TP1-24/2025-26 OF CE/TP-I/CNI

Amount

Earth work excavation for foundation including all labour charges including initial lead, lift, etc. complete.

Labour charges for Dismantling of PCC at the time of earthwork excavation if any including cost of all T&P's, lead, lift, etc., complete.

Labour charges for Dismantling of RCC at the time of earthwork excavation if any including cost of all T&P's, lead, lift, etc., complete.

Labour charges for Dismantling of Brickwork at the time of earthwork excavation if any including cost of all T&P's, lead, lift, etc., complete.

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the building using BIFLEX-C termite 250ml for 10lit of water etc. complete.

Providing shoring and strutting using CW planks duing EW excavation and concreting including cost of all materials labour lead and lifts etc complete

Labour charges for dewatering at the time of earthwork excavation if any including cost of all T&P's, lead, lift, etc., complete.

Supplying and filling river sand for foundation including cost of sand, all labour, lead,lift, consolidation etc. complete.

Plain cement concrete 1:3:6, using 20 mm HBG metal for foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete.

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, with form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Column Footings & Grade Beam concrete.

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. - Cable Duct Side wall

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. - Column (below F.G.L).

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Plinth beam concrete.

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Coloumn. Upto Ground floor roof

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Coloumn. First floor

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Coloumn. Second floor

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Coloumn. Head Room

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Continuous lintel & StairCase concrete. Ground floor

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Continuous lintel & StairCase concrete. First floor

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Continuous lintel & StairCase concrete. Head Room

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Sunshade concrete 6cm projected, 8mm Tk. at wall and 50mm Tk. at free end. Ground floor

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Sunshade concrete 6cm projected, 8mm Tk. at wall and 50mm Tk. at free end. First floor

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Sunshade concrete 6cm projected, 8mm Tk. at wall and 50mm Tk. at free end. second floor

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Sunshade concrete 6cm projected, 8mm Tk. at wall and 50mm Tk. at free end. Head Room

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof Beam concrete. Ground floor

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof Beam concrete. First floor

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof Beam concrete. Second floor

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof Beam concrete. Head Room

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete 130mm Tk. Ground floor

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete 130mm Tk. First floor

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete 130mm Tk. Second floor

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete 130mm Tk. Head Room

RCC M30 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For precast cover slab concrete.

Providing steel reinforcement for RCC works including cost of steel rod binding wire and placing in postion of the steel reinforcement all materials, lead and lift etc., complete.

Brick work in CM 1:5 using fly ash bricks for basement & ground floor super structure, including cost of all materials, all labour charges, lead, lift, etc. complete. Ground floor

Brick work in CM 1:5 using fly ash bricks for basement & ground floor super structure, including cost of all materials, all labour charges, lead, lift, etc. complete. First floor

Brick work in CM 1:5 using fly ash bricks for basement & ground floor super structure, including cost of all materials, all labour charges, lead, lift, etc. complete. Second floor

Brick work in CM 1:5 using fly ash bricks for basement & ground floor super structure, including cost of all materials, all labour charges, lead, lift, etc. complete. Head Room

Brick work in CM 1:3 using fly ash bricks for partition wall, including cost of all materials, all labour charges, lead, lift, etc. complete.

Plastering with cm 1:5, 12mm thick for walls including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Plastering with cm 1:3, 12mm thick for ceiling, beams, sunshade including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Providing and laying white cooling tiles 300x300 size over screed concrete 1:3:6 with average thickness of 25mm for required gradient and using best quality of one course of weather proof tiles of approved quality using CM 1:3, 12mm thick and using 3mm spacer and pointing with water repellent U bond and grout inclusing cost of all materials, transport, curing, etc., complete.

Damp proof course using cement mortar 1:4 20mm thick with water proofing compound including cost of all materials lead lift etc., complete.

Painting two coats with approved quantity White distember for priming coat, for interior and surfaces including cleaning the plastered surface, cost of all materials, labour, lead, lift, T&P, etc. complete.

