SPECIAL REPAIS TO LAUNDRY EQUIPMENTS AGAINST BER AT OTA CHENNAI UNDER GE STM CHENNAI

Amount

Dismantling / taking down the complte BER washing machine side loading heavy duty -3 Nos alongwith Hydro exteractor each 50 Kg capacity -04 Nos by disconnecting and removing all electricalconnections and water connections, removing the machine from the existing location of site and shifting and transporting to MES store yard for depositingthe same complete (Total old machines (3+4) =7 Nos) all as specified and directed.Note:Necessary RV for old BER washing machine shall be kept on record.

Supply installation testing and commissioning industrial new generation washer extractor of capacity not less than 60kg with high speed extraction, front loading and unloading, fully suspended soft mount type, stainless steel construction, fully programmable PLC- store 24wash programs with a large LCD display showing complete massage information of the program, pause and continue features are provided in case of power outage, the present programs can be easily modified, single motor 785 RPM with visible frequency inverter drive renders various speed for washing distribution and low, medium, high spin extraction, capable controls electric peak load demands, High torque inverters and heavy duty motors ensure high efficiency and low power consumption,provided with 5 stainless steel chemical compartments, inbuilt heater 27KW, heavy duty including with complete accessories and interconnecting the water inlet pipe drain pipe and valves,steam inlet valves,strainer including with complete accessories and necessary PCC foundation 1:2:4 and exhaust ducting as required etc. all as Manufactures recommendation and all as specified and directed.. Make: IFB, Model: IWE-60 (RVWE-60) (HSN CODE - 84514099), STEFAB Model No: AXE60, Electrolux Model No: W5600 (a) Capacity upto 60 kg dry weight of 100% cottonsper charge ,volume 620 ltrs. (b) Outer cabinet Stainless steel front sides top & back covers of 1.22mm thickness die pressed S S front & door with electromagnetic door interlock. (c) Outer drum stainless steel of S S304 quality & of 3 mm thickness,diameter of drum 765 mm. (d) Inner cylinder stainless steel perforated inner cylinder of SS 304 quality & of 2 mm thickness coned S S back-end-plate with taper S S bush at the center carbon steel shall not be used anywhere on the cylinder contineous S S welding statically and dynamically balanced.

(e) bearing housing : GG25 cast iron bearing housing with 2 No’s made of SKF Heavy duty taper roller bearings packed with auto lubricants & sealed. V- Ring seal arrangements for water tightness with self-lubricating arrangement. One seal for lubricant tightness of bearings. (f) Drive single motor with variable frequency inverter drive for various speeds for wash distibution low normal & high spin extract. (g) fully programmeble PLC with 24 customized or present processors with step by step LCD instruction for cycle advance variable time signal process modification and dignostics checks (h) Soap dispenser SS 316 5 compartment in built soap dispenser ech fitted with independent water solenoid valve & pressure jet. (j) Basket size Dia. 1020 x 760 depth/over all dimension 1350W x 1500D x 1950H in mm. (k) Basket volume 620 (l) Final extract speed RPM 785 (m) G force at final extract Gcs 350 (n) Motor 11.2 KW 415V, 3 phase AC,50HZ (o) Moister retension after final extracton approx. 70%

(p) Clear door opening 670 mm Dia (q) Water inlet 40 mm (1.5 " BSP) solenoid valve operated. (r) Steam inlet 15mm solenoid valve operated/80kg per cycle (s) Drain 76 mm (3'' BSP) drain valve (t) Overall diemension : 1370W x 1650D x 1950H in mm. (u) Electric supply 415 V +/- 10%, 3 phase + N, 50 HZ AC. (v) Hydraulic rubber hose 40 mm dia,1250mm length -2 nos (w) Hydraulic rubber hose 20 mm dia ,1250mm length -1 nos with both side metallic Hex Nipple (x) Suitable air compressor for numetric valve control of the washing machine. Note :- (i) Quoted rate shall be inclusive of necessary PCC platform / foundation as specified and as per manufacturer instructions and recommendation.(ii) Quoted rate shall be inclusive for breaking / dismatling the existing old platform of any descrription as per site condition and disposing off the debris away from MD land as directed by Engineer-in-Charge at site. (iii) Quoted rate shall be inclusive for stainless steel trolley of size 900 mm x 600 mm x 900 mm with bucket to with stand the capacity of minimum 50 Kg for wet clothes.

S&F wall mounted MCCB 100 Amps 415 V ,16 KA with steel enclosure, fixed on wall duly grouted in solid block wall with electrical connection complete all as specified and directed.

S&F GI tubing medium grade 50 mm dia with all fittings such as bends, sockets, elbows, tees, reducers, unions, sockets complete laid in floors or fixed to walls all as specified.

S&F GI tubing medium grade 40mm dia with all fittings such as bends, sockets, elbows, tees, reducers, unions, sockets complete laid in floors or fixed to walls all as specified.

S&F GI tubing medium grade 20mm dia with all fittings such as bends, sockets, elbows, tees, reducers, unions, sockets complete laid in floors or fixed to walls all as specified.

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 40mm dia and fixed

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20mm dia and fixed

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 50mm dia and fixed

S&F Drain out pipe GI tubing medium grade100mm (4") dia with all fittings such as bends, sockets, elbows, tees, reducers, unions, sockets complete laid in trenches/ floors or fixed to walls all as specified.

M&L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 m below normal ground level with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised iron/steel strip of size 32X6 mm by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete including testing on completion all as specified and directed.

Global Safety Engineering and Management Solutions (BID ID -3355652)

devan enterprises (BID ID -3353676)

Leo Enterprises (BID ID -3357775)

shakti engineering and electrical works (BID ID -3357843)