Metal Fan Box with Round Hook.( COMMON Electrical SR of 2023-24, Part - III , Utilization ( PWD Electrical ) )
---- including cost and conveyance of all materials with all lead a...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Wires and Cables-Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1...
Wires and Cables-Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1...
Wires and Cables-Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.( COMMON Electrical SR of 2023-24, Pa...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.( COMMON Electrical SR of 2023-24, Pa...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.( COMMON Electrical SR of 2023-24, Pa...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.( COMMON Electrical SR of 2023-24, Pa...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.( COMMON Electrical SR of 2023-24, Pa...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.( COMMON Electrical SR of 2023-24, Pa...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
CONTROL SWITCH GEARS & ACCESSORIES
Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution,( COMMON Electrical ...
Fixing of . A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling,( COMMON Electrical SR of 2023-24, P...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C. ( COMMON Electrical SR of 2023-24, Part - III , Utilization ( PWD Electri...
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.( COMMON Electrical SR of 2023-24, Part - III , Utilization ( PWD Electrical ) )
Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...
Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.( C...
Supplying of .feet PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power facto...
Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance...
Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powdercoated prewired to mains connector & has swivel...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuserwith Injection moulded polyca...
Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.( COMMON Electrical SR of 2023-24, Part - III , Utilizati...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu...
Supplying and Fixing.mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light ...
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...
Extra length of GI pipe of class B 19mm dia for down rod.( COMMON Electrical SR of 2023-24, Part - III , Utilization ( PWD Electrical ) )
---- including cost and conveyance of all materials with all ...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.( COMMON...
Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.( COMM...
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.( COMMON Electrical SR of 2023-24, Part - III , Utilization ( PWD Electrical ) )
Grounding of Towers/Equipments
a) Grounding of towers including cost of 40mm dia 2.5 mm thick, class C G.I. Pipe of 3 Mtrs length as per specifications, with 50X6 mm GI Flats 3 Mtr long, salt charcoal...
Grounding of Towers/Equipments
a) Grounding of towers including cost of 40mm dia 2.5 mm thick, class C G.I. Pipe of 3 Mtrs length as per specifications, with 50X6 mm GI Flats 3 Mtr long, salt charcoal...
Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to theearthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connec...
Supplying of 1.1 KV ,XLPE or Heat reisistant PVC insulated , PVC extrusted inner seath Armored , LTUG Cable as per IS-1554 ( Part-1) or IS-7098 Part-1 Armouring strip thickness and resistively as per ...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Laying of cable in existing Trench / GI Pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminium Rollers as directed by the departmental staff,.
LT Cable -35 to 95 Sqmm
---- including cost and conveyance...
GI Pipe B-Class as per IS 1239
GI Pipe -65 mm Dia
---- including cost and conveyance of all materials with all lead and lift, loading and unloading, usage of Machinery and equipments, transportation ...
Supplying of Cable gland ,.( COMMON Electrical SR of 2023-24, Part - III , Utilization ( PWD Electrical ) )
---- including cost and conveyance of all materials with all lead and lift, loading an...
Supplying of Haevy Duty Copper Terminal Long Barrel,.
35 Sqmm Copper Terminal, Apprx Wt: 17 Gm
---- including cost and conveyance of all materials with all lead and lift, loading and unloading, usage...
Supplying of Haevy Duty Copper Terminal Long Barrel,.70 Sqmm Copper Terminal, Apprx Wt: 38 Gm
---- including cost and conveyance of all materials with all lead and lift, loading and unloading, usage ...
Supplying of Distribution Transformer- Phase, 11 KV / 433 Volts, Stacked CRGO Core with Oil.( COMMON Electrical SR 2022-22 )
A. OPEN BUSHING TYPE. D) 63 kVA,Aluminium Wdg. Star 2 ( 5 Star)
Line Supports ( Pole)
RCC Pole - 9 Mtr Long, 145 Kg WL.( Dwg No. BESCOM / GM /QS&S /02 Dated 24.11.2028) as per IS-785 ) ( COMMON Electrical SR BESCOM 2023-24, 11 KV System ) )
---- including cost an...
Spplying and errection of Double pole Transformer Structure conplete with cross arms , braces, clamps, bolts 7 nuts and washers including 2 Nos of poles.( COMMON Electrical SR BESCOM 2023-24, 11 KV Sy...
Cross Arms ( MS & GI ) as per IS-1977.( COMMON Electrical SR BESCOM 2023-24, 11 KV System ) )
11 kV Horizontal cross arm with Galvanized Iron ( GI)
---- including cost and conveyance of all materials...
Cross Arms ( MS & GI ) as per IS-1977.( COMMON Electrical SR BESCOM 2023-24, 11 KV System ) )
11 KV Special 3 Pin Cross Arm-GI
---- including cost and conveyance of all materials with all lead and li...
Cross Arms ( MS & GI ) as per IS-1977.( COMMON Electrical SR BESCOM 2023-24, 11 KV System ) )
4 Pin Cross Arm- GI
---- including cost and conveyance of all materials with all lead and lift, loading ...