Painting the inside walls with two coats of best quality interior emulsion of approved colour over a primer coat of all materials, etc., complete.

Painting the outside walls with two coats of exterior emulsion over a primer coat of approved colour and quality including cost of all matreials, lead and lift etc., complete.

Painting with approved quality of acid proof paint, over one coat of primer, over plastered wall surface in battery room including cost of all materials, labour, lead & lift, etc., complete.

Flooring with Eurocon tiles 20mm Tk. For portico including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Providing and laying in position of ceramic acid resistant tiles over a bed of 20mm thick CM1:3 including pointig with acid resistant C.M for flooring in battery room, including cost of all materials, Polishing, labour, lead, & lift, etc., complete.

Flooring with approved spartec ceramic non-slippery tiles 300x300mm size of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete

Flooring with approved vertified tiles 600x600mm of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete.

Dadooding walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface , including cost of all materials, labour, lead, lift, etc. complete.

Fabrication supply and fixing in position of anodized aluminium double leaf glazed door with hydralic floor floor spring using ' AJITH / JINDAL' make standard aluminium sections medium grade with 6mm thick plain glass shutters of standard size of rails and styles including cost of locking arrangements handles and all materials,labour, lead and lift etc., complete.(Bottom rail -100x45mm, top and outer frame -65x40mm, shutters frame- 45x45mm)

Fabrication supply and fixing in position of anodized aluminium single leaf glazed door with hydralic floor floor spring using ' AJITH / JINDAL' make standard aluminium sections medium grade , top half panelled with 6mm thick plain glass shutters of standard size and bottom half panelled with 12mm thick Novapan Sheet both sides laminated doors and revolving type including cost of locking arrangements handles and all materials,labour, lead and lift etc., complete.(Bottom rail -100x45mm, top and outer frame -65x40mm, shutters frame- 45x45mm)

Supply and fixng of PVC door of required size with PVC frame and shutters of approved make and colour including cost of all furnitures labuor,etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyviny Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Fixed & Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The ventilators have provisions for fixing exhaust fan of suitable size. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying and fixing MS grills for windows and ventilators using 18x5mm MS Flat and square rods as directed by the Engineer at site including painting two coats with enamel paint over a coat of primer cost of materials, labour, lead and lift etc., complete.

Supplying and fixing of rolling shutter using 18 swg Tata steel MS sheet with gear operation including locking arrangements on both sides , top hood, guides,gear arrangements ,2Nos godrej navtal locks seven lever, handles, applying metel primer one coat etc.complete as per standard specification.

Supplying and fixing in position IWC ORIYA PAN of size 580X420mm white glazed earthen ware of approved make & quality with 'P' or 'S' trap conforming to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forming flooring around the cloast using 40mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, T&P, etc. complete.

Supplying and fixing in position White glazed Flat back urinal - Size 455 x 350mm of approved make and quality [Parryware -Aquaseal urinal or equivalent] and with PVC pipe connection [Kohinoor], 32mm PVC waste pipe [Kohinoor], 12/15mm GM wheel valve ISI, fixing the urinal to the valve with necessary TW plugs, brass screws etc, connecting to the water main as directed at site including the cost of all materials abour, lead, lift, T&P etc. complete.

Supply and fixing of wash basin of size 560x410mm white colour and of approved quality and make[Parryware or equivalent] with 12/15mm dia brass CP pillar tap [waterman], 32mm PVC waste pipe [Kohinoor], 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection [Kohinoor] etc. fixing the basine in the wall with GI/Alu. brackets, giving necessary water connection etc., and mirror with beveled edge fixed with suitable CP brass screws etc., complete.

Supplying and filling at 100mm dia, best quality ventilating shaft 3.65m height with PVC cowl at top and fixing in poistion inlcuding cost of all materials, curing labour, leads and lits etc., complete.

Supplying and fixing in position 110mm dia PVC soil pipe- 6kg/sq.cm [Finolex or equivalent] with special clamps & PVC shoe at bottom including the cost of all materials, labour, lead, lift, T&P, etc., complete

Supplying and filling with 40mm HBG metal in dispersion trench, rain water harvesting pit including cost of metal, all labour, lead,lift, consolidation etc. complete.

Supply and fixing 100mm PVC down fall pipe 4kg/cm2 avonplast or Finolex make with required bend, tee including cost of materials, labour, lead and lift etc., complete.

Providing and laying PVC high density pipe including cost of all materials, labour, etc., complete. 32MM DIA PVC PIPE

Providing and laying PVC high density pipe including cost of all materials, labour, etc., complete. 25MM DIA PVC PIPE

Providing and laying PVC high density pipe including cost of all materials, labour, etc., complete. 20MM DIA PVC PIPE

Providing and fixing wheel valve of various diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete. 32MM DIA

Providing and fixing wheel valve of various diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete. 25MM DIA

Providing and fixing wheel valve of various diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete. 20MM DIA

Providing and fixing of long body chromium coated metal tap of 12mm size including cost of all materials, labour, etc., complete.

Supplying ad fixing of 20mm dia PVC Pillar Tap including cutting, Threading, Pasting of Tee joint, elbow, cost of all materials, labour, lead & lift etc., Complete as directed by the engineer incharge at site.

Supplying and fixing in position aluminium partition partly glazed & partly paneled above 12mm thick both side prelaminated boards [ Novanpan or Equivalent] and 5mm thick machine frosted float glass 9modi, saint gobine or Equivalent0 using aluminium box section of not less than 63x38.4x2mm x 1.174kg/m for vertical @ 955mm c/c approx and horizantals[4Nos] including cost of all materials, labour, lead, liftT&P etc. complete.

Fabrication,Supplying and fixing in position of steel ladder including painting with two coat primer welding, cost of all materials, labour, lead and lift etc., complete.

Supply and fixng of man hole CI cover(600x600 size)

Fabrication & erection of Name Board of vinyal sticker laminated in alco panel using 18 gauge M.S. sheet with outer in suitable angle and stiffener at the rear side of MS flat supported on M.S. channel ISMC height from the G.L. and 1m.

Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick (gareware or equivalent )including the cost of all materials, labour, lead, lift, T&P, etc. Complete.

Providing false ceiling by using 12mm thick perfonated gypsum board using 16 gauge aluminium "T" and "L" including all materials, labour, lead and lift etc., complete.

Supplying and sticking the name stickers in doors identifying the rooms including cost of material, labour etc. complete.

Providing locking arrangements with 6 lever Godrej lock with 2 keys including cost of all materials, labour, lead and lift etc., complete.

Providing Sintex water tank of capacity of 1000 lits including cost of material, labour, lead, lift, transportation and placing in position over head room etc., as directed by the engineer at site.

Manufacturing,supplying and fixing of Stainless steel Hand rail for staircase using 50mm dia 304l grade stainless steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mmdid stainless steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 nos of 25mm dia intremediate horizondal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100x100x6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges etc,complete

PROVIDNG INSPECTION CHAMBERS 600X600 IN DEPTH VARYING 0.60M including cost of all material, labour, lead, lift etc., complete

Supplying and fixing MS channels, Angles and chequred plates of 8mm thick.for the cable duct inside the control room including cost of all labour lead, lift, etc., complete.

Supplying and filling with Approved Gravel including cost of Materials, labour for filling, spreading, consolidation, lead, lift, etc complete as directed by the Engineer at site

Supplying and fixing of MS steel door of required size fixed in outer and door frame in MS angles 50 X 6 mm and providing necessary MS flat 8 X 6 mm for door shuter fixed with 18 guage of MS sheet including locking arrangements labour lead, lift etc., complete.

Providing two legged scafolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both rows with two horizontal posts with 0.5 M Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc.in a complete from using coil and nails. Height upto 12.50 mts

Providing two legged scafolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both rows with two horizontal posts with 0.5 M Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc.in a complete from using coil and nails.Height upto 3.75mts

Providing Heritage flaks finish for the exterior surface of building of approved colour at all elevation including cost of all materials, lead, lifts, labour, Scaffolding, equipments, sprayer, tools and mixed proprely as per the manufactures reccommantation, apply and finish properly etc complete.

Designing the semi unitised structural glazing system with open groove joint as per design intent, preparation of shop drawings for approval,supply,fabricate,erect,as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by Dept. Officials.) Design the framing system (i.e. male & female frame) to support vision panels,spandrel panels either with glass or continuous framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision pannel proposed with either insulated/monolithic glass,groove width in the system both in horizondal and vertical shall not be more than 20mm. Glazing of pannel shall be done only at factory at the controlled atmosphere.

Labour charges for Chequred plate 8mm thick, for cable duct top including cost of all labour, lead,lift cutting , welding, fixing, all T&P complete etc.,

Labour charges for RS Joist 100x 65 x 6mm for cable duct top including cost of all labour, lead,lift cutting , welding,dying, fixing, all T&P complete etc.,

Labour charges for MS flat 75mm x 12mm thick, using control room earth mat including cost of all labour, lead,lift cutting , welding,dying, fixing, all T&P complete etc.,

Paving the approach to building, sides of roads, between building and setback area with Pave-it Rubber Moulded Hydraulic Pressed Paver interlocking block of 83mm thick of approved quality and colour over 100mm thick bed of filling sandcompacting properly with surface vibrator finishing neatly including cost of all materials, labour, T&P, lead, lift etc. complete.

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed multistrand Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator). (SD 22)

Supply and run of 2x 1.5 sq.mm (22/0.3) PVC insulated SC unheathed cu.conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. (SD 43)

Supply and run of 2x1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed copper conductor of 1100 V grade. (SD 67)

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated Multi strand unsheathed Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113 mm Steel switch box for 5 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. (SD 34)

Wiring with 2 x 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150 mm x 100 mm x 113 mm Steel switch box with 3 mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion, with suitable colour for concealed power plug point. (SD 38)

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work. (SD 167)

Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only. (SD 163)

Supply and fixing of single flu. fitting complete with LED light with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with flu. tube. 4' X 20w Single Industrial type fitting SD 92

Supply and fixing of 4'x28 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes. (SD 91)

Supply and fixing of CFL bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for incandescent lamp with guard and 100 W bulb. (SD 81)

Supply and fixing of fancy glass shade and 18 W CFL for BH point. (SD 77)

Supply and fixing of 1200 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. (SD 107)

Supply and fixing of 375 mm (15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall. -SD-116

Supplying and fixing of RCCB safe trip of appd ISI make /equivalent quality, 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make). (SD 173)

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 12 mm complete with necessary masonry work. (SD 228)

Supplying and installation of 5 star rated inverter split Air Conditioner (3 phase -2 Ton capacity) of approved make (O General/Carrier/ Voltas or equivalent) with all accessories including stabilizer with reputed make including cost of all materials, leads, lift, fixing charges, etc., complete as per standared specification complete.

Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make]. (SD 134-B)

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work. (SD 169)

Supplying and fixing of 4 pole 20 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete.

Supplying and laying 25 mm dia PVC pipe of approved quality for AC unit water drain pipe including cost of all materials, lead, lift, labour charge, etc., complete.

Drilling 4½" dia hole in brick wall for providing cables for out door condencing unit including cost of all materials, lead, lift, labour charge, etc., complete. 100 mm dia

Drilling 4½" dia hole in brick wall for providing cables for out door condencing unit including cost of all materials, lead, lift, labour charge, etc., complete.50 mm dia

Supplying and fixing 25 mm dia G I pipe for laying cable from AC panel to 100 A main box including cost of all materials , lead, lift, labour charge etc., complete.

Supplying and fixing 5/8" copper tube for connecting AC panel to AC out door unit including cost of all materials, lead, lift, labour charge, etc., complete.

Laying fixing if Controflex compound in around window / ventilator for protection of rain water.

Drilling of 12" dia. Vertical borewell so as to have a finished size of 6" dia. Bore well in Boulder area to any required depth as decided by the TWAD Board officers by direct rotany mud circulation method using contractor's rigs, tools, labour drilling mud water required etc., for drilling various places as directed by the departmental officers (water available within a lead of 1.5Km) drilling borewell upto 100m depth below GL.

Reaming from 175/200 mm dia pilot bore up to required depth below ground level as directed by the Engineer at site.

Labour charges for developing the bore well with air compressor of 300dpm capacity( mins. 8 hrs ) including labour,lead,etc.,complete and conducting yeild test by V notch method etc.,

Supplying of 150mm dia heavy duty PVC 6Kg/CM2 IST make casing pipe suitable size bore holes including cost of all materials, transport, labour charges, lead and lift etc., complete as drfiected by the department engineer at site.

Labour charges for inserting PVC casing pipe assembly with slotted and W/O. slotted in the drilled bore holes including jointing the PVC pipes and supply packing with annular space with pebbles of size and quantity including all cost of pebbles, conveyence,etc.complete.

Conducting and Fixing of bore well point by well qualified geologist labour T & P including all lead lift etc complete as directed by the department engineer at site.

Supplying and erection of 2HP mono black 3 phase electrical motor of approved brand with all related accessories as per ISI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L& T Make starter with guard and providing earthing to main with NO.8 Tinned copper wire rod and and 6" long 40mm dia GI pipe for earting and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with plating motor over bed, labour charge for placing motor over bed all materilas lead and lift etc, complete as driected by the department engineer at site.

Supplying and erection of 3HP air compresser Submergable 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with starter with guard and providing earthing to main with SWG TC wire and 6" long 40mm dia GI pipe for earting and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with plating motor over bed, by concrete with plating, labour charge for placing motor over bed all materilas lead and lift etc, complete as driected by the department engineer at site.

Supplying and erection of 5HP air compresser 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with starter with guard and providing earthing to main with SWG TC wire and 6" long 40mm dia GI pipe for earting and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with plating motor over bed, by concrete with plating, labour charge for placing motor over bed all materilas lead and lift etc, complete as driected by the department engineer at site.

Supplying &Inserting 40mm dia HDPE roll pipe for inside the borewell with supporting clamp including cost of all materials, labour, lead & lift etc., complete as driected by the department engineer at site.

Supplying & Inserting 20mm dia HDPE roll pipe for air pipe inside the borwell with supporting clamp including all materials, labour, lead & lift etc., complete as directed by the department engineer at site.

Supplying and laying 20mm dia pipe for air pipe connecting borewell to motor including earthwork excavation, refilling necessary fittings, all materials, labour, lead and lift etc., complete as directed by the department engineer at site.

Supplying, laying of 50m dia PVC pipe with required PVC bend L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department engineer at site.

Supplying and fixing 150mm dia PVC Cap including cost of all materials, labour, lead, and lift etc., complete as directed by the department engineer at site.

Granolithic cement concerete M15 mix for floor finshing 20mm thick, using stone shippings of 10mm size and below incluidingcost of all labour,lead,lift etc., complete.

Supplying and fixing black granatie stone Engraved foundation detailed year of construction fixing in wall at entrance digital wall clock 2os, floor coir mat 2000x600 for entrance 1000x500 -2Nos for office of approved make and quality including cost of all materials, lead, lift,etc., complete

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. S Type chair (Local rate)

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Three drawer steel table

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Steel side rack open type 4 self

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Steel half bench

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Revolving Chair

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Operator Table 6'x5'

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. PVC armed Chair of reputed make

CGST in % (For Bidders inside TamilNadu)

SGST in % (For Bidders inside TamilNadu)

IGST in % (For Bidders outside TamilNadu)