Cross Arms ( MS & GI ) as per IS-1977.( COMMON Electrical SR BESCOM 2023-24, 11 KV System ) )
ltst Support 50x6 Flat-GI
---- including cost and conveyance of all materials with all lead and lift, loa...
Cross Arms ( MS & GI ) as per IS-1977.( COMMON Electrical SR BESCOM 2023-24, 11 KV System ) )
HTST Support 50 x 8 mm Flat -GI
---- including cost and conveyance of all materials with all lead and lif...
Cross Arms ( MS & GI ) as per IS-1977.( COMMON Electrical SR BESCOM 2023-24, 11 KV System ) Spiral Earth Electrode
---- including cost and conveyance of all materials with all lead and lift, loading ...
Insulator as per IS- 1445 for Ceramic, IS-7935 for GI Pin ,IEC -61109 for Polymeric.( COMMON Electrical SR BESCOM 2023-24, 11 KV System ) )
11 KV Ceramic Pin Insulator ( Shell only)
---- including co...
Insulator as per IS- 1445 for Ceramic, IS-7935 for GI Pin ,IEC -61109 for Polymeric.( COMMON Electrical SR BESCOM 2023-24, 11 KV System ) )
11KV , 45 KN Polymeric Insulator
---- including cost and c...
ACSR Conductor as per IS- 398 ( Part- 2/1996)
Rabbit ACSR Conductor ( 6/3.35 mm Al+ 1/3.35 St) Sted Wl. 214 Kg / KM( COMMON Electrical SR BESCOM 2023-24, 11 KV System ) )
---- including cost and conv...
GOS as per IS- 9921 , is -1977
11 KV , 200 Amps Single Break GOS ( Dwg No, 200 Amps Single Break GOS ( Dwg No.BESCOM / GM /QS&S /23 Dtd 24.11.2018 0( COMMON Electrical SR BESCOM 2023-24, 11 KV System ...
DOLO Cut out as per IS-9385 , Part -1 to 3
11 KV ,DOLO Cut out Conventional to Erst while KEB Specification.( COMMON Electrical SR BESCOM 2023-24, 11 KV System ) )
---- including cost and conveyance...
L T Protection Kit
LT Protection Kit ( Dwg No. BESCOM/GM/QS&S/10 Dated 24.11.2018)( COMMON Electrical SR BESCOM 2023-24, 11 KV System ) )
---- including cost and conveyance of all materials with all ...
LT Distribution Box as per IS-13947 Part-1 & 2.
LT Distribution Box for 100 KVA DTC with MCCB'S ( Sheet metal).( Dwg No. BESCOM/GM/QS&S/58 Dated 24.11.2018))( COMMON Electrical SR BESCOM 2023-24, Labo...
9 KV , 5 KA Lightning Arrestor Metal Oxide Ceramic type with Ground Disconnector.( Dwg No. BESCOM/GM/QS&S/26 Dated 24.11.2018)( COMMON Electrical SR BESCOM 2023-24, Labour -11 KV System ) )
11 kv , HG Fuse Unit with Solid Core Insulator.( Dwg No. BESCOM/GM/QS&S/21 Dated 24.11.2018))( COMMON Electrical SR BESCOM 2023-24, Labour -11 KV System ) )
---- including cost and conveyance of all ...
Double pole TC Set for Errection of Transformer on RCC /PSCC 9 Mtr Long Poles as per IS-1977.)( COMMON Electrical SR BESCOM 2023-24, Labour -11 KV System ) )
For 25/63/100 KVA 4/5 Star Rated Transform...
Errection of RCC /PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr Depth.( COMMON Electrical SR BESCOM 2023-24, Labour 11 KV System ) )
---- including cost and conveyance of all materials with all l...
Errection of Double Pole Transformer Structure using 9 mtr Long RCC ( 145 Kg WL) /PSCC ( 300 Kg WL) Pole including fixing of structure Materials , Errection of poles etc., complete for mounting of Tra...
Errection of Transformer & Structures.( COMMON Electrical SR BESCOM 2023-24, Labour 11 KV System ) )
Errection of 25 to 63 KVA Transformer.( COMMON Electrical SR BESCOM 2023-24, Labour 11 KV System ) ...
Fixing of DOLO , GOS , LA, FUSE Board, Service Mains, Spacer, Insulator etc., ( COMMON Electrical SR BESCOM 2023-24, Labour 11 KV System ) )
Fixing of DOLO CUT OUT / Horn Gap Fuse including fixing of ...
Fixing of GOS including wiring ( 11 KV Single Break 200 Amps).( COMMON Electrical SR BESCOM 2023-24, Labour 11 KV System ) )
---- including cost and conveyance of all materials with all lead and lift...
Fixing of 3 Nos Lightning Arrestor including wiring.( COMMON Electrical SR BESCOM 2023-24, Labour 11 KV System ) )
---- including cost and conveyance of all materials with all lead and lift, loading ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
ITI Karkala bid document 7742.doc
Tender Document • 0.29 MB
GST declaration.pdf
Instructions to Tenderers • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